Rear end needed in phoenix - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hjalbert · 01-16-2004, 06:48 PM

Hey all, I need a rear end for my 72 jimmy here in phoenix. Need either 308 or 373 gears. thanks for the help

jbw0127 · 01-17-2004, 02:20 AM

I have a 3.73 rearend that I need to get rid of. It's out of my 72 SWB and is a 12 bolt non-posi trailing arm rearend. I'm not familar with Jimmy's and whether or not they have trailing arms or leafs. Never the less, I need to get rid of this.

**67sss** · 01-17-2004, 02:15 PM

Does it look like this? what's the measurement from perch to perch?

walker · 01-20-2004, 02:04 AM

Did you ever find your rear end???

hjalbert · 01-20-2004, 10:13 PM

no i havent found one yet, this is the first time ive been on the board since i posted the post, thanks for the replys, but i am looking for something in phoenix, and the jimmy is a four wheel drive, and is leaf, thanks HJAlbert

*cranknut67* · 01-21-2004, 04:04 AM

try VanBuren .....

(inside joke)

Hotrodhenryj · 01-21-2004, 12:40 PM

Not sure if you need 1/2 or 3/4 ton but here is one I have close by.
http://67-72chevytrucks.com/vboard/s...056#post689056

01-16-2004, 06:48 PM	#1
hjalbert cracker Join Date: Sep 2001 Location: Wilmington, NC Posts: 1,021	Rear end needed in phoenix Hey all, I need a rear end for my 72 jimmy here in phoenix. Need either 308 or 373 gears. thanks for the help __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Harry John Albert III located in Phoenix, AZ 1972 GMC JIMMY, 1969 lwb Chevy Frame, 1999 bmw k1200 ltc 1992 Kawasaki concours 1991 bmw k75 1973 cortez motorhome

01-17-2004, 02:20 AM	#2
jbw0127 Registered User Join Date: Nov 2003 Location: Sacramento, CA Posts: 73	I have a 3.73 rearend that I need to get rid of. It's out of my 72 SWB and is a 12 bolt non-posi trailing arm rearend. I'm not familar with Jimmy's and whether or not they have trailing arms or leafs. Never the less, I need to get rid of this. __________________ 72 swb Cheyenne "nut & bolt" frame off (in process) Blown 383

01-17-2004, 02:15 PM	#3
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	rearend Does it look like this? what's the measurement from perch to perch? Attached Images

01-20-2004, 02:04 AM	#4
walker Registered User Join Date: Jul 2003 Location: north of Phx AZ about 30 miles Posts: 698	Did you ever find your rear end??? __________________ Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold

01-20-2004, 10:13 PM	#5
hjalbert cracker Join Date: Sep 2001 Location: Wilmington, NC Posts: 1,021	rear end no i havent found one yet, this is the first time ive been on the board since i posted the post, thanks for the replys, but i am looking for something in phoenix, and the jimmy is a four wheel drive, and is leaf, thanks HJAlbert __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Harry John Albert III located in Phoenix, AZ 1972 GMC JIMMY, 1969 lwb Chevy Frame, 1999 bmw k1200 ltc 1992 Kawasaki concours 1991 bmw k75 1973 cortez motorhome

01-21-2004, 04:04 AM	#6
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	try VanBuren ..... (inside joke)

01-21-2004, 12:40 PM	#7
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Not sure if you need 1/2 or 3/4 ton but here is one I have close by. http://67-72chevytrucks.com/vboard/s...056#post689056 __________________ Arizona rust free sheetmetal



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.