Reproduction High Hump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mikecc6 · 10-18-2020, 01:07 PM

I need a high hump cover and firewall piece for 64 c10. The new reproduction pieces show they fit 1960-1962.

Will they fit 1964? They look like they will but I don’t want to buy something that won’t fit.

Thanks

AcampoDave · 10-19-2020, 08:04 PM

Don't know which one you are looking at but Slosh Tubz says they fit 60-66
https://www.sloshtubz.net/store/1960...nels-p78791513

Mikecc6 · 10-19-2020, 08:09 PM

I did look at the Slosh Tubz piece and it does show 60-66.

I was really looking at steel pieces - Key Parts - and they show 60-62. I thought they were the same but don’t want to spend $300 and find out they don’t fit.

AcampoDave · 10-19-2020, 08:31 PM

Maybe you can give them a call. I'm not aware of any changes on the high hump thru the years except the way the gas pedal mounts. 60-62 used bolts and 63-66 had ball studs threaded in the holes but I still dont think that made the threaded mounting bosses any different.

**nsb29** · 10-20-2020, 06:53 AM

I used an original 60 in my 65

**bigmoe** · 10-20-2020, 04:39 PM

I have a high hump someone gave me but are they two piece? because it doesn't go all the way forward.

Mikecc6 · 10-20-2020, 05:32 PM

There are two pieces. Firewall piece and cover

**The Rocknrod** · 10-30-2020, 03:04 PM

It's weird I havnt seen these for 64-66, I wonder why?
http://autobodyspecialt.com/chevy-pi...for-high-hump/
http://autobodyspecialt.com/1960-196...ll-4wd-models/
http://autobodyspecialt.com/1960-196...ll-4wd-models/

Ennehazrad · 10-30-2020, 04:47 PM

Have you checked LMC? Their high hump firewall piece says it fits 60-66 and costs $90. It’s at the bottom of the page- check it out...

https://www.lmctruck.com/1960-66-che...-filler-panels

https://www.lmctruck.com/1960-66-che...over-high-hump
Posted via Mobile Device

**PGSigns** · 10-31-2020, 08:46 PM

The one key parts sells should fit the 63 to 66. I sold them both pieces a couple of years ago that I had here for my 65. The plan was to clean them up and laser scan the parts to develop the new parts. The difference I think is the 60 to 62 the hump was bolt in and the later ones were spot welded. I would not hesitate to buy the key parts pieces.
Jimmy

Mikecc6 · 11-01-2020, 11:10 AM

Jimmy

Thank you. That’s the information I was looking for. Mike

10-18-2020, 01:07 PM	#1
Mikecc6 Registered User Join Date: Feb 2014 Location: Westminster MD Posts: 73	Reproduction High Hump I need a high hump cover and firewall piece for 64 c10. The new reproduction pieces show they fit 1960-1962. Will they fit 1964? They look like they will but I don’t want to buy something that won’t fit. Thanks

10-19-2020, 08:04 PM	#2
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,726	Re: Reproduction High Hump Don't know which one you are looking at but Slosh Tubz says they fit 60-66 https://www.sloshtubz.net/store/1960...nels-p78791513

10-19-2020, 08:09 PM	#3
Mikecc6 Registered User Join Date: Feb 2014 Location: Westminster MD Posts: 73	Re: Reproduction High Hump I did look at the Slosh Tubz piece and it does show 60-66. I was really looking at steel pieces - Key Parts - and they show 60-62. I thought they were the same but don’t want to spend $300 and find out they don’t fit.

10-19-2020, 08:31 PM	#4
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,726	Re: Reproduction High Hump Maybe you can give them a call. I'm not aware of any changes on the high hump thru the years except the way the gas pedal mounts. 60-62 used bolts and 63-66 had ball studs threaded in the holes but I still dont think that made the threaded mounting bosses any different.

10-20-2020, 06:53 AM	#5
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Reproduction High Hump I used an original 60 in my 65 __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent

10-20-2020, 04:39 PM	#6
bigmoe Senior Member Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 952	Re: Reproduction High Hump I have a high hump someone gave me but are they two piece? because it doesn't go all the way forward.

10-20-2020, 05:32 PM	#7
Mikecc6 Registered User Join Date: Feb 2014 Location: Westminster MD Posts: 73	Re: Reproduction High Hump There are two pieces. Firewall piece and cover

10-30-2020, 03:04 PM	#8
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Reproduction High Hump It's weird I havnt seen these for 64-66, I wonder why? http://autobodyspecialt.com/chevy-pi...for-high-hump/ http://autobodyspecialt.com/1960-196...ll-4wd-models/ http://autobodyspecialt.com/1960-196...ll-4wd-models/ __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-30-2020, 04:47 PM	#9
Ennehazrad Registered User Join Date: Apr 2015 Location: Riverside, California Posts: 70	Re: Reproduction High Hump Have you checked LMC? Their high hump firewall piece says it fits 60-66 and costs $90. It’s at the bottom of the page- check it out... https://www.lmctruck.com/1960-66-che...-filler-panels https://www.lmctruck.com/1960-66-che...over-high-hump Posted via Mobile Device

10-31-2020, 08:46 PM	#10
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Reproduction High Hump The one key parts sells should fit the 63 to 66. I sold them both pieces a couple of years ago that I had here for my 65. The plan was to clean them up and laser scan the parts to develop the new parts. The difference I think is the 60 to 62 the hump was bolt in and the later ones were spot welded. I would not hesitate to buy the key parts pieces. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

11-01-2020, 11:10 AM	#11
Mikecc6 Registered User Join Date: Feb 2014 Location: Westminster MD Posts: 73	Re: Reproduction High Hump Jimmy Thank you. That’s the information I was looking for. Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.