Color Wiring Diagram FINISHED - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69time · 04-21-2009, 01:33 PM

Can anyone tell me of another wire that supplies 12 volts (only when ignition is on) other than the ignition wire? Trying to connect my holley 600 autochoke wiring without stealing the power from my distributor..

blukangoo · 04-22-2009, 04:39 PM

I would just leave it like it is. The choke doesn´t use that much power.
The only other spot in the engine compartment is from the starter but that´s where the coil gets it´s power too.

blukangoo · 04-22-2009, 04:46 PM

Tried to get a picture in but I can´t edit after 5 Minutes.
Here it is.
I have an Edelbrock and I get the power from the coil too and she runs fine.

fixit-p · 04-22-2009, 05:13 PM

Quote:

Originally Posted by 69time

Can anyone tell me of another wire that supplies 12 volts (only when ignition is on) other than the ignition wire? Trying to connect my holley 600 autochoke wiring without stealing the power from my distributor..

On my 69 I got my power from the hot side of my TH400 kick down if you have a turbo 400 with electric kick down you could do the same I stayed away from the coil because the heater element is a resistive load.

Primed67 · 09-08-2009, 02:39 PM

ok, I'm re-wiring my truck with a painful, I mean painless kit. i have figured most of the stuff out with the help of the diagrams on here. Much thanks for that but I still have a question. It shows the cluster with dummy lights installed and higher up on the page, the layout of the cluster with guages. There are 2wires i'm confused on the blk/brn ones; one says to the alternator and the other says to the terminal by the battery. I imagine i will have to run a few new wires. I have done the changeover to an internaly regulated alternator so what post does this wire need to be run to or where do I tie it in? The wire to the terminal by the battery, does it just run to the junction box? Thanks in advance and great job on the diagrams!!

ka24deroadster · 09-21-2009, 03:39 PM

On my truck and the wiring diagram there is a black wire that runs from the firewall junction block to the junction block next to the battery. There is a black/white wire that runs from the firewall junction block and splices into the red Power wire that runs from the battery to the firewall. The diagram for the cab does not have anything shown for the terminal to the black and black/white wires. What do these wires do? Where do they go to under the dash?

blukangoo · 10-18-2009, 04:05 PM

Quote:

Originally Posted by ka24deroadster

On my truck and the wiring diagram there is a black wire that runs from the firewall junction block to the junction block next to the battery. There is a black/white wire that runs from the firewall junction block and splices into the red Power wire that runs from the battery to the firewall. The diagram for the cab does not have anything shown for the terminal to the black and black/white wires. What do these wires do? Where do they go to under the dash?

I´d say that these wires have been put in by a previous owner. The wires in Fransiscos Diagrams are Factory. I have found a few things missing in the diagram but haven´t had time to change them or let Fransisco know.

franciscocl7 · 11-03-2009, 08:34 PM

Quote:

Originally Posted by blukangoo

I´d say that these wires have been put in by a previous owner. The wires in Fransiscos Diagrams are Factory. I have found a few things missing in the diagram but haven´t had time to change them or let Fransisco know.

Blukangoo.....If you found something missing in the wiring diagram let me know, I´ve the main diagram draw it in AUTOCAD so I can modify it quickly. Then I will send the correct diagram for all you guys.

Francisco

blukangoo · 11-04-2009, 12:21 AM

Hi Francisco,

Long time no hear.

I have the plan in the shop where I made notes of the things I found.
As soon as I get to the shop I will write them down and let you know.

Sean

**70C10Toejam** · 04-23-2010, 07:20 PM

Quote:

Originally Posted by blukangoo

I´d say that these wires have been put in by a previous owner. The wires in Fransiscos Diagrams are Factory. I have found a few things missing in the diagram but haven´t had time to change them or let Fransisco know.

