w.t.b. rockwell t221 transfer case - The 1947 - Present Chevrolet & GMC Truck Message Board Network

diver · 08-14-2019, 10:24 PM

looking to buy front HUBS DANA 44 6 LUG FOR 1966 K10 TWO/2 PLEASE AND LOCK OUT HUBS ....THANK YOU

franken · 08-16-2019, 11:11 PM

Rumor has it parts for those are getting tough to find. Might think of a swap to a ~71+ trans and TC swap. The 205 is a loved TC.

sweetk30 · 08-17-2019, 11:21 AM

or a divorced 205 from a early dodge or I.H. truck or carryall AKA suburban . this would get you stock look but better parts available .

Short 3/4 · 08-20-2019, 01:15 AM

Quote:

Originally Posted by diver

looking to buy t-221 and mounts for 1966 k-10 in ga.

Can't help with a whole case, but if you just need some parts to fix one, might be worth listing them ( I have a few pieces left over) I've had fairly good luck finding stuff, and parts ship a lot cheaper.
Good luck

Short 3/4 · 08-20-2019, 05:07 PM

Quote:

Originally Posted by Short 3/4

Can't help with a whole case, but if you just need some parts to fix one, might be worth listing them ( I have a few pieces left over) I've had fairly good luck finding stuff, and parts ship a lot cheaper.
Good luck

Oops, see you already found some complete cases near you in the WTB section. This forum is so great! Don't let anybody tell you we can't find anything for our old junk.

Brad54 · 08-20-2019, 10:23 PM

I've got one I won't be needing, out of my '62 K10

**special-K** · 08-22-2019, 07:48 AM

Not everyone wants to take the easy route, then there are those wanting to stay original with their cool bean vintage 4wd. If you want to run a Rockwell that is still possible, though maybe not easy.

My buddy is building a '69 K/20 and is keeping it old school (except the Dana60 up front. He went through the 221, needed some parts so he called. I recently sold off my Rockwell stuff and was no help. I have five 205s laying but he wasn't interested, wanted to stay with the 221. He found what he needed and is moving forward with completing the truck. Don't toss parts or components just because the are obsolete in your eyes. They are good parts that are needed for others

diver · 09-03-2019, 12:53 PM

thank you for your help,i have time to waite on stock parts to be found. i like the k trucks not to many left ,this one was going to crusher and a friend saved it,and now i am bring it back to life..it is striped to frame now 9/3/19 it was a rust bucket,order all new sheet metal,292 in machine shop,looking for stock dana 44 locking hub for k10.2 sets on ebay k20. thanks

Short 3/4 · 09-05-2019, 10:18 PM

Quote:

Originally Posted by special-K

Not everyone wants to take the easy route, then there are those wanting to stay original with their cool bean vintage 4wd. If you want to run a Rockwell that is still possible, though maybe not easy.

My buddy is building a '69 K/20 and is keeping it old school (except the Dana60 up front. He went through the 221, needed some parts so he called. I recently sold off my Rockwell stuff and was no help. I have five 205s laying but he wasn't interested, wanted to stay with the 221. He found what he needed and is moving forward with completing the truck. Don't toss parts or components just because the are obsolete in your eyes. They are good parts that are needed for others

2nd your comment about not tossing parts. One mans junk makes another s project possible.
While I like just about all old trucks, I think the originals are the coolest and worth the effort

08-14-2019, 10:24 PM	#1
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	w.t.b. hub dana 44 6 lug for 66 k10 looking to buy front HUBS DANA 44 6 LUG FOR 1966 K10 TWO/2 PLEASE AND LOCK OUT HUBS ....THANK YOU Last edited by diver; 09-23-2019 at 08:33 PM. Reason: FOUND TRANS CASE

08-16-2019, 11:11 PM	#2
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,052	Re: w.t.b. rockwell t221 transfer case Rumor has it parts for those are getting tough to find. Might think of a swap to a ~71+ trans and TC swap. The 205 is a loved TC.

08-17-2019, 11:21 AM	#3
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: w.t.b. rockwell t221 transfer case or a divorced 205 from a early dodge or I.H. truck or carryall AKA suburban . this would get you stock look but better parts available . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

08-20-2019, 10:23 PM	#6
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	Re: w.t.b. rockwell t221 transfer case I've got one I won't be needing, out of my '62 K10 __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

08-22-2019, 07:48 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: w.t.b. rockwell t221 transfer case Not everyone wants to take the easy route, then there are those wanting to stay original with their cool bean vintage 4wd. If you want to run a Rockwell that is still possible, though maybe not easy. My buddy is building a '69 K/20 and is keeping it old school (except the Dana60 up front. He went through the 221, needed some parts so he called. I recently sold off my Rockwell stuff and was no help. I have five 205s laying but he wasn't interested, wanted to stay with the 221. He found what he needed and is moving forward with completing the truck. Don't toss parts or components just because the are obsolete in your eyes. They are good parts that are needed for others __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-03-2019, 12:53 PM	#8
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: w.t.b. rockwell t221 transfer case thank you for your help,i have time to waite on stock parts to be found. i like the k trucks not to many left ,this one was going to crusher and a friend saved it,and now i am bring it back to life..it is striped to frame now 9/3/19 it was a rust bucket,order all new sheet metal,292 in machine shop,looking for stock dana 44 locking hub for k10.2 sets on ebay k20. thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.