62 T700 install query - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1G1YY · 10-17-2020, 11:08 PM

Could someone please let me know the distance between the top of the T700 trans and the low hump trans cover?
I need to work out floor shifter mounting.
Thanks

61K10 · 10-18-2020, 01:43 PM

what is a t700? same as a us 700r post a pic

1G1YY · 10-18-2020, 07:20 PM

Yes, it is a T700R4 removed from a C4 Vette.

**MT65** · 10-23-2020, 09:37 PM

I don’t think that dimension will be established until your transmission xmember is in and pinion angle established, lot of variables between motor mounts and transmission mounts to pick that out before they are established.....

1G1YY · 10-24-2020, 02:26 AM

I have the driveline all set with eng and trans mounts done incl pinion angle.
The cab is still off the chassis and I was looking at preparing mounts for the shifter.
Probably best I wait until cab is mounted..thank you for your interest.

**The Rocknrod** · 10-24-2020, 05:03 AM

I would.
I set up a 200R4 with a low hump, no problems.

1G1YY · 10-24-2020, 10:07 PM

Thanks for your input. Gratifying to know you had no shifter install clearance issues.
Just saw your build...looks first class.
Your attention to detail sure seems to be paying off....very nice.

10-17-2020, 11:08 PM	#1
1G1YY Registered User Join Date: Dec 2016 Location: South Australia Posts: 40	62 T700 install query Could someone please let me know the distance between the top of the T700 trans and the low hump trans cover? I need to work out floor shifter mounting. Thanks

10-18-2020, 01:43 PM	#2
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: 62 T700 install query what is a t700? same as a us 700r post a pic __________________ 1961 chevy K10 my build is------------61K10 build

10-18-2020, 07:20 PM	#3
1G1YY Registered User Join Date: Dec 2016 Location: South Australia Posts: 40	Re: 62 T700 install query Yes, it is a T700R4 removed from a C4 Vette.

10-23-2020, 09:37 PM	#4
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 437	Re: 62 T700 install query I don’t think that dimension will be established until your transmission xmember is in and pinion angle established, lot of variables between motor mounts and transmission mounts to pick that out before they are established.....

10-24-2020, 02:26 AM	#5
1G1YY Registered User Join Date: Dec 2016 Location: South Australia Posts: 40	Re: 62 T700 install query I have the driveline all set with eng and trans mounts done incl pinion angle. The cab is still off the chassis and I was looking at preparing mounts for the shifter. Probably best I wait until cab is mounted..thank you for your interest.

10-24-2020, 05:03 AM	#6
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 62 T700 install query I would. I set up a 200R4 with a low hump, no problems. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-24-2020, 10:07 PM	#7
1G1YY Registered User Join Date: Dec 2016 Location: South Australia Posts: 40	Re: 62 T700 install query Thanks for your input. Gratifying to know you had no shifter install clearance issues. Just saw your build...looks first class. Your attention to detail sure seems to be paying off....very nice.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.