The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   My 1970 GMC “Project Splice” (https://67-72chevytrucks.com/vboard/showthread.php?t=751569)

TA_C10 07-19-2020 07:43 PM

Re: My 1970 GMC Project
 
Yeah man, I had to slice n dice mine too. The replacements aren't perfect but they are close enough. Be glad your not rebuilding them from scratch!

Kronald_70GMC 07-19-2020 07:48 PM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by TA_C10 (Post 8778404)
Yeah man, I had to slice n dice mine too. The replacements aren't perfect but they are close enough. Be glad your not rebuilding them from scratch!

That is very true!

Kronald_70GMC 07-23-2020 10:57 PM

Re: My 1970 GMC Project
 
3 Attachment(s)
Well thats a relief. I have managed to get my rocker fitting quite well without having to slice and dice it. Bottom door gap is nice and even now. The cab corner on the other hand, now that I had to slice and dice. Still alot of work to do on the cab corner but I'm feeling good about it now.:metal:

TA_C10 07-23-2020 11:53 PM

Re: My 1970 GMC Project
 
That looks nice and straight. Good work.

Kronald_70GMC 07-23-2020 11:55 PM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by TA_C10 (Post 8780848)
That looks nice and straight. Good work.

Well thank ya sir

Scurry67 07-23-2020 11:57 PM

Re: My 1970 GMC Project
 
looks great. i would say the rockers/cab corners patches were the biggest pain for me. you seem to have it well under control:clap:

Kronald_70GMC 07-24-2020 02:00 PM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by Scurry67 (Post 8780850)
looks great. i would say the rockers/cab corners patches were the biggest pain for me. you seem to have it well under control:clap:

Thats good to hear that it looks under control. Im just kinda winging it and hoping for the best.:lol: Thanks for the compliments. Your feather fill is looking spot on.

Kronald_70GMC 07-24-2020 09:28 PM

Re: My 1970 GMC Project
 
1 Attachment(s)
Hey guys. Im looking for a little bit of input on something here. Ive managed to get my cab corner mocked up to an extent but im not sure that it is correct in the curve if that makes any sense. I think that it may dive inward of the body lines to soon. What are your guys thoughts on this?

chewychevy67 07-25-2020 12:10 AM

Re: My 1970 GMC Project
 
Why don't you go look at my cab and take a cardboard template of the curve. That would help you. A body moulding could help too.

Kronald_70GMC 07-25-2020 12:24 AM

Re: My 1970 GMC Project
 
2 Attachment(s)
Quote:

Originally Posted by chewychevy67 (Post 8781359)
Why don't you go look at my cab and take a cardboard template of the curve. That would help you. A body moulding could help too.

I ended up making one from my old cab and I took off the piece of moulding. My suspicions were confirmed and I had to make some relief cuts to make the adjustment. I now have it all tacked back together and fitting pretty nice.

CryingJoker 07-25-2020 09:18 AM

Re: My 1970 GMC Project
 
Man i hope to have the same patience with my rust repair on my 70 I'm currently starting as you seem to have. Good work keep it up.

Kronald_70GMC 07-25-2020 11:15 AM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by CryingJoker (Post 8781466)
Man i hope to have the same patience with my rust repair on my 70 I'm currently starting as you seem to have. Good work keep it up.

Thanks!

May70 07-25-2020 11:54 AM

Re: My 1970 GMC Project
 
Can you post some pics of the rocker panel with the door open? You are exactly a few steps ahead of me and I am really wondering how the @$#@ this is gonna go together!

Also how does the outer rocker top edge compare to the inner rocker height wise? Ill PM you some pics as not to hi-jack your thread (hah). Thanks man you are doing awesome work.

Kronald_70GMC 08-06-2020 12:27 PM

Re: My 1970 GMC Project
 
5 Attachment(s)
I have been working at getting the cab corner welded back together which is alot of fun.:lol: Every tack I make wants to shrink it back down so I need to put it farther out than where it should sit so that once it shrinks, it is in the correct spot. It is turning out quite nice but is very slow going. You can see just how far off it is towards the bottom of the cab corner. Good thing I noticed this or it would have been far too much filler to correct it in body work stages.

Kronald_70GMC 08-07-2020 12:21 AM

Re: My 1970 GMC Project
 
4 Attachment(s)
I'd say the cab corner is about 90% to the correct shape now. With a little bit of luck, I might just be able to get it all finish fit and installed this weekend.

Kronald_70GMC 08-07-2020 12:25 AM

Re: My 1970 GMC Project
 
Has anyone else noticed that the view counter appears to have stopped quite some time ago or is it just something on my end?

chewychevy67 08-07-2020 08:28 PM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by Kronald_70GMC (Post 8788206)
Has anyone else noticed that the view counter appears to have stopped quite some time ago or is it just something on my end?

