The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-17-2018, 09:45 AM   #26
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Saturday I took the video gamers to the pick and pull to find a hydroboost off a Astro van. The boys ended up having a good time and we found what we were looking for. I don't think I can use the prop valve off of this, but we just took it all.
Attached Images
  
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 09-17-2018, 09:47 AM   #27
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Fabbed up the DBW gas pedal in the cab. I may adjust it some, but this will get us up and running. Need to put the column in and see if it interferes at all with my set up. One piece always leads to needing another piece.
Attached Images
   
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 09-17-2018, 09:50 AM   #28
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

I built a dolly for the bed. Building this thing in a small 2 car garage is a challenge, but I'm making it work. Then rolled her outside for some sunshine and cleaning.
Attached Images
   
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 09-17-2018, 04:22 PM   #29
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,930
Re: 1971 Stepside LS Build

That is an interesting master cylinder. do you have the info on what it came off of? I am using hydroboost with a standard looking master.
That's a good looking pedal mount as well.
Thanks
Dave
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline   Reply With Quote
Old 09-17-2018, 04:50 PM   #30
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Quote:
That is an interesting master cylinder. do you have the info on what it came off of?
I'm not sure I am going to use the master cylinder. I thought it looked interesting and looked pretty new. Thought it would fit the modern look of the LS better than the old style. It came off of a 1995 Chevy Astro Van. You can see her in the photo with the boys. I assume I will have to change out prop valves since I am disc/drum. I have two of the master cylinders if you are interested in one.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 09-18-2018, 08:45 AM   #31
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,930
Re: 1971 Stepside LS Build

I didn't have much luck with the older ones they seemed to want to leak. I am using one from a Tahoe that had hydroboost. I got at the parts store. I will need to look back at the year but what I found odd was that it still takes quite a bit of pedal pressure for the braking. It is very predictable so I have not done anything with it but you got to press pretty hard but all works well together.
Dave
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline   Reply With Quote
Old 09-18-2018, 09:16 AM   #32
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Dave, we need to get together. I have lots of questions and I could sure pick your brain since you have done this swap before. PM me your contact info if you don't mind and I'll buy you a beverage.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 09-19-2018, 03:12 PM   #33
68Gold/white
Registered User
 
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,265
Re: 1971 Stepside LS Build

Quote:
Originally Posted by Custom 68 View Post
That is an interesting master cylinder. do you have the info on what it came off of? I am using hydroboost with a standard looking master.
That's a good looking pedal mount as well.
Thanks
Dave
That particular m/cyl is made like that is made that way to clear the hood on a Chevy Astro van. THe hood barely clears the lids on the reservoirs.

There is zero room under the hood on those Astro vans for a vacuum booster, likely reason for hydroboost...
68Gold/white is offline   Reply With Quote
Old 09-22-2018, 03:49 PM   #34
Flubyu
Registered User
 
Join Date: Mar 2017
Location: Clever, Mo
Posts: 69
Re: 1971 Stepside LS Build

Nice to see some local guys on here! I'm just down the road in Clever...and also LS swapping..about 80% done with my 71 5.3 swap.
__________________
'71 C-10 SWB Shop Truck
Currently 350/350, soon to be LS'd.
Flubyu is offline   Reply With Quote
Old 09-25-2018, 11:13 AM   #35
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Quote:
Nice to see some local guys on here! I'm just down the road in Clever...and also LS swapping..about 80% done with my 71 5.3 swap.
Flubyu, you are close! I will need to come and check out your project. Let me know how to get in touch with you.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 09-25-2018, 02:03 PM   #36
FirstGen
Just Don't Stop!
 
FirstGen's Avatar
 
Join Date: Feb 2004
Location: Dallas
Posts: 1,239
Re: 1971 Stepside LS Build

Really like the red frame ����
__________________
1968 C10 build in process
TT LSA/6L90e/9"
FirstGen is offline   Reply With Quote
Old 09-25-2018, 03:04 PM   #37
RedRider
Registered User
 
RedRider's Avatar
 
Join Date: Jan 2016
Location: Poway, CA
Posts: 356
Re: 1971 Stepside LS Build

I’m going with the 278 HP Circle D TC, probably 2600-2800 stall though. What were you thinking?
__________________
1970 C-10 "Old Yeller"
RedRider is offline   Reply With Quote
Old 09-25-2018, 04:06 PM   #38
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Quote:
Really like the red frame ����
Thanks! It will hopefully all come together.

Quote:
I’m going with the 278 HP Circle D TC, probably 2600-2800 stall though. What were you thinking?
I went with the Stage IV BTR cam, so they recommended I do the Circle-D 3000 - 3200 stall for it. It is the 4 bolt converter rather than the stock 4L80 8 bolt configuration so I don't have to change flex plates.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 10-01-2018, 10:44 AM   #39
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Big milestone for the build. Installed the motor and transmission for the final time yesterday. Very happy with the results. The caddy oil pan sits in a much better position than the truck pan.
Fuel system is the next project, then wiring, then cooling, then....

