The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-20-2020, 10:11 AM   #1
bcoke
Registered User
 
Join Date: Sep 2017
Location: Austin, TX
Posts: 31
K30 / K5 Frankenstein: braking problem

My braking is super touchy right now because the back drums are braking way before the front discs. Turns out I have a master cylinder, proportioning valve, and front lines for a K5, but the axles have been swapped out (owner before me) to 1 tons, which I’m guessing are from a K30.

So looks like I need to go find an MC, prop valve, and line dimensions off a K30 to match the bigger axels, right? Anyone have any advice? Or done this before and been through challenges they can share?

Any help is appreciated!
bcoke is offline   Reply With Quote
Old 05-20-2020, 10:24 AM   #2
AZBuckHunter
Registered User
 
AZBuckHunter's Avatar
 
Join Date: Mar 2020
Location: Lakeside, AZ
Posts: 45
Re: K30 / K5 Frankenstein: braking problem

You may just have a bad prop valve or air in the system. When I put tons on my K5 I didn't have to do anything but it was built into a crawler and not driven on the road much. An adjustable prop valve would probably be what I would do if I was going to be driving on the street.
AZBuckHunter is offline   Reply With Quote
Old 05-20-2020, 10:36 AM   #3
bcoke
Registered User
 
Join Date: Sep 2017
Location: Austin, TX
Posts: 31
Re: K30 / K5 Frankenstein: braking problem

Yeah that’s what this one is built into (457s in the front and rear and fully rhino lined haha). Great on the trail but hell on the street, and I’ve been trying to make it more of a driver lately.

That’s a good idea, I can start there and keep doing trial and error. Any in particular that you’d recommend?
bcoke is offline   Reply With Quote
Old 05-20-2020, 10:49 AM   #4
AZBuckHunter
Registered User
 
AZBuckHunter's Avatar
 
Join Date: Mar 2020
Location: Lakeside, AZ
Posts: 45
Re: K30 / K5 Frankenstein: braking problem

I would get the best you can afford.
You got a pic of your rig on here?
AZBuckHunter is offline   Reply With Quote
Old 05-20-2020, 12:04 PM   #5
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,495
Re: K30 / K5 Frankenstein: braking problem

You could plumb one of these into the rear line. Put it close to the master.

https://www.summitracing.com/parts/w...hoCyywQAvD_BwE
geezer#99 is online now   Reply With Quote
Old 05-20-2020, 12:11 PM   #6
71blksuper4x4
SWB 4x4 Collector
 
71blksuper4x4's Avatar
 
Join Date: Jun 2001
Location: Osage City, KS
Posts: 5,148
Re: K30 / K5 Frankenstein: braking problem

Could always run hyrdroboost.
__________________
TREVOR
1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks)
1972 Jimmy (soon to be Hickey cloned)
1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track)
1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank
1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT)
http://67-72chevytrucks.com/vboard/s...d.php?t=624819
1989 V3500 Crew Cab (454tbi, NV4500, np205)
1970 Chevelle SS (LS5 454,th400,8track,buckets,tach)
:2004 Jeep Wrangler Rubicon (daily driver)

WTB: 1968-70 Cruise Control Lever
71blksuper4x4 is offline   Reply With Quote
Old 05-20-2020, 01:28 PM   #7
57taskforce
All about them K’s
 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: Farmington, New Mexico
Posts: 6,170
Re: K30 / K5 Frankenstein: braking problem

Quote:
Originally Posted by 71blksuper4x4 View Post
Could always run hyrdroboost.
I agree. That and the hydraulic clutch are the two best things I’ve done to my K20. It’s really not hard to do.
__________________
Tyler
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘87 IROC-Z all original 50K mile survivor TPI 305 IROC Blue
‘10 Camaro 2SS/RS Aqua Blue Metallic #93 -version 2.0
57taskforce is offline   Reply With Quote
Old 05-20-2020, 04:33 PM   #8
WyoRoadDog
Page intentionally left blank.
 
WyoRoadDog's Avatar
 
Join Date: Jul 2006
Location: Laramie, WY
Posts: 299
Re: K30 / K5 Frankenstein: braking problem

My guess, and only because I’ve been researching as part of a swap I did, is you have the wrong proportioning valve ( and maybe MC). Was it originally a four wheel drum vehicle? Disc drum needs a different PV from that, and MC should have a front chamber (disc) that’s larger than the rear (drum).
__________________
There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams

'67 GMC 4x4, 305 V6! Or all the parts for anyway...
'17 Subaru Outback.
'18 Toyota Tacoma TRD Off Road.
'99 Ducati 900SS.
WyoRoadDog is offline   Reply With Quote
Reply

Bookmarks

Tags
blazer, brake conversion problem, brake fluid capacity, brake help, k30

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com