The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-22-2007, 05:41 PM   #1
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Mom's '54 project build thread

Here's a bit of history of my mom's '54 Chevy truck in relation to my '54. When I bought my '54, I had no idea that my mom was so fond of it. Sure, she told me she liked it and even taught me how to drive (I was 16 at the time) with the manual trans. I also didn't know she liked the long bed. Even more, I didn't know she'd ever buy one for herself and want to restore it. So when she bought a short bed '54 and asked me what I did with my long bed chassis I about choked. I had cut it in half to make a trailor. So the search was on for an Advance Design longbed chassis. As of now we may have found one in the Sacremento area. I traded her bed sides, so no worries there. I also traded her my grill for her's as I wanted a chrome one and my original didn't lend itself to that. She'll be using the carbed 305 from my '84 Camaro and a 700R4 trans with a 10 bolt rear. She's going to be going for a different look than I am planning on, but it should be a clean driver for her. Well here's a few pics of her "rough" start. My brother will be doing most of the work ( BTW, no start date set as of yet) and I'll be docummenting it for her as she's not "comfortable" with forums. Enjoy!

__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe

Last edited by Daniel U; 02-22-2007 at 09:07 PM.
Daniel U is offline   Reply With Quote
Old 02-22-2007, 06:57 PM   #2
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: Mom's '54 project build thread

So its all in the family huh? That's really cool

Last edited by Kabwe; 02-22-2007 at 06:58 PM.
Kabwe is offline   Reply With Quote
Old 02-22-2007, 08:39 PM   #3
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,312
Re: Mom's '54 project build thread

Wow, I wish my Mom was into classic trucks. That's really COOL!!
CAL 58 GMC is offline   Reply With Quote
Old 02-22-2007, 08:52 PM   #4
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

Quote:
Originally Posted by Kabwe View Post
So its all in the family huh? That's really cool
Yeah, this shot was at my brother's place the day I traded her bed sides and grill. My brother's got a few projects himself. I guess he'll be going to get the chassis this weekend.
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe

Last edited by Daniel U; 02-22-2007 at 09:14 PM.
Daniel U is offline   Reply With Quote
Old 02-22-2007, 09:21 PM   #5
Igotachevyor2
Apache Club
 
Igotachevyor2's Avatar
 
Join Date: Jan 2006
Location: Goodlettsville,Tn.
Posts: 1,294
Re: Mom's '54 project build thread

cool
__________________
58 CHEVY APACHE I 74 CHEVY C-10 I 78 K-10 donor truck I 89 SONOMA
My Trucks Apache Sitting Idle MySpace
Project Dad's Truck (74 C-10 to K-10 conversion)
Igotachevyor2 is offline   Reply With Quote
Old 02-24-2007, 11:49 PM   #6
BUXMAN66
go bucks!
 
Join Date: Jan 2002
Location: MIAMISBURG OHIO USA
Posts: 803
Re: Mom's '54 project build thread

that's pretty cool ! keep us posted to the progress!!
__________________
'68 swb 1/2t 350/350th
'86 lngbd 3/4 TON parts getter
'49 gmc 1/2 t 5 window 350/350th
'96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?
BUXMAN66 is offline   Reply With Quote
Old 02-25-2007, 09:28 AM   #7
Jebb1978
Senior Member
 
Jebb1978's Avatar
 
Join Date: Aug 2005
Location: Mesa,Az
Posts: 3,713
Re: Mom's '54 project build thread



Cool story, I will watch for progress.
__________________
1959 GMC project
Jebb1978 is offline   Reply With Quote
Old 02-25-2007, 11:20 AM   #8
Hart_Rod
*************

 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,437
Re: Mom's '54 project build thread

That's awesome, Daniel. My dad passed the "old car bug" to me and I hope to pass it on to my children.
Hart_Rod is offline   Reply With Quote
Old 02-28-2007, 05:13 PM   #9
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

UPDATE:The longbed chassis for mom's '54 is being sand blasted this week. Pics to fallow....
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe
Daniel U is offline   Reply With Quote
Old 02-28-2007, 08:20 PM   #10
52streetrod
Registered User
 