I was looking here for this same issue, they are factory wires and are in the diagram. Any ideas what they actually do???
Name: wiringdiagram2a.jpg
Views: 1103
Size: 74.1 KB

Name: wiringdiagram2a.jpg
Views: 1103
Size: 74.1 KB

SAILOR-ERL · 09-30-2009, 11:45 PM

is the diagram the same for the 73 c10 as well?? im looking for it im still cant find it.

Twisted78SS · 10-01-2009, 09:57 AM

From another thread, CaptKaos posted these from his site

http://forum.73-87chevytrucks.com/sm...?topic=11766.0

baller5040 · 11-04-2009, 01:16 AM

Anyone know where i can find a colored wire diagram for the year 1980 to 1986?? I have a 1982 and would like to get a diagram so that i can replace some wires if needed,

hotrodlover · 11-21-2009, 02:12 AM

Were could i find a wiring diagram on a 73-86 chevy One ton Crew cab the complete.

hotrodlover · 11-21-2009, 02:36 AM

hey your whole wiring diagram has a problem that cant be fixed in adobe when you try to download

blukangoo · 11-23-2009, 07:17 PM

Quote:

Originally Posted by baller5040

Will these diagrams work for the year 82 also or is there alot of diffrences?

I can´t answer that one for you.

Quote:

Originally Posted by hotrodlover

hey your whole wiring diagram has a problem that cant be fixed in adobe when you try to download

I just tested them again and opened them with Adobe Acrobat Reader 9.0 and they worked.

@ Francisco - I was in the shop a couple times since I wrote the last time and never remembered to look at the plan.
Here is what I can remember in the "Master Plan":

You could change the Heater wire to look like picture #1 and
maybe tell me what the wire is in picture #2.

Pic #1

Pic #2

Twisted78SS · 11-24-2009, 12:16 AM

I created a permanent web location for Truck data,

Here is the main directory,
http://www.2heeldrive.com/Chevrolet/

here is the link to the Wiring Diagrams

http://www.2heeldrive.com/Chevrolet/Wiring_Diagrams/

Bear with me as I migrate more info here..

Drew

hotrodlover · 11-24-2009, 02:43 AM

Quote:

Originally Posted by blukangoo

I can´t answer that one for you.

I just tested them again and opened them with Adobe Acrobat Reader 9.0 and they worked.

@ Francisco - I was in the shop a couple times since I wrote the last time and never remembered to look at the plan.
Here is what I can remember in the "Master Plan":

You could change the Heater wire to look like picture #1 and
maybe tell me what the wire is in picture #2.

Pic #1

Pic #2

Looks Like it is the Dimmer switch wire atleast that is what 18t is on the pdf files I downloaded.

blukangoo · 11-24-2009, 04:03 AM

18 is the wire guage and T is Tan. It´s not the wire for the dimmer switch.

It is just not logical the way the wire is. Is starts on the firewall and ends on the firewall and is not part of any curcuit.

@ Drew - Nice collection you got there! Thanks for hosting the diagrams for and from Francisco!

Here are the direct download links from Drew:

Master Plan
Engine & Front Lights
Rear Lighting
Bulkhead #1 (Cab)
Bulkhead #2 (Cab)

franciscocl7 · 02-24-2010, 02:50 PM

Hi blukangoo me again!!!
It seems that something is missing in that 18 gaugge tan wire, Im going to check the assembly manual to modify that mistake, if there exists.
As soon I check it I will send you the diagram..
Nice observation, the wiring digrama is every day better.
Francisco

Quote:

Originally Posted by blukangoo

18 is the wire guage and T is Tan. It´s not the wire for the dimmer switch.

It is just not logical the way the wire is. Is starts on the firewall and ends on the firewall and is not part of any curcuit.

@ Drew - Nice collection you got there! Thanks for hosting the diagrams for and from Francisco!

