Hi New Member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tdub16 · 09-20-2018, 12:33 PM

Hi all. Been visiting this site for awhile now. Finally able to post something since I found a truck.
71 c10 long bed(yes I wanted a long bed). I will post up pics when I get some new ones, as the only ones I have include the PO's house so I don't want to put his stuff on the web. Has the usual problem with rust, but we will see. Need to do work on the door panels, dash and seat, so I will be asking a lot of question.

First question is it need new outside door handles. Will these work?

https://www.classicparts.com/1967-72...ctinfo/18-113/

THX
Tim

**clay68c10** · 09-20-2018, 12:35 PM

Welcome!
If the door handle push button has fallen in, there is a fix for it. Might save you a couple of bux. Worth a search.

Tdub16 · 09-20-2018, 06:01 PM

Here's SPID

**dmjlambert** · 09-20-2018, 08:08 PM

Welcome aboard! We look forward to pictures and questions. Those do look like the correct door handles.

Lokin4AReason · 09-21-2018, 01:29 PM

greeting(s) to the board ...

Tdub16 · 09-22-2018, 01:44 AM

Is there any way to tell what the original transmission the truck came with from the spid?

**Already Gone** · 09-22-2018, 02:20 AM

Quote:

Originally Posted by Tdub16

Is there any way to tell what the original transmission the truck came with from the spid?

Welcome to the boards and you have chosen to be part of the best website on the Internet.. Seeing there is nothing called out on the spid it would have come with a 3 speed manual column shift affectionately known as 3OTT for 3 On The Tree..

09-20-2018, 12:33 PM	#1
Tdub16 Registered User Join Date: Sep 2018 Location: Brownwood, TX Posts: 18	Hi New Member Hi all. Been visiting this site for awhile now. Finally able to post something since I found a truck. 71 c10 long bed(yes I wanted a long bed). I will post up pics when I get some new ones, as the only ones I have include the PO's house so I don't want to put his stuff on the web. Has the usual problem with rust, but we will see. Need to do work on the door panels, dash and seat, so I will be asking a lot of question. First question is it need new outside door handles. Will these work? https://www.classicparts.com/1967-72...ctinfo/18-113/ THX Tim

09-20-2018, 12:35 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,883	Re: Hi New Member Welcome! If the door handle push button has fallen in, there is a fix for it. Might save you a couple of bux. Worth a search. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

09-20-2018, 06:01 PM	#3
Tdub16 Registered User Join Date: Sep 2018 Location: Brownwood, TX Posts: 18	Re: Hi New Member Here's SPID Attached Images

09-20-2018, 08:08 PM	#4
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,561	Re: Hi New Member Welcome aboard! We look forward to pictures and questions. Those do look like the correct door handles.

09-21-2018, 01:29 PM	#5
Lokin4AReason Registered User Join Date: Oct 2014 Location: a beer can .. Posts: 924	Re: Hi New Member greeting(s) to the board ... __________________ dont want to hear excuses, i want to hear solution(s)

09-22-2018, 01:44 AM	#6
Tdub16 Registered User Join Date: Sep 2018 Location: Brownwood, TX Posts: 18	Re: Hi New Member Is there any way to tell what the original transmission the truck came with from the spid?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.