52streetrod's Avatar
 
Join Date: Dec 2006
Location: Ft. Lewis
Posts: 38
Re: Mom's '54 project build thread

cool... cant wait to see the build
52streetrod is offline   Reply With Quote
Old 03-02-2007, 12:10 PM   #11
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

Quote:
Originally Posted by Hart_Rod View Post
That's awesome, Daniel. My dad passed the "old car bug" to me and I hope to pass it on to my children.
My dad did the same for me and my brother when we restored his original owner '68 Plymouth Road Runner. I've always been a Chevrolet guy though? Anyways, I hope to pass it on to my son.
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe

Last edited by Daniel U; 03-07-2007 at 01:35 PM.
Daniel U is offline   Reply With Quote
Old 03-03-2007, 03:48 PM   #12
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

My brother/father ordered the Must.II front end yesterday for my mom's '54! Pics ASAP.
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe
Daniel U is offline   Reply With Quote
Old 03-03-2007, 07:27 PM   #13
84 400
Sb 400 club
 
84 400's Avatar
 
Join Date: Nov 2005
Location: NH / MA
Posts: 2,670
Re: Mom's '54 project build thread

wow nice progress. So is it going for a long bed street llok?? sounds really neat!
__________________
1984 chevy c10, built 400sb,.(SOLD)
77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363
2000 Tahoe LS(dads)
1956 Willys Wagon (327 chevy) Project (Now Buick 225) t90,dana 18 twin stick,dana 25 front, dana53 rear 588's.....
1976 CASE 210(Project)
84 400 is offline   Reply With Quote
Old 03-04-2007, 09:48 PM   #14
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

My mom likes the look and stance of the 3/4 ton longbed, so there will be plenty of room for wheel travel, lol. It will have an updated feel to it without the solid front axle, and stop better with 4 wheel disc. She just wants a clean driver. She's selling her Caddillac when it's finished.
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe
Daniel U is offline   Reply With Quote
Old 03-05-2007, 02:40 AM   #15
84 400
Sb 400 club
 
84 400's Avatar
 
Join Date: Nov 2005
Location: NH / MA
Posts: 2,670
Re: Mom's '54 project build thread

WOw good luck and it sounds like a meanningful project
__________________
1984 chevy c10, built 400sb,.(SOLD)
77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363
2000 Tahoe LS(dads)
1956 Willys Wagon (327 chevy) Project (Now Buick 225) t90,dana 18 twin stick,dana 25 front, dana53 rear 588's.....
1976 CASE 210(Project)
84 400 is offline   Reply With Quote
Old 03-19-2007, 09:07 PM   #16
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

My brother stopped by my place today with my mom's '54 sitting on the longbed chassis she wants. He installs the Must. II front this weekend. Here's a few pics:
Front end:






and this is the most rust damage inside(Pass. side floor pan) After reviewing the pictures, it looks like there will be a bunch of bondo and rust to remove.
Enjoy! Daniel U
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe

Last edited by Daniel U; 03-20-2007 at 01:52 AM.
Daniel U is offline   Reply With Quote
Old 03-20-2007, 11:58 AM   #17
solidaxel
Registered User
 
solidaxel's Avatar
 
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,736
Re: Mom's '54 project build thread

I could sure use some measurments from your cab firewall to the front of the frame horns, and a second one from the bottom of the firewall, at the toe board at the frame to the front of the frame horns.
I am trying to place the engine mounts on the frame without the cab in place, and yours is where mine would be if I had the cab removed from my running truck!
Attached Images
  
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD)
53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25
55 GMC 1st Black Mll ZZ4 TKO 600 5 sp 3:73
62 Solidaxle Corvette Roman Red 327
340hp 4spd 3:36
65 Corvette Coupe 327 350hp 4spd 4:11
78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42
2000 S-Type 3.0 (wifes cruiser)
2003 GMC SCSB 5.3 4L60E 3:42
solidaxel is offline   Reply With Quote
Old 03-20-2007, 03:43 PM   #18
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

I'll measure on Sunday when the welding is finished. They put the cab on for a second measurement. I'll get back to you then.
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe
Daniel U is offline   Reply With Quote
Old 03-21-2007, 12:48 AM   #19
solidaxel
Registered User
 
solidaxel's Avatar
 
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,736
Re: Mom's '54 project build thread