Nope it don't work. Been a few months now.

mr48chev 08-07-2020 09:11 PM

Re: My 1970 GMC Project
 
Wow, I don't think I would have ever taken one on in that shape. I've primarily got to weld up the 50 something holes that my uncle drilled in the 71 I have that he had for years. I think my dad gave him that electric drill for his Birthday one year too. You sure are doing a nice job on it though.

Kronald_70GMC 08-07-2020 11:58 PM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by mr48chev (Post 8788586)
Wow, I don't think I would have ever taken one on in that shape. I've primarily got to weld up the 50 something holes that my uncle drilled in the 71 I have that he had for years. I think my dad gave him that electric drill for his Birthday one year too. You sure are doing a nice job on it though.

Thanks for the compliments. I just keep telling myself that all this work will pay off in the end.

Kronald_70GMC 08-09-2020 02:17 AM

Re: My 1970 GMC Project
 
3 Attachment(s)
Cab corner has nearly been finish welded. I had to cut it back off in order it weld all the bottom stuff. For some reason my welder is trash at welding from underneath.:waah: Its all good though as I had to remove it for weld through primer and to finish cutting the back to fit. It turned out to be alot easier than expected to remove the lip around the bottom of the cab corner. Im hoping to possibly get it tacked into position tomorrow. We'll see if I have enough time.

Kronald_70GMC 08-09-2020 06:50 PM

Re: My 1970 GMC Project
 
3 Attachment(s)
All welded up. Just need to check for pinholes in the welds, clean up the back side, shoot with weld through and it will be ready for the final install!:metal:

Kronald_70GMC 08-09-2020 11:25 PM

Re: My 1970 GMC Project
 
I'm hoping that someone who has installed vintage air might be able to chime in on this. Im still trying to figure out how I can mount the unit as clean as possible but I can't afford the unit as of yet. I would like to have the fasteners hidden from the engine bay to stick with my clean firewall theme. So my question is, if I were to weld in two vertical channels on the inner firewall that were just wider that the overall unit, would I then be able to build a mounting plate that I could bolt to the unit, and then to the channels? Im fairly sure that it would work, my only concern is that I would be then mounting the unit, Im guessing around 3/4" further into the cab. Does anyone know if this would work? Thanks in advance for any help on this.

cornerstone 08-10-2020 01:03 AM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by Kronald_70GMC (Post 8789544)
I'm hoping that someone who has installed vintage air might be able to chime in on this. Im still trying to figure out how I can mount the unit as clean as possible but I can't afford the unit as of yet. I would like to have the fasteners hidden from the engine bay to stick with my clean firewall theme. So my question is, if I were to weld in two vertical channels on the inner firewall that were just wider that the overall unit, would I then be able to build a mounting plate that I could bolt to the unit, and then to the channels? Im fairly sure that it would work, my only concern is that I would be then mounting the unit, Im guessing around 3/4" further into the cab. Does anyone know if this would work? Thanks in advance for any help on this.

I can't give a direct answer, but I'll be glad to try to help you figure it out. I want the same look, I mean we went through the work of getting the wall clean and it just feels wrong to have to have the head of a bolt mess it up. Currently I have the VA unit hanging on the the inside firewall. It's not bolted in yet, but held in place by the aluminum lines that attach to the unit. My thought was to get the evaporator in it's proper place, and make marks on the firewall where threaded mounting studs could be welded. It is a very tight fit just to get it up there, and will be even harder to get enough clearance to fit the unit on the studs, but where there is a will there is a way. I'll try to get some decent pics up so we can solve the problem. ;)

Kronald_70GMC 08-10-2020 08:55 AM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by cornerstone (Post 8789590)
I can't give a direct answer, but I'll be glad to try to help you figure it out. I want the same look, I mean we went through the work of getting the wall clean and it just feels wrong to have to have the head of a bolt mess it up. Currently I have the VA unit hanging on the the inside firewall. It's not bolted in yet, but held in place by the aluminum lines that attach to the unit. My thought was to get the evaporator in it's proper place, and make marks on the firewall where threaded mounting studs could be welded. It is a very tight fit just to get it up there, and will be even harder to get enough clearance to fit the unit on the studs, but where there is a will there is a way. I'll try to get some decent pics up so we can solve the problem. ;)

Thank you sir!

curtisb 08-10-2020 03:59 PM

Re: My 1970 GMC Project
 
beautiful work, thanks for the pictures. this will help me when i start my restoration

Kronald_70GMC 08-10-2020 05:02 PM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by curtisb (Post 8789858)
beautiful work, thanks for the pictures. this will help me when i start my restoration

Right on. Glad I can help out in any way. Lots of what I've done was found on this forum.

