NC need a/c parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**anew4961** · 10-02-2019, 06:02 PM

i need a fresh air door that mounts in cowl with vacuum pot and bracket and plastic parts to mount it also need the right vent vacuum pot and brackets and arm also need a/c wiring harness. thanks

**1rippen6** · 10-02-2019, 07:42 PM

I may have everything but I can't look until Friday. Not wait if you find what you need.

**anew4961** · 10-02-2019, 07:58 PM

Quote:

Originally Posted by 1rippen6

I may have everything but I can't look until Friday. Not wait if you find what you need.

just let me know what you have and pictures

*randy500* · 10-02-2019, 08:04 PM

A guy on ebay is reproducing the cowl flapper bushing and nut that mounts through the firewall.
https://www.ebay.com/itm/New-1967-19...t/233182508275
Fairly hard part to find in good condition.

**Stocker** · 10-02-2019, 11:42 PM

I believe LMC has some of what you want (kinda hard to find). http://www.lmctruck.com/icatalog/CB/full.aspx?Page=172

**anew4961** · 10-03-2019, 05:15 PM

still looking if you have any of these parts let me know

*randy500* · 10-03-2019, 06:07 PM

Cowl flap with vac pod, screws and plastic parts, firewall bushing is pictured to show what it looks like, you will have to buy one off ebay, mine is broken and i dont sell those, $50
Inside fresh air door vac pod, link, link retainers, vac pod bracket and bracket that mounts to vent door, with screws, $50
Wiring harness, one soldered and heat shrink splice on control panel bulb grey wire, $75
Shipping $15.

**Madkidd007** · 10-03-2019, 06:11 PM

No harness though

**62cdan** · 10-03-2019, 08:26 PM

I should have the harness...

**anew4961** · 10-03-2019, 11:30 PM

parts have been found thanks for the reply's

**Sheepdip** · 10-03-2019, 11:33 PM

Quote:

Originally Posted by Madkidd007

No harness though

Need Center Pic Parts for Cowl Door
Bracket for vacuum pot, "L" actuator lever and plastic bushing.

http://67-72chevytrucks.com/vboard/s...d.php?t=794399

**Madkidd007** · 10-03-2019, 11:53 PM

Quote:

Originally Posted by Sheepdip

Need Center Pic Parts for Cowl Door
Bracket for vacuum pot, "L" actuator lever and plastic bushing.

http://67-72chevytrucks.com/vboard/s...d.php?t=794399

Try Anew4961, he has some.

**anew4961** · 10-04-2019, 02:29 PM

Quote:

Originally Posted by Madkidd007

No harness though

will take them payment sent

**anew4961** · 10-04-2019, 04:12 PM

Quote:

Originally Posted by 62cdan

I should have the harness...

payment sent thanks

10-02-2019, 06:02 PM	#1
anew4961 Senior Member Join Date: Jun 2017 Location: burlington north carolina Posts: 1,030	need a/c parts i need a fresh air door that mounts in cowl with vacuum pot and bracket and plastic parts to mount it also need the right vent vacuum pot and brackets and arm also need a/c wiring harness. thanks Last edited by anew4961; 10-02-2019 at 06:11 PM.

10-02-2019, 07:42 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: need a/c parts I may have everything but I can't look until Friday. Not wait if you find what you need.

10-02-2019, 08:04 PM	#4
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: need a/c parts A guy on ebay is reproducing the cowl flapper bushing and nut that mounts through the firewall. https://www.ebay.com/itm/New-1967-19...t/233182508275 Fairly hard part to find in good condition.

10-02-2019, 11:42 PM	#5
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,497	Re: need a/c parts I believe LMC has some of what you want (kinda hard to find). http://www.lmctruck.com/icatalog/CB/full.aspx?Page=172 __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

10-03-2019, 05:15 PM	#6
anew4961 Senior Member Join Date: Jun 2017 Location: burlington north carolina Posts: 1,030	Re: need a/c parts still looking if you have any of these parts let me know

10-03-2019, 06:07 PM	#7
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: need a/c parts Cowl flap with vac pod, screws and plastic parts, firewall bushing is pictured to show what it looks like, you will have to buy one off ebay, mine is broken and i dont sell those, $50 Inside fresh air door vac pod, link, link retainers, vac pod bracket and bracket that mounts to vent door, with screws, $50 Wiring harness, one soldered and heat shrink splice on control panel bulb grey wire, $75 Shipping $15. Attached Images

10-03-2019, 06:11 PM	#8
Madkidd007 Senior Member Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,236	Re: need a/c parts No harness though Attached Images __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

10-03-2019, 08:26 PM	#9
62cdan Senior Member Join Date: Mar 2016 Location: Belleville, IL Posts: 241	Re: need a/c parts I should have the harness... __________________ 1964 C-10 SWB Fleetside 6cyl/ Stick 1968 C-10 SWB Fleetside 355/Turbo 400 1970 GMC 5500 Dump Truck 401 V6 1971 K5 Blazer CST 4WD 350/ 350 1971 C-30 Longhorn 350 / 4 Speed 1972 K-10 SWB Fleetside 350/ 4 Speed 1972 GMC SWB Fleetside 6cyl/ Stick 1979 K/10 SWB Fleetside 350/350

10-03-2019, 11:30 PM	#10
anew4961 Senior Member Join Date: Jun 2017 Location: burlington north carolina Posts: 1,030	Re: need a/c parts parts have been found thanks for the reply's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.