Thank You, when ever you get around to it !!
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD)
53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25
55 GMC 1st Black Mll ZZ4 TKO 600 5 sp 3:73
62 Solidaxle Corvette Roman Red 327
340hp 4spd 3:36
65 Corvette Coupe 327 350hp 4spd 4:11
78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42
2000 S-Type 3.0 (wifes cruiser)
2003 GMC SCSB 5.3 4L60E 3:42
solidaxel is offline   Reply With Quote
Old 03-24-2007, 02:11 PM   #20
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

A few teaser pics until it's all welded in:

Long bed box

Factory(ish) running hieght

9 bolt Borg Warner 3.27 rear w/posi & disc.

Front end shot
I'll get those measurements as soon as it's welded in all the way. Right now it's just tacked up for mock up. It should roll out Sun. night on 4 wheels
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe
Daniel U is offline   Reply With Quote
Old 04-03-2007, 01:40 AM   #21
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

Quote:
Originally Posted by Kabwe View Post
So its all in the family huh? That's really cool
My brother just got a 50 GMC truck last week. He'll be joinng the site soon.
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe
Daniel U is offline   Reply With Quote
Old 04-03-2007, 08:09 AM   #22
Hart_Rod
*************

 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,437
Re: Mom's '54 project build thread

Quote:
Originally Posted by Daniel U View Post
A few teaser pics until it's all welded in:


9 bolt Borg Warner 3.27 rear w/posi & disc.
That's the rearend I have in my 48. It works great, although new gears are a little pricey.
Hart_Rod is offline   Reply With Quote
Old 04-03-2007, 12:30 PM   #23
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

Yeah, the 9 bolt rears were built in Australia. She(mom) is fine with the gear ratio of 3.27, so the inside wont be messed with too much. They seem to be in good shape. The brakes will need lots of work, but we new that. Not bad for $200.00 though. GM said the 9 bolt rears were supposed to handle up to 300 hp. The H.O. 305 she's going to be using out of my '84 Z/28 wont ever make that much hp. Though it will be a big step up from the factory inline 6.
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe
Daniel U is offline   Reply With Quote
Old 04-03-2007, 12:35 PM   #24
Sweet&LowPro55
Registered User
 
Sweet&LowPro55's Avatar
 
Join Date: Dec 2006
Location: Holland Michigan
Posts: 125
Re: Mom's '54 project build thread

..Thats a great story !! keep up the good work & keep us posted...
__________________
http://i142.photobucket.com/albums/r...MyExtremeD.jpg
~ '55 Chevy Pro-Street P.U. Powered by 396c.i. ~
~ '01 ChevyS10 Extreme LS Ext. cab
~ '92 Camaro RS 25TH.Limited Edition Aniv.Convert.
~ '98 Dodge Ram Van 5.7 Litre
~ '98 E-Z-GO Golf Car ..Tony Stewart Edition
!! '69 Camaro SS..SOLD .. Still crying !!
Sweet&LowPro55 is offline   Reply With Quote
Old 04-07-2007, 11:25 PM   #25
Daniel U
Registered User
 
Daniel U's Avatar
 
Join Date: Oct 2006
Location: Central Coast, CA.
Posts: 1,199
Re: Mom's '54 project build thread

Here's some pics of what's been done to the front and rear as of yet. Anyone following my build thread will recognize the long bed sides.lol The rear 3/4 ton trucks had leaf springs that mounted on the oustide of the frame rails. The new 1/2 ton kit mounts inside. She likes the look and stance of the 3/4 ton, but wants it to ride more comfortably. And this will be a daily driver for her. Also, it's sitting on 14" GM factory rally wheels from my dad's '70 El Camino. We're trying to talk here into a 16" wheel with wide white walls.

side shot



A view from above without the hood and motor.

bed from the rear

bed from front
__________________
Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up
build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674
My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up
build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost
1960 (400/T350/?) Apache 10 short/fleet side-big window
1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4
2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB
Doing my part to warm the globe

Last edited by Daniel U; 04-07-2007 at 11:29 PM.
Daniel U is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:02 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com