AZ 72 Blazer for parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 12-03-2016, 10:30 PM

Thanks Tom - LMK when poss. Pete

**Curtb1971** · 12-03-2016, 10:53 PM

Hey Tom,
If any chance you'll be cutting up the body I could use the bucket seat reinforcement crossmember.
Thanks Curt

Stagerunner · 12-04-2016, 02:06 PM

Looking for rear section of floor pan rear of the Trans hump that would include all of the seat braces. Shipping would be to 63021

**gmc 2500 4x4** · 12-05-2016, 05:37 AM

is that a factory overflow bottle on ac box? intrested

flyingcubby · 12-09-2016, 06:52 PM

Is there a skid plate for the trasfer case...Thanks

Rex10 · 12-10-2016, 09:20 PM

Update?

**t korinek** · 12-11-2016, 07:33 PM

Here's a few pics of the #s rex, it might be easier if you told me what # your looking for on the Manifolds & alternator, I have more lying around, looks like 2 RH manifolds.

GMC2500 dont think its factory, here's a pic, there is a screw in the side of it.

Flying cubby I'll have to look for the skid plate

Rex10 · 12-12-2016, 03:12 PM

I'm looking for casting/part #'s

3932469-(L.H.)
3905364-(R.H.)
3989055- (L.H.)
3896956-(R.H.)
I'm assuming that 2 of these 4 listed casting/part #'s are for a 2wd and the other are for a 4wd both would have been used on a SBC 350. The only way i can tell apart on a 2wd and a 4wd exhaust manifold is on the drivers side. the 2wd is curved and a 4wd is straight.
Let me know what you have and i will do more research on which 2 of the 4 i need.
As for the alternator there are 2 different models that would have came on a Blazer.
1102459 42 amp new #
1102455 61 amp new #

If rebuilt the part #'s will be,
1963777 42 amp rebuilt #
1969257 61 amp rebuilt #

dirish · 12-12-2016, 06:53 PM

As for the alternator there are 2 different models that would have came on a Blazer.
1102459 42 amp new #
1102455 61 amp new #

If rebuilt the part #'s will be,
1963777 42 amp rebuilt #
1969257 61 amp rebuilt #[/QUOTE]

Mine is 1102452 original to my knowledge.
1972 K5 4x4

Rex10 · 12-12-2016, 07:23 PM

My factory Chevrolet parts catalog call out the specific i have listed.

**DaHos** · 12-14-2016, 02:25 PM

Auto shift linkage available?

**D.PASSMORE** · 12-19-2016, 10:04 PM

Any luck on the ebrake parts Tom?

**t korinek** · 12-20-2016, 12:56 AM

I'll try to get back at this tomorrow

12secondnova · 12-20-2016, 01:30 PM

How is the passenger door? Looking for a near perfect one.

**t korinek** · 12-22-2016, 11:14 AM

12 second nova, unfortunately doors are far from perfect.

Passmore, so far I have the intermediate cable, which other pieces did you need?

Dahos I have the shift linkage rod, the part that connects to it & the part that bolts to the frame. $100 shipped. I have the linkage piece that bolts to the trans with the spring new for $15

Rex10, sorry no luck on the alternator or manifolds, I had 3 pair that were pulled from blazers & every one is a 469 R/H !

**D.PASSMORE** · 12-22-2016, 12:07 PM

Quote:

Originally Posted by t korinek

12 second nova, unfortunately doors are far from perfect.

Passmore, so far I have the intermediate cable, which other pieces did you need?

Dahos I have the shift linkage rod, the part that connects to it & the part that bolts to the frame. $100 shipped. I have the linkage piece that bolts to the trans with the spring new for $15

Rex10, sorry no luck on the alternator or manifolds, I had 3 pair that were pulled from blazers & every one is a 469 R/H !

Send a PM... thanks

ochre1971 · 12-27-2016, 10:46 AM

Speedo needle available?

**7D2N** · 12-31-2016, 02:13 PM

I could use the the plastic door cap pieces that the glass guides to. They attach to the top cut part of the doors. if they are useable please let me know a cost and ship to Ut.

Thanks

jbasham · 01-10-2017, 12:58 AM

I'm interested in the transfer case shifter shipped to 93555. Let me know thanks

redneckvette · 01-11-2017, 02:39 PM

Would you sell the lever for the 4wd? And how much shipped to 53140. Thanks Adam.

domg · 01-13-2017, 12:30 AM

Could I come take a look at what's left? I'm a local

**D.PASSMORE** · 01-13-2017, 08:22 AM

Quote:

Originally Posted by D.PASSMORE

Send a PM... thanks

I'm out...

**gpat@earthlink.net** · 01-15-2017, 10:43 PM

Tilt Steering column still available ? Price to ship to South Carolina. Thanks

jaros44sr · 01-17-2017, 12:25 PM

Tom, any chance you could look for a bunch of rear wire harness clips for me. Everythin I've bought so far are rusty POS

Deerelindel · 01-17-2017, 06:27 PM

how much for both front park lamp assembly if in good shape and shipping 48134 thanks

12-03-2016, 10:30 PM	#26
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,299	Re: 72 Blazer for parts Thanks Tom - LMK when poss. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

12-03-2016, 10:53 PM	#27
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: 72 Blazer for parts Hey Tom, If any chance you'll be cutting up the body I could use the bucket seat reinforcement crossmember. Thanks Curt

12-04-2016, 02:06 PM	#28
Stagerunner Registered User Join Date: Feb 2015 Location: St. Louis, mo Posts: 66	Re: 72 Blazer for parts Looking for rear section of floor pan rear of the Trans hump that would include all of the seat braces. Shipping would be to 63021

12-05-2016, 05:37 AM	#29
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: 72 Blazer for parts is that a factory overflow bottle on ac box? intrested

12-09-2016, 06:52 PM	#30
flyingcubby Registered User Join Date: Jul 2013 Location: Converse, Texas Posts: 98	Re: 72 Blazer for parts Is there a skid plate for the trasfer case...Thanks

12-10-2016, 09:20 PM	#31
Rex10 Registered User Join Date: Jun 2016 Location: Alpine, Oregon Posts: 24	Re: 72 Blazer for parts Update?