Here are the direct download links from Drew:

Master Plan
Engine & Front Lights
Rear Lighting
Bulkhead #1 (Cab)
Bulkhead #2 (Cab)

Edmond · 03-02-2010, 06:48 AM

Great post.
I can remember years ago I posted an AutoCAD version of the 67-72 schematic. (http://67-72chevytrucks.com/vboard/s...d.php?t=232796) (Not sure if the links are still working

)
But these PDF's are great to have. Thanks for posting them!

Cya,
Edmond
Dutch Longhorn

8)

actconstruction · 02-02-2011, 09:02 PM

Quote:

Originally Posted by Edmond

Great post.
I can remember years ago I posted an AutoCAD version of the 67-72 schematic. (http://67-72chevytrucks.com/vboard/s...d.php?t=232796) (Not sure if the links are still working

)
But these PDF's are great to have. Thanks for posting them!

Cya,
Edmond
Dutch Longhorn

8)

No, the links are not working. Do you still have this autoCAD document? It would be invaluable to me. I am making a few changes in different areas, and I think it would be great to be able to change the diagram around to match. Thanks in advance.

fixit-p · 02-02-2011, 09:50 PM

Quote:

Originally Posted by actconstruction

No, the links are not working. Do you still have this autoCAD document? It would be invaluable to me. I am making a few changes in different areas, and I think it would be great to be able to change the diagram around to match. Thanks in advance.

I also have the pfs' and would love a copy of the cad version if they are still available.

Earley · 03-21-2010, 05:19 AM

If someone could shoot me an email with the hi-res it would be greatly appreciated. Going to be rewiring here pretty soon and would be great to have. Thanks ahead!

kenneth.earley@okstate.edu

blukangoo · 03-22-2010, 04:24 PM

Quote:

Originally Posted by Earley

If someone could shoot me an email with the hi-res it would be greatly appreciated. Going to be rewiring here pretty soon and would be great to have. Thanks ahead!

kenneth.earley@okstate.edu

Hi Kenneth,

Just go up to Post #164 and download them from the links Drew posted.

Greetz from Germany
Sean

04-22-2009, 04:46 PM	#3
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: Color Wiring Diagram FINISHED Tried to get a picture in but I can´t edit after 5 Minutes. Here it is. I have an Edelbrock and I get the power from the coil too and she runs fine. Attached Images __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

09-08-2009, 02:39 PM	#5
Primed67 Registered User Join Date: Sep 2003 Location: Tyler Posts: 575	Re: Color Wiring Diagram FINISHED ok, I'm re-wiring my truck with a painful, I mean painless kit. i have figured most of the stuff out with the help of the diagrams on here. Much thanks for that but I still have a question. It shows the cluster with dummy lights installed and higher up on the page, the layout of the cluster with guages. There are 2wires i'm confused on the blk/brn ones; one says to the alternator and the other says to the terminal by the battery. I imagine i will have to run a few new wires. I have done the changeover to an internaly regulated alternator so what post does this wire need to be run to or where do I tie it in? The wire to the terminal by the battery, does it just run to the junction box? Thanks in advance and great job on the diagrams!! __________________ 1969 Chevrolet SWB Stepside 1959 Chevrolet apache * Sold 1967 Prostreet Chevy SWB Fleetside *Sold 2014 1/2 ton Crew Cab Chevrolet 4x4

09-21-2009, 03:39 PM	#6
ka24deroadster Registered User Join Date: May 2009 Location: windsor ca. Posts: 5	Re: Color Wiring Diagram FINISHED On my truck and the wiring diagram there is a black wire that runs from the firewall junction block to the junction block next to the battery. There is a black/white wire that runs from the firewall junction block and splices into the red Power wire that runs from the battery to the firewall. The diagram for the cab does not have anything shown for the terminal to the black and black/white wires. What do these wires do? Where do they go to under the dash?

