Papa's 67 step side (aka ANOTHER porterbuilt prison) - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chapster · 09-20-2012, 04:54 PM

Keep up the great work, it is looking great. I know it gets frustrating finding out the hard way with figment issues with little info or warning (I have had way to many of those myself), but it will be worth it in the end.

I'll be following along?
Posted via Mobile Device

VA72C10 · 09-20-2012, 05:22 PM

Good looking build! Nice progress so far!
Posted via Mobile Device

**67cheby** · 09-20-2012, 05:45 PM

looking great !!

shawno72 · 09-20-2012, 05:58 PM

Really nice job.

smartass12 · 09-21-2012, 08:55 AM

Quote:

Originally Posted by Jimbabwe

Looking good. Did you narrow your rear?

I grabbed a rear end from a 01 Chevy blazer. it already had disk brakes and its a 8.5 with 30 spline axles. 54" wms to wms which is what i need to lay frame on the step side.

smartass12 · 09-21-2012, 08:57 AM

Quote:

Originally Posted by darkgable79

Nice wheels. What size? Look like 22s.

The fronts are 20x8.5 and the rears are 22x10

smartass12 · 09-21-2012, 09:00 AM

CORRECTION to my post #65....PB (not PD) hood hinges.. Nate is to good to let that mistake go..sorry nate..

Thanks again guys for the complements on the build.

Jimbabwe · 09-21-2012, 10:55 AM

Quote:

Originally Posted by smartass12

I grabbed a rear end from a 01 Chevy blazer. it already had disk brakes and its a 8.5 with 30 spline axles. 54" wms to wms which is what i need to lay frame on the step side.

Yep, I narrowed my '69 12 bolt to 54" as well after speaking to RustSpot about his. I still have to cut the bedsides.

Greg924 · 09-21-2012, 01:00 PM

My '68 has the same story. Grandpa bought it new off the lot in 68 and it's been passed down the family to me.

smartass12 · 09-23-2012, 09:19 AM

Quote:

Originally Posted by Jimbabwe

Yep, I narrowed my '69 12 bolt to 54" as well after speaking to RustSpot about his. I still have to cut the bedsides.

Are you raising your entire bed, how much?

smartass12 · 09-23-2012, 09:20 AM

Quote:

Originally Posted by Greg924

My '68 has the same story. Grandpa bought it new off the lot in 68 and it's been passed down the family to me.

The great thing about it is it will be one project to keep...I always end up selling them to fund another....

Jimbabwe · 09-23-2012, 09:53 AM

Quote:

Originally Posted by smartass12

Are you raising your entire bed, how much?

I'm undecided between raising the bed, or leaving it at the stock height with just a notch cover--either something clean, or something funky like old boards and a big rusty hasp that looks like a toolbox.
I have the extreme rear drop--the higher notch, so after laying out and giving an inch or so of clearance, that's a pretty tall raising. Haven't measured that yet.

jtp67-72 · 09-23-2012, 11:11 AM

Quote:

Originally Posted by Jimbabwe

I'm undecided between raising the bed, or leaving it at the stock height with just a notch cover--either something clean, or something funky like old boards and a big rusty hasp that looks like a toolbox.
I have the extreme rear drop--the higher notch, so after laying out and giving an inch or so of clearance, that's a pretty tall raising. Haven't measured that yet.

10" raise............jim

smartass12 · 09-24-2012, 09:05 AM

Quote:

Originally Posted by jtp67-72

10" raise............jim

That will actually help me with finding places to mount the air management and battery.

smartass12 · 09-24-2012, 09:09 AM

So i tried my hand at some body work this weekend..filled in the old fuel hole as well as filled some old mirror holes. im happy this the results for my first time..guess its time to tackle the firewall.

smartass12 · 10-03-2012, 09:05 AM

I think i bit off more than i can chew this crease on the door.

**68 Four on the Floor** · 10-04-2012, 06:22 PM

Looks like the door could be handful for anyone. Got the same problem with one of mine

smartass12 · 10-05-2012, 06:57 AM

Quote:

Originally Posted by 68 Four on the Floor

Looks like the door could be handful for anyone. Got the same problem with one of mine

I kept popping back in (like it had memory) but i finally got to enough to where any skim coat will make as smooth as a babies butt.

Hopefully i have enough time this weekend to get the bed back on to start the mods on it.

jc70chevy · 10-05-2012, 08:14 PM

nice build very impressing

smartass12 · 10-06-2012, 10:20 AM

Quote:

Originally Posted by jc70chevy

nice build very impressing

Thank you, kinda slow going but just so limited on time and funds..

jc70chevy · 10-07-2012, 01:38 PM

i completely under stand the funds AND TIME

stepside83 · 10-07-2012, 06:08 PM

Quote:

Originally Posted by smartass12

I kept popping back in (like it had memory) but i finally got to enough to where any skim coat will make as smooth as a babies butt.

