I got some more stuff in!! - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72superBB · 12-04-2003, 02:00 PM

No problem Randy. Just let me know when you have a chance.

Hope you get to feeling better.

What are direction to your place. I know how to get to the golf course. I will be up there over Christmas Day and tha day after.

thanks

Ron

landon4421 · 12-04-2003, 02:36 PM

Ola Randy, I am a dork ! I have asked you about a heater core a few times ! I don't remember ever getting an answer

I know you are busy, and I probally missed your relpy. Anyway I was sitting here thinking I had not heard from you ! Anyway I was looking for a heater core for a non a/c 1972 chevy truck. Used one will be fine if it is still good. Sorry for bugging you ! Landon

teeitup · 12-04-2003, 02:54 PM

Hi Landon, used are not good, You can get them pretty reasonable at part stores, They are a pain to put in, if I were you I'd put in a new one so you don't have to do it again for along time. Good luck Thanks Randy

landon4421 · 12-04-2003, 03:16 PM

Thanks for the info Randy !

A friend of mine is trying to be cheap and find a used one ! I was just trying to help him out. I will try and get him convenced to buy a new one ! :p Have a good one ! Landon

jordanj · 01-15-2004, 05:29 PM

Randy, do you have a power steering gear box for my 72 c10 ?

jordanj · 01-15-2004, 05:29 PM

Randy, do you have a power steering gear box for my 72 c10 ?

teeitup · 01-15-2004, 07:28 PM

I got some left but I need to check them out and make sure they are good $35 plus shipping. Thanks Randy

olblue60@aol.com · 01-15-2004, 07:29 PM

Hey Randy
First,thanks for the Steering box.
Heres what I thought I saw in the pics

White A/C outlet (are they a good pair?)
Behind the dash center A/C outlet duct (2 into 1)
Blue seatbelts
Blue armrest
68 upper alternator bracket

Thanks
John

teeitup · 01-15-2004, 07:35 PM

Thanks John, this is an old thread but I may have some of the stuff
White AC vents are cracked but I have other colors $10
center duct, I may have one $5
I got some other blue seat belts in $35
not sure on blus armrests
Alt bracket $10
Thanks Randy

olblue60@aol.com · 01-15-2004, 07:53 PM

Thanks for the reply Randy. All the prices are good. let me know what you have and send me a total with shipping and I'll get a payment out to you.

John

teeitup · 01-15-2004, 08:06 PM

John, it will be tomorrow or Sat before I can get out there, Thanks Randy

MrGoodpliers · 01-16-2004, 09:12 PM

Did I see a box of trim clips? How much for a full set for '69 short fleet, upper & lower? All push-in & bolt on, no tape type. Thanks

teeitup · 01-16-2004, 09:22 PM

Sorry sold all those already, thanks Randy

teeitup · 01-17-2004, 05:30 PM

John, here is what I have, do you want me to get you a shipping price? I need your zip if so. Thanks Randy

olblue60@aol.com · 01-18-2004, 10:59 AM

Hey Randy
Everything looks great! I was wondering if you might also have a good working A/C clutch fan for a small block 4x4? I also thought I would see if you had come up with a 68 upper grille opening tray yet? Thanks! Heres my shipping address.

John Murray
10411 Edgewood Ave.
Silver Spring Md. 20901

olblue60@aol.com · 01-18-2004, 11:02 AM

P.S.
I could also use one more Center male belt if you have one for my suburban. Thanks
John

Blue Beard · 01-18-2004, 02:56 PM

Sure hope you can keep everything organized....................looks like a huge quantity..........hope you made a good deal..........

teeitup · 01-18-2004, 11:29 PM

John, I'll get you a shipping price Monday evening, I just got back from Tulsa.
Blue Beard, most of this is sold, its an old thread, but what I got left is pretty organized.
Thanks Randy

*Don Loverink* · 01-19-2004, 12:52 AM

whats the story on the 72 4+4 shortbox frame for a grand? does it have a title.

teeitup · 01-19-2004, 01:33 AM

Yes it has a title Don, no vin, no body though. Eric looked at it a bit when he was here. Its been sanded and painted. Let me know, Thanks Randy

*cranknut67* · 01-19-2004, 04:09 AM

PARTS WHORE

chevykevy · 01-21-2004, 01:04 AM

Looking for a few things. Looking for the vacuum fitting with the one outlet which mounts on the manifold to supply vacuum to a TH 4oo transmission. Also, do you know if the throttle rod changed in dimension( longer from the 90 degree bend to the carburetor mount) from the 67-68 to 69-70 models. If so, I need the longer to clear a kickdown bracket. zip 82190

Thanks

Kevin
68 project CST

teeitup · 01-21-2004, 04:16 AM

I'll look Wed evening

hvychvy · 01-21-2004, 01:33 PM

I need the following if you still have any for 67 1/2 ton 4x4
1.Taillight trim 2.heater control non a/c 3.flywheel cover for TH350
4.a halfway decent blue or black dashpad 5.8/400 emblems 6.a speedo gear from a np205 That is all I can think of now but if you have any shoot me some prices Thanks Josh

chevykevy · 01-21-2004, 11:54 PM

One more note on the throttle rod. The one I'm looking for also has a ridge( welded washer type stop) on the section between the bend and the carburetor in order to stop the rod when it meets bell-crank.