11-04-2009, 12:21 AM	#9
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: Color Wiring Diagram FINISHED Hi Francisco, Long time no hear. I have the plan in the shop where I made notes of the things I found. As soon as I get to the shop I will write them down and let you know. Sean __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

09-30-2009, 11:45 PM	#11
SAILOR-ERL Registered User Join Date: Sep 2009 Location: bakersfield california Posts: 15	Re: Color Wiring Diagram FINISHED is the diagram the same for the 73 c10 as well?? im looking for it im still cant find it.

04-21-2009, 01:33 PM	#1
69time Registered User Join Date: Mar 2009 Location: Bacliff, Tx. Posts: 18	Re: Color Wiring Diagram FINISHED Can anyone tell me of another wire that supplies 12 volts (only when ignition is on) other than the ignition wire? Trying to connect my holley 600 autochoke wiring without stealing the power from my distributor..

04-22-2009, 04:39 PM	#2
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: Color Wiring Diagram FINISHED I would just leave it like it is. The choke doesn´t use that much power. The only other spot in the engine compartment is from the starter but that´s where the coil gets it´s power too. __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

10-01-2009, 09:57 AM	#12
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Color Wiring Diagram FINISHED From another thread, CaptKaos posted these from his site http://forum.73-87chevytrucks.com/sm...?topic=11766.0 __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

11-04-2009, 01:16 AM	#13
baller5040 Registered User Join Date: Nov 2009 Location: Provo, Utah Posts: 67	Re: Color Wiring Diagram FINISHED Anyone know where i can find a colored wire diagram for the year 1980 to 1986?? I have a 1982 and would like to get a diagram so that i can replace some wires if needed,

11-21-2009, 02:12 AM	#14
hotrodlover Registered User Join Date: Sep 2008 Location: Rose Hill Kansas Posts: 15	Re: Color Wiring Diagram FINISHED Were could i find a wiring diagram on a 73-86 chevy One ton Crew cab the complete.

11-21-2009, 02:36 AM	#15
hotrodlover Registered User Join Date: Sep 2008 Location: Rose Hill Kansas Posts: 15	Re: Color Wiring Diagram FINISHED hey your whole wiring diagram has a problem that cant be fixed in adobe when you try to download

11-24-2009, 12:16 AM	#17
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Color Wiring Diagram FINISHED I created a permanent web location for Truck data, Here is the main directory, http://www.2heeldrive.com/Chevrolet/ here is the link to the Wiring Diagrams http://www.2heeldrive.com/Chevrolet/Wiring_Diagrams/ Bear with me as I migrate more info here.. Drew __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

11-24-2009, 04:03 AM	#19
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: Color Wiring Diagram FINISHED 18 is the wire guage and T is Tan. It´s not the wire for the dimmer switch. It is just not logical the way the wire is. Is starts on the firewall and ends on the firewall and is not part of any curcuit. @ Drew - Nice collection you got there! Thanks for hosting the diagrams for and from Francisco! Here are the direct download links from Drew: Master Plan Engine & Front Lights Rear Lighting Bulkhead #1 (Cab) Bulkhead #2 (Cab) __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

03-02-2010, 06:48 AM	#21
Edmond Registered User Join Date: Jan 2000 Location: The Netherlands Posts: 1,062	Re: Color Wiring Diagram FINISHED Great post. I can remember years ago I posted an AutoCAD version of the 67-72 schematic. (http://67-72chevytrucks.com/vboard/s...d.php?t=232796) (Not sure if the links are still working ) But these PDF's are great to have. Thanks for posting them! Cya, Edmond Dutch Longhorn 8) __________________ 1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb 1974 Chevy Camaro Z28 (Original) ------------------------- Capelle a/d IJssel, The Netherlands

03-21-2010, 05:19 AM	#24
Earley Here to party Join Date: Mar 2010 Location: Yukon, Ok Posts: 94	Re: Color Wiring Diagram FINISHED If someone could shoot me an email with the hi-res it would be greatly appreciated. Going to be rewiring here pretty soon and would be great to have. Thanks ahead! kenneth.earley@okstate.edu __________________ 89 Shortwide 350/700r4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.