12-11-2016, 07:33 PM	#32
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 72 Blazer for parts Here's a few pics of the #s rex, it might be easier if you told me what # your looking for on the Manifolds & alternator, I have more lying around, looks like 2 RH manifolds. GMC2500 dont think its factory, here's a pic, there is a screw in the side of it. Flying cubby I'll have to look for the skid plate Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-12-2016, 03:12 PM	#33
Rex10 Registered User Join Date: Jun 2016 Location: Alpine, Oregon Posts: 24	Re: 72 Blazer for parts I'm looking for casting/part #'s 3932469-(L.H.) 3905364-(R.H.) 3989055- (L.H.) 3896956-(R.H.) I'm assuming that 2 of these 4 listed casting/part #'s are for a 2wd and the other are for a 4wd both would have been used on a SBC 350. The only way i can tell apart on a 2wd and a 4wd exhaust manifold is on the drivers side. the 2wd is curved and a 4wd is straight. Let me know what you have and i will do more research on which 2 of the 4 i need. As for the alternator there are 2 different models that would have came on a Blazer. 1102459 42 amp new # 1102455 61 amp new # If rebuilt the part #'s will be, 1963777 42 amp rebuilt # 1969257 61 amp rebuilt #

12-12-2016, 06:53 PM	#34
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: 72 Blazer for parts As for the alternator there are 2 different models that would have came on a Blazer. 1102459 42 amp new # 1102455 61 amp new # If rebuilt the part #'s will be, 1963777 42 amp rebuilt # 1969257 61 amp rebuilt #[/QUOTE] Mine is 1102452 original to my knowledge. 1972 K5 4x4

12-12-2016, 07:23 PM	#35
Rex10 Registered User Join Date: Jun 2016 Location: Alpine, Oregon Posts: 24	Re: 72 Blazer for parts My factory Chevrolet parts catalog call out the specific i have listed.

12-14-2016, 02:25 PM	#36
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 72 Blazer for parts Auto shift linkage available? __________________ 1967 C10 SWB Owner - Rustbelt Restorations

12-19-2016, 10:04 PM	#37
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: 72 Blazer for parts Any luck on the ebrake parts Tom?

12-20-2016, 12:56 AM	#38
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 72 Blazer for parts I'll try to get back at this tomorrow __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-20-2016, 01:30 PM	#39
12secondnova Registered User Join Date: Mar 2013 Location: norcal Posts: 673	Re: 72 Blazer for parts How is the passenger door? Looking for a near perfect one.

12-22-2016, 11:14 AM	#40
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 72 Blazer for parts 12 second nova, unfortunately doors are far from perfect. Passmore, so far I have the intermediate cable, which other pieces did you need? Dahos I have the shift linkage rod, the part that connects to it & the part that bolts to the frame. $100 shipped. I have the linkage piece that bolts to the trans with the spring new for $15 Rex10, sorry no luck on the alternator or manifolds, I had 3 pair that were pulled from blazers & every one is a 469 R/H ! __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

12-27-2016, 10:46 AM	#42
ochre1971 Registered User Join Date: Apr 2016 Location: Charlotte, NC Posts: 59	Re: 72 Blazer for parts Speedo needle available?

12-31-2016, 02:13 PM	#43
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 652	Re: 72 Blazer for parts I could use the the plastic door cap pieces that the glass guides to. They attach to the top cut part of the doors. if they are useable please let me know a cost and ship to Ut. Thanks __________________ Just for the fun of it Last edited by 7D2N; 12-31-2016 at 09:02 PM.

01-10-2017, 12:58 AM	#44
jbasham Registered User Join Date: Jan 2017 Location: Ridgecrest, CA Posts: 5	Re: 72 Blazer for parts I'm interested in the transfer case shifter shipped to 93555. Let me know thanks

01-11-2017, 02:39 PM	#45
redneckvette Registered User Join Date: Jul 2012 Location: kenosha wi Posts: 13	Re: 72 Blazer for parts Would you sell the lever for the 4wd? And how much shipped to 53140. Thanks Adam.

01-13-2017, 12:30 AM	#46
domg Registered User Join Date: Feb 2016 Location: Phoenix, AZ Posts: 5	Re: 72 Blazer for parts Could I come take a look at what's left? I'm a local

01-15-2017, 10:43 PM	#48
gpat@earthlink.net Active Member Join Date: Jan 2011 Location: columbia, SC Posts: 156	Re: 72 Blazer for parts Tilt Steering column still available ? Price to ship to South Carolina. Thanks

01-17-2017, 12:25 PM	#49
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,426	Re: 72 Blazer for parts Tom, any chance you could look for a bunch of rear wire harness clips for me. Everythin I've bought so far are rusty POS __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-17-2017, 06:27 PM	#50
Deerelindel Registered User Join Date: Dec 2014 Location: Flat Rock Michigan Posts: 76	Re: 72 Blazer for parts how much for both front park lamp assembly if in good shape and shipping 48134 thanks __________________ 1968 GMC 1 ton 4*4 with Detroit Diesel 6v53t 9ft stepside 1978 Chevrolet C50 350sb 8ft fleetside

Register or Log In To remove these advertisements.