Thanks
Kevin

12-04-2003, 02:00 PM	#126
72superBB Registered User Join Date: Nov 2003 Location: Mandan, ND Posts: 422	No problem Randy. Just let me know when you have a chance. Hope you get to feeling better. What are direction to your place. I know how to get to the golf course. I will be up there over Christmas Day and tha day after. thanks Ron __________________ Life is full of choices and a Chevy is the best choice. 1990 Chevy SWB

12-04-2003, 02:36 PM	#127
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Ola Randy, I am a dork ! I have asked you about a heater core a few times ! I don't remember ever getting an answer I know you are busy, and I probally missed your relpy. Anyway I was sitting here thinking I had not heard from you ! Anyway I was looking for a heater core for a non a/c 1972 chevy truck. Used one will be fine if it is still good. Sorry for bugging you ! Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

12-04-2003, 02:54 PM	#128
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Hi Landon, used are not good, You can get them pretty reasonable at part stores, They are a pain to put in, if I were you I'd put in a new one so you don't have to do it again for along time. Good luck Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-04-2003, 03:16 PM	#129
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Thanks for the info Randy ! A friend of mine is trying to be cheap and find a used one ! I was just trying to help him out. I will try and get him convenced to buy a new one ! :p Have a good one ! Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

01-15-2004, 07:28 PM	#132
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I got some left but I need to check them out and make sure they are good $35 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-15-2004, 05:29 PM	#130
jordanj Registered User Join Date: Oct 2003 Location: Carrboro, N.C. Posts: 24	Randy, do you have a power steering gear box for my 72 c10 ?

01-15-2004, 05:29 PM	#131
jordanj Registered User Join Date: Oct 2003 Location: Carrboro, N.C. Posts: 24	Randy, do you have a power steering gear box for my 72 c10 ?

01-15-2004, 07:29 PM	#133
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	stuff Hey Randy First,thanks for the Steering box. Heres what I thought I saw in the pics White A/C outlet (are they a good pair?) Behind the dash center A/C outlet duct (2 into 1) Blue seatbelts Blue armrest 68 upper alternator bracket Thanks John

01-15-2004, 07:35 PM	#134
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Thanks John, this is an old thread but I may have some of the stuff White AC vents are cracked but I have other colors $10 center duct, I may have one $5 I got some other blue seat belts in $35 not sure on blus armrests Alt bracket $10 Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-15-2004, 07:53 PM	#135
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	stuff Thanks for the reply Randy. All the prices are good. let me know what you have and send me a total with shipping and I'll get a payment out to you. John

01-15-2004, 08:06 PM	#136
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	John, it will be tomorrow or Sat before I can get out there, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-16-2004, 09:12 PM	#137
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Clips Did I see a box of trim clips? How much for a full set for '69 short fleet, upper & lower? All push-in & bolt on, no tape type. Thanks __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

01-16-2004, 09:22 PM	#138
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Sorry sold all those already, thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-17-2004, 05:30 PM	#139
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	John, here is what I have, do you want me to get you a shipping price? I need your zip if so. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2004, 10:59 AM	#140
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Stuff Hey Randy Everything looks great! I was wondering if you might also have a good working A/C clutch fan for a small block 4x4? I also thought I would see if you had come up with a 68 upper grille opening tray yet? Thanks! Heres my shipping address. John Murray 10411 Edgewood Ave. Silver Spring Md. 20901



Register or Log In To remove these advertisements.

01-18-2004, 11:02 AM	#141
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Stuff P.S. I could also use one more Center male belt if you have one for my suburban. Thanks John

01-18-2004, 02:56 PM	#142
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Sure hope you can keep everything organized....................looks like a huge quantity..........hope you made a good deal.......... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-18-2004, 11:29 PM	#143
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	John, I'll get you a shipping price Monday evening, I just got back from Tulsa. Blue Beard, most of this is sold, its an old thread, but what I got left is pretty organized. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-19-2004, 12:52 AM	#144
Don Loverink Account Suspended Join Date: Dec 2003 Location: Brainerd, Minnesota Posts: 1,063	whats the story on the 72 4+4 shortbox frame for a grand? does it have a title.

01-19-2004, 01:33 AM	#145
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Yes it has a title Don, no vin, no body though. Eric looked at it a bit when he was here. Its been sanded and painted. Let me know, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-19-2004, 04:09 AM	#146
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	I've got two words fer ya' PARTS WHORE

01-21-2004, 01:04 AM	#147
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	Looking for a few things. Looking for the vacuum fitting with the one outlet which mounts on the manifold to supply vacuum to a TH 4oo transmission. Also, do you know if the throttle rod changed in dimension( longer from the 90 degree bend to the carburetor mount) from the 67-68 to 69-70 models. If so, I need the longer to clear a kickdown bracket. zip 82190 Thanks Kevin 68 project CST

01-21-2004, 04:16 AM	#148
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I'll look Wed evening __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-21-2004, 01:33 PM	#149
hvychvy Registered User Join Date: Jan 2004 Location: Virginia Posts: 47	I need the following if you still have any for 67 1/2 ton 4x4 1.Taillight trim 2.heater control non a/c 3.flywheel cover for TH350 4.a halfway decent blue or black dashpad 5.8/400 emblems 6.a speedo gear from a np205 That is all I can think of now but if you have any shoot me some prices Thanks Josh __________________ 1969 C10 350,3 speed on floor 1997 Dodge Ram lifted !967 K10 400,TH350,4" lift,shortbed(girlfriend's truck my envy)

01-21-2004, 11:54 PM	#150
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	throttle rod One more note on the throttle rod. The one I'm looking for also has a ridge( welded washer type stop) on the section between the bend and the carburetor in order to stop the rod when it meets bell-crank. Thanks Kevin

Register or Log In To remove these advertisements.