Hopefully i have enough time this weekend to get the bed back on to start the mods on it.

one way to get it to stop poping back like a pop can, is heat it up, then put a cold wet rag on the area itll shrink the metal, and cause it to stop poping in and out, sometimes this works, sometimes the metal is to stretched and it wont, just my .2 cents from working in body shops

NewType72 · 10-07-2012, 11:37 PM

I second the heating my sand blaster guy warped my hood and I guess it was really bad when we got it back (never got to see that) and my father used a propane torch and heated her up until it was semi decent. Still wobbles quite a bit but I got another solid hood so I'll be using that one just be careful with the heat it could also make it worse

smartass12 · 10-08-2012, 07:50 AM

Thanks for the info guy..I finally got it but i have a huge dent in the drivers side rear fender that im sure ill have to try heat on.

**paul mora** · 10-29-2012, 09:56 PM

I have a couple of fenders if you are interested in let me know. I was going to to hold on to them but they take up a lot of space and I need to buy a radiator
Posted via Mobile Device

09-20-2012, 04:54 PM	#76
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) Keep up the great work, it is looking great. I know it gets frustrating finding out the hard way with figment issues with little info or warning (I have had way to many of those myself), but it will be worth it in the end. I'll be following along? Posted via Mobile Device __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

09-20-2012, 05:22 PM	#77
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) Good looking build! Nice progress so far! Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-20-2012, 05:45 PM	#78
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) looking great !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-20-2012, 05:58 PM	#79
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) Really nice job. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

09-21-2012, 09:00 AM	#82
smartass12 Registered User Join Date: Jan 2012 Location: orange county, california Posts: 363	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) CORRECTION to my post #65....PB (not PD) hood hinges.. Nate is to good to let that mistake go..sorry nate.. Thanks again guys for the complements on the build. __________________ My 67 stepside build http://67-72chevytrucks.com/vboard/s...d.php?t=522760

09-21-2012, 01:00 PM	#84
Greg924 Registered User Join Date: Jul 2012 Location: Redmond, Wa Posts: 8	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) My '68 has the same story. Grandpa bought it new off the lot in 68 and it's been passed down the family to me.

09-24-2012, 09:09 AM	#90
smartass12 Registered User Join Date: Jan 2012 Location: orange county, california Posts: 363	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) So i tried my hand at some body work this weekend..filled in the old fuel hole as well as filled some old mirror holes. im happy this the results for my first time..guess its time to tackle the firewall. __________________ My 67 stepside build http://67-72chevytrucks.com/vboard/s...d.php?t=522760 Last edited by smartass12; 01-01-2013 at 12:33 PM.

10-03-2012, 09:05 AM	#91
smartass12 Registered User Join Date: Jan 2012 Location: orange county, california Posts: 363	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) I think i bit off more than i can chew this crease on the door. __________________ My 67 stepside build http://67-72chevytrucks.com/vboard/s...d.php?t=522760 Last edited by smartass12; 01-01-2013 at 12:34 PM.

10-04-2012, 06:22 PM	#92
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) Looks like the door could be handful for anyone. Got the same problem with one of mine

10-05-2012, 08:14 PM	#94
jc70chevy Registered User Join Date: Jul 2012 Location: vallejo,ca Posts: 176	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) nice build very impressing

10-07-2012, 01:38 PM	#96
jc70chevy Registered User Join Date: Jul 2012 Location: vallejo,ca Posts: 176	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) i completely under stand the funds AND TIME

10-07-2012, 11:37 PM	#98
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) I second the heating my sand blaster guy warped my hood and I guess it was really bad when we got it back (never got to see that) and my father used a propane torch and heated her up until it was semi decent. Still wobbles quite a bit but I got another solid hood so I'll be using that one just be careful with the heat it could also make it worse __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

10-08-2012, 07:50 AM	#99
smartass12 Registered User Join Date: Jan 2012 Location: orange county, california Posts: 363	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) Thanks for the info guy..I finally got it but i have a huge dent in the drivers side rear fender that im sure ill have to try heat on. __________________ My 67 stepside build http://67-72chevytrucks.com/vboard/s...d.php?t=522760

10-29-2012, 09:56 PM	#100
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 975	Re: Papa's 67 step side (aka ANOTHER porterbuilt prison) I have a couple of fenders if you are interested in let me know. I was going to to hold on to them but they take up a lot of space and I need to buy a radiator Posted via Mobile Device __________________ Pulatoy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.