Re: CPP Drop Spindle Special
 

2.5" drop spindles for 87 shipped to 75201

Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

Hey Justin, just wondering what a set of 5" rear drop springs for 71 c10 would run me shipped to 58501? Thanks

Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

PM me a price for 2 1/2 drop and springs if you have them for a 71 C 10

Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

Drop spindles for a 69? Has disc brakes up front. May be 71 spindles. Sent to 36092
Posted via Mobile Device

Re: CPP Drop Spindle Special
 

Interested in a price for the new style drop spindles that dont increase trac width for a 72 as well as 2" drop front springs, and 6" drop rear springs if possible. Shipping is to 27616

Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

Could you pm me a price on a set of the new style drop spindles for a 72 shipped to 35630?

Re: CPP Drop Spindle Special
 

I was informed by a member this morning that on e-bay you get these dropped spindals for $225.00 and free shipping.

I am sorry we cannot sell them at this price and give free shipping

Justin

What can you sell them for?
Posted via Mobile Device

Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

Can you price a Grand Slam Kit 4/5 drop w/upgraded drilled & slotted rotors & red calipers for a 70 c10 stepside shipped to 38852?

Thanks

Re: CPP Drop Spindle Special
 

pm sent

Re: CPP Drop Spindle Special
 

How about camaro parts? 70 a arms black

Re: CPP Drop Spindle Special
 

Can you PM me a price on CPP drop spindles for a 85 GMC C1500 to 72761?


Thank you

Re: CPP Drop Spindle Special
 

Interested in Trac Bar (6572DTBK) and Shock Relocation (6372SRK) shipped to 77868. Thanks, Neil

Re: CPP Drop Spindle Special
 

You selling 6 lug rotors too? Ship to 87121

Re: CPP Drop Spindle Special
 

Not sure if this was ever put to bed, (didn't read the entire thread again), but I just stumbled on this article which appears to show the amount of change in track width from a stock 72 disc brake truck with typical drop spindles to swapping those with the modular's.

Drop Spindle install

Re: CPP Drop Spindle Special
 

This topic should be very easy to answer,... but no one seems to know.
There are 4 different track widths
1) Stock drum brake spindle
2) 71-87 factory disc brake spindle width
3) "standard" style 2.5" and 3" drop spindles
4) CPP Modular spindles

All would be measured from wheel mounting surface on the same truck, or on a fabricated fixture.
No bags.
No different springs.
Same set up used for all measurements.
That would put all the rumors to rest.

Re: CPP Drop Spindle Special
 

price for 72 c-10
4/6 drop
modular spindles
shock relocator/ rear
trac bar
drilled/slotted rotors&calipers
shipped to 74764

Re: CPP Drop Spindle Special
 

This would be easy enough if one had each of the spindles on hand. Have a stable fixture for the ball joint holes and a framing square to measure wms. Just a matter of rounding up the spindles; maybe a vendor could do this?

Re: CPP Drop Spindle Special
 

I 100% agree with you.

You would need:
1) 63-70 stock drum brake assembled spindle.
2) 71-72 stock disc brake assembly
(and maybe the 73-87 version to rule out any differences)
3) 63-70, 71-72, or 73-87 conventional DROP spindle
4) 63-70, 71-72, or 73-87 MODULAR drop spindle from CPP.
(both drop spindles would need to be measured with the same rotor installed)

Any vendors have the ability to do this?