|
12-31-2008, 09:50 PM
|
#1 |
|
Registered User
Join Date: Sep 2007
Location: san diego,ca
Posts: 125
|
brake bleed question
I just switched the rear to discs. Can I just bleed the back ones, or do I have to do the front ones also?
|
|
|
|
12-31-2008, 11:37 PM
|
#2 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: brake bleed question
Did you swap MC's also.I ask because your brake system needs to be "balanced".The rear disc may require more or less fluid to operate properly.You may also need a new proportioning valve.If you have the right MC and did not loosen or remove any of the front brake lines you may get by without bleeding the fronts.But since you're already there.....
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
01-01-2009, 09:12 AM
|
#3 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: brake bleed question
yes you need a disc/disc master and proportioning valve i think new size for brake lines for proper operation of 4whell discs
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
