|
05-20-2002, 02:10 PM
|
#1 |
|
Registered User
Join Date: May 2002
Location: memphis Tn USA
Posts: 24
|
front disc brakes
I have a 69 SWB 350 chevy with front drums. I want to change to disc brakes. I have been told that disc brakes from a 70-87 will fit is that true. Has anyone done this that could give me some info.
|
|
|
|
05-20-2002, 02:19 PM
|
#2 |
|
Registered User
 Join Date: Feb 2000
Location: Georgetown, KY, USA
Posts: 631
|
What you want is the whole cross member from a 71 or 72. But you can also use one from a 73-87 or so. Get the whole crossmember, front brake lines, master cyc, booster, bracket, peddle push rod, & prop. valve. Also get all the steering..tie rods, center link, idler arm, take it loose at the pitman arm. there are 2 holes (one each side) that you have to enlarge to get them to line up if it is a 73 or later. Then swap it out.
------------------ Woody '69 Custom-10 Deluxe Short Fleetside,Factory 350cid/TH400,A/C,PS,PB,Carpet Coming soon 700R4, 350 Crate Engine, Pwr Disks... |
|
|
|
|
05-20-2002, 04:04 PM
|
#3 |
|
68cst_ss490
Join Date: May 2001
Location: edmonton,canada
Posts: 1,363
|
I just did this swap on my 68. I used a crossmember and other needed parts from a 79. Worked well. You will need to oblong 2 holes as wellas drill 2. The swap goes really well. Fits like it was made to be in there
------------------ Dean edmonton,canada 68 c10, project in works,350, th350, plain jane. SLOW AND STEADY GETS THE PANELS READY http://communities.msn.ca/MyChevytruckpage
__________________
Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