Also got the hydro boost fitted to the firewall. More work to do there, but doing to wait to pull the cab back off to finish up welds etc.
Attached Images
     
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 10-01-2018, 11:22 AM   #40
RedRider
Registered User
 
RedRider's Avatar
 
Join Date: Jan 2016
Location: Poway, CA
Posts: 356
Re: 1971 Stepside LS Build

There's something about that red block/aluminum heads/red valve covers looks that is really sexy.
__________________
1970 C-10 "Old Yeller"
RedRider is offline   Reply With Quote
Old 10-08-2018, 09:31 AM   #41
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

I went back to pick and pull and retrieved the pressure hoses off of the Astro van so I would have the correct ends and bends for the hoses. I had to stuff and old steering column in to make sure I had clearance around that. I picked up a new stock 71 power steering hose...although I don't remember the original using a bend like this.

I now have all the hoses and correct ends to take to the machine shop to have new hoses made. I want to hide these hoses as best as possible and run them down from the booster to the frame and up to the gear box/pump. Otherwise, I made very little progress this weekend.

I spent most of the day on Saturday trying to find an LS crank pulley installer with no luck. The rental tool at O'Reilly's does not work. Going to try Fastenal this week and make my own.
Attached Images
    
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 10-10-2018, 09:25 AM   #42
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Wow! Having hoses made is not cheap. I really wanted the hydroboost to look clean and not have hoses be the first thing you saw when you opened the hood. After trying a few different GM hoses I decided to go ahead and bite the bullet and get some made. I just zip tied them last night for initial fit. Will clamp them down once I can get the low pressure return finished up. These are definitely a smaller overall diameter from the traditional rubber hoses and will clean up the brake/steering area.
Attached Images
    
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 10-10-2018, 11:07 AM   #43
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,930
Re: 1971 Stepside LS Build

Looking good, It is coming along nicely.
Dave
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline   Reply With Quote
Old 10-15-2018, 10:07 AM   #44
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

I drove to Springdale Arkansas yesterday and met Mike (Jens Jimmy). Mike is a fantastic guy with tons of knowledge about our trucks. He has a lot of parts too! He hooked me up with some vent windows, door glass, back window glass, wiper motor, wiper switch and headlight switch. Baby steps, but the pieces are starting to come together.

Now, if I can figure out how to put new seals in these vent windows...time to search the board for help.
Attached Images
 
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."

Last edited by 1971Stepside; 10-15-2018 at 10:16 AM.
1971Stepside is offline   Reply With Quote
Old 10-22-2018, 09:52 AM   #45
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

I was able to get several little items checked off this weekend including redoing this high hump. I was a little rusty on my welding, but it turned out fine for a dynomat base

Always plan to get way more done that what really happens. I think I spend most of my time running to parts stores and hardware stores.
Attached Images
     
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 10-22-2018, 09:52 AM   #46
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

I flipped them twice and they are still sideways...why?
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 10-24-2018, 03:08 PM   #47
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

I continue to mess around with these power steering hoses to try to get them in the right spot and look decent. I'm a little worried they may interfere with the shift linkage, but will have to wait and see. Ended up having to use some small amount of black rubber hose to make it all work. I didn't want to change the low pressure fittings on the pump in case I ever needed to replace it. If the pictures post sideways I'm sorry...had it figured out until I got a new computer.
Attached Images
     
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 10-24-2018, 03:33 PM   #48
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,930
Re: 1971 Stepside LS Build

Wow nice detail. that has fit nice.
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline   Reply With Quote
Old 11-05-2018, 10:09 AM   #49
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Ordered my gas line and fittings so I needed to get the fuel rails and injectors put back on the intake. I wanted to clean the injectors before putting them back in knowing that they will be sitting for a few months before they have clean fuel running to them again. I watched a couple videos on how to do this and then built my own tool. I used a 1/2" piece of rubber hose and reduced it down by using a 1/2" plastic wall anchor. I cut the end off the wall anchor and then drilled it to match the size of the smaller hose. A couple clamps and it worked perfectly with no leaks. I purchased a small 12v battery since I didn't have an old car battery laying around. They were sure dirty. I had a supervisor keeping an eye on me in the shop.
Attached Images
     
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 11-16-2018, 10:15 AM   #50
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1971 Stepside LS Build

Just some more slow progress. Original plan was to run the braided line the full distance, but then I started reading about vapor smell from the lines and decided to put a hard line in. Just mocking up here, but satisfied with the header clearance and the overall fit. Simply bought a 58" inch piece of 3/8" tubing. Virtually a straight run down the frame.
Attached Images
     
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com