Kronald_70GMC 08-14-2020 01:20 AM

Re: My 1970 GMC Project
 
5 Attachment(s)
Nothing ever seems to work out in what I think i can get done in an evening. There is always something unforseen that slows me down. Tonight It was my rear floor patch. It looked like it was pretty close from the bottom which is where I've been viewing it from. I should have looked from inside the cab as well but of course, I didn't.:lol: Oh well its all fixed up now. I had to slice it along the top edge and twist the top out towards the back of the cab to get it to where it needed to be to work with cab corner. After all that fun, I even managed to get it tacked into position. :metal:

TA_C10 08-17-2020 01:52 PM

Re: My 1970 GMC Project
 
very nice work sir.

gmc684x4 08-18-2020 02:15 PM

Re: My 1970 GMC Project
 
Very nice looking truck

What are you using for a mig ?

I had a mig pak 10 from Ct i hated it and sold it even a welder i know had a hard time with it

Kronald_70GMC 08-18-2020 04:16 PM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by TA_C10 (Post 8793815)
very nice work sir.

Thank you sir.

Quote:

Originally Posted by gmc684x4 (Post 8794348)
Very nice looking truck

What are you using for a mig ?

I had a mig pak 10 from Ct i hated it and sold it even a welder i know had a hard time with it

Thanks for the positive input! Always a huge help for getting my motivation up.
My mig is an old Hobart Handler probably from the 80's. My dad has a hobart Handler 140 and it is a great machine. Thats what I started welding with back when I lived at home.

Kronald_70GMC 08-21-2020 09:25 PM

Re: My 1970 GMC Project
 
2 Attachment(s)
Well I did manage to get on the truck for about 30 minutes today. I have been sidetracked on a different project for my quad. It turned out so much better than I expected so I just have to share it here. I did managed to correct the rear door gap. It was quite tight near the body line and for anyone who has the same issue, it seems that correcting it with the cab corner tacked on seems to be the best way. I had tried to correct it several times pre cab corner and it always went back. I guess it just needed something to hold it in place.

TA_C10 08-21-2020 11:06 PM

Re: My 1970 GMC Project
 
Great idea axe holder on the quad ��

And doing a great job on the cab corner.

.

Kronald_70GMC 08-22-2020 10:03 AM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by TA_C10 (Post 8796058)
Great idea axe holder on the quad ��

And doing a great job on the cab corner.

.

Thanks man! I'm hoping to get out there later today to make some more progress.

Kronald_70GMC 08-22-2020 10:08 PM

Re: My 1970 GMC Project
 
2 Attachment(s)
Wooo weee is that alot of welding. I got 2 hours in tonight and have the rest of the plug welds done and I also finished up the butt weld on the outboard side. It is all ground down and cleaned up. So shiny :lol:

Kronald_70GMC 08-27-2020 08:19 PM

Re: My 1970 GMC Project
 
1 Attachment(s)
Cab corner is in! :metal: It fought me pretty good on the back so it will definitely need some decent filler but im pretty happy all things considered.

cornerstone 08-28-2020 12:32 AM

Re: My 1970 GMC Project
 
You're a true craftsman Kyle! :metal: It may take long time to do it right, but you'll know exactly what you're driving and have pride in it at the same time.:gmc2:

Kronald_70GMC 08-28-2020 12:02 PM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by cornerstone (Post 8799111)
You're a true craftsman Kyle! :metal: It may take long time to do it right, but you'll know exactly what you're driving and have pride in it at the same time.:gmc2:

You sure know how to make a guy feel good about his work. Thanks! It's comments like this that keep me motivated.

TA_C10 08-28-2020 12:05 PM

Re: My 1970 GMC Project
 
Agreed. Such great work here. That corner looks really nice. :metal:

.

Kronald_70GMC 08-28-2020 06:10 PM

Re: My 1970 GMC Project
 
Quote:

Originally Posted by TA_C10 (Post 8799281)
Agreed. Such great work here. That corner looks really nice. :metal:

.

Thanks man! I appreciate the kind words

gmc684x4 08-29-2020 02:37 AM

Re: My 1970 GMC Project
 
Nice work

I have seen cardboard as backer for bondo on rusty trucks seen a bronco where the fellow rivited the patch panels over the rust spots

My aim will be after i get a mig to make my work look close to yours
Practice will help

I seen a trick one fellow showed me make the patch and the panel trimmed close to same size tack the two together use zip disk cut at a 45 degree angle back tack the fresh cut flush make the next cut and continue until you have the patch completely flush fit finish welding and watch how much heat you drive into the panel


All times are GMT -4. The time now is 08:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com