Blazer inside tire carrier - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 11-21-2023, 05:48 PM

I initially posted this under the what it's worth section as I plan on selling it but that area doesn't get much traffic. This is actually square body but very close to the 69 to 72 style. If any of you see this post and can respond under The WIW section I would appreciate it

**maldo** · 11-21-2023, 11:51 PM

I saw one at goodguys swap meet last month . That person was asking $150.00

**1774btcrew** · 11-22-2023, 12:18 AM

Quote:

Originally Posted by maldo

I saw one at goodguys swap meet last month . That person was asking $150.00

Thanks do you know if it was a square body one or the 69 and 72 style? I have looked on eBay and only saw 69 to 72 style that they were wanting to get $1,500 for and a square body one it was listed as 69-72 that sold for $750 complete. I sold one quite a few years back for $350.

**396ci** · 12-01-2023, 10:45 AM

I had one for sale similar to yours with the 3 holes on each side of the floor mount. A guy at the swap meet said that it came out of a van and not a blazer (never could confirm). But mine did have the long vertical slot for the tire bolt instead of the two separate holes like yours. I would say they are still forth about $400-$600 depending on how bad someone wants it. (pic from internet for reference on bolt slot)

**1774btcrew** · 12-01-2023, 11:56 AM

I have been around a lot of vans and never seen that style in one. I suppose anything is possible. It looks like there's three different ones that are essentially the same then. One with the long slotted hole and four mounting holes, long slotted hole and six mounting holes, and two holes with six mounting holes.

**1774btcrew** · 12-01-2023, 11:58 AM

Quote:

Originally Posted by 396ci

I had one for sale similar to yours with the 3 holes on each side of the floor mount. A guy at the swap meet said that it came out of a van and not a blazer (never could confirm). But mine did have the long vertical slot for the tire bolt instead of the two separate holes like yours. I would say they are still forth about $400-$600 depending on how bad someone wants it. (pic from internet for reference on bolt slot)

To me yours looks identical at the bottom to the 72 style with the exception of having six mountain holes

**maldo** · 12-02-2023, 03:07 AM

The one I saw at goodguys was to a square body, with two 3/8 holes, the one in my 72 blazer has a long slot. The slotted one go's for $400-$600 and square body style I found foe $150.00.

**Gary 70 Jimmy** · 12-03-2023, 09:26 PM

Quote:

Originally Posted by 396ci

I had one for sale similar to yours with the 3 holes on each side of the floor mount. A guy at the swap meet said that it came out of a van and not a blazer (never could confirm). But mine did have the long vertical slot for the tire bolt instead of the two separate holes like yours. I would say they are still forth about $400-$600 depending on how bad someone wants it. (pic from internet for reference on bolt slot)

That's my spare tire rack in my 1970 jimmy.

**Moreyel** · 12-07-2023, 02:03 PM

I may be interested in trading my outside reat carrier for an inside one.

I haven’t looked at values.

**1970cstblazer** · 12-08-2023, 08:23 AM

You will have sticker shock. Like most Blazer specific parts from '69-'72, this crap must be made of gold.

Glad mine is mint..

11-21-2023, 05:48 PM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Blazer inside tire carrier I initially posted this under the what it's worth section as I plan on selling it but that area doesn't get much traffic. This is actually square body but very close to the 69 to 72 style. If any of you see this post and can respond under The WIW section I would appreciate it Attached Images __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

11-21-2023, 11:51 PM	#2
maldo Senior Member Join Date: Nov 2015 Location: cali Posts: 692	Re: Blazer inside tire carrier I saw one at goodguys swap meet last month . That person was asking $150.00

12-01-2023, 10:45 AM	#4
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 761	Re: Blazer inside tire carrier I had one for sale similar to yours with the 3 holes on each side of the floor mount. A guy at the swap meet said that it came out of a van and not a blazer (never could confirm). But mine did have the long vertical slot for the tire bolt instead of the two separate holes like yours. I would say they are still forth about $400-$600 depending on how bad someone wants it. (pic from internet for reference on bolt slot) Attached Images __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

12-01-2023, 11:56 AM	#5
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Blazer inside tire carrier I have been around a lot of vans and never seen that style in one. I suppose anything is possible. It looks like there's three different ones that are essentially the same then. One with the long slotted hole and four mounting holes, long slotted hole and six mounting holes, and two holes with six mounting holes. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-02-2023, 03:07 AM	#7
maldo Senior Member Join Date: Nov 2015 Location: cali Posts: 692	Re: Blazer inside tire carrier The one I saw at goodguys was to a square body, with two 3/8 holes, the one in my 72 blazer has a long slot. The slotted one go's for $400-$600 and square body style I found foe $150.00.

12-07-2023, 02:03 PM	#9
Moreyel Active Member Join Date: Jun 2013 Location: Cedar Crest, NM Posts: 197	Re: Blazer inside tire carrier I may be interested in trading my outside reat carrier for an inside one. I haven’t looked at values. __________________ 72 Blazer, 70 El Camino SS, Anniversary HD FatBoy, 2012 Ram 3500 4WD Dually, 17 Dodge Challenger, 80 Vette, 65 Chevy 3/4 Ton 4 W/D Pickup and some more. Wife: 06 GMC Duramax 3500 4WD Single Wheel, 2016 BMW X3. Next: Rust removal on my Blazer. Thinking of putting a 50 Chevy cab on a 76 Chev 4 WD pickup. Members Met: Aldtime, DeadheadNM

12-08-2023, 08:23 AM	#10
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,287	Re: Blazer inside tire carrier You will have sticker shock. Like most Blazer specific parts from '69-'72, this crap must be made of gold. Glad mine is mint.. __________________ 1970 K/5 Blazer CST 4WD, Bronze, 93k ACT. miles, 350, 4 speed, positraction, 16.5" x 8.25" wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration in progress... 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 41k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 60k miles, 3.6, 8L45, 3.23 LS, 18" wheels



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.