Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

OH COME ON DAVE! ya tease!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Ready!!!!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

This money's burning a hole in my pocket Dave......give us the details!! :metal:

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

agreed!

Im ready right this very minute! lol

Everyday I come into work and open this site up to see if maybe today is the day I get to spend some money!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

X2 ^^^ what he said.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Ok everyone March is finally here so lets get this started.

Standard Tank=$349.00 Rollover Vent and 0-90 ohm sender included with FREE SHIPPING to 48 states. You save $104.00

EFI Tank = $ 553.00 Including Rollover Vent and 0-90 ohm sender FREE SHIPPING to 48 states. You save $199.00

There is only 20 openings for this group buy so DON'T WAIT it will go very fast.

The website is updated with the group buy pricing so you may order there here is a link http://www.boydwelding.com/category/...ts/67-72-truck. or call the shop to place an order.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

cool cool.
Ok i have followed this from the beginning and even looked back some and at your website which by the way is great looking.
Just to confirm a couple things. I swapped to a plastic blazer tank with an external pump a few years ago and well dont like it much. this is for a EFI (ls1 setup). I cut the smaller spare tire cross member out and this fits pretty good but is ugly. I assume this will just fit right in its place. I want to confirm but I currently have a side filler since it is on the tank I have. Your photos show this to be a a 90 degree out of the tank can this be rotated up slightly? My tank has a smaller filler neck and is slow to fill.
I am concerned my external pump might go out as it did on my way back from Mobile on the Power Tour. I dont like the external pump as well as the internal one.
Can you elaborate on the baffles some more?
I know most of this may be in this post but it is 15 pages I looked thru part of it again and didnt see all this.
Again thanks
Dave

Oh yea I want to put my name in for one of the slots.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

These tanks fit without any major modifications to the stock frame so with your spare tire cross member removed it will fit without any issues. we can point the filler neck whichever way you need to fit your truck. you will need to supply a diagram detailing the pitch and position. The baffles in an EFI tank are the same as the standard tank except This year we revised the complete EFI Basket and added a 3rd baffle to help keep fuel at the pump.

If you would like to place an order for the tank give me a call or go to the website and we can get it going for you.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

just purchased thanks dave for doing the group buy

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Thanks Dave just ordered mine. I am looking forward to installing it.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

another quick question on the EFI pump. I have heard an ocassional problem with the Walbro pumps, I guess no body has had any issues with these? Also would there be a reason to upgrade or I assume these will support the 500 hp range. Im not there but am thinking of FI at some point and didnt want to skimp on the pump. Like I said before the big reason for me to look here is to get an intank pump these seem to be better as the are cooled by the fuel.
Just looking for any other thoughts on this. But since this is limited I better make a move quick. lol
Again thanks
Dave

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave,

I have an efi but want to keep my external pump, do these have or can I request it to have return line provision added? also I will need -6 connections on return and output.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave,
I just ordered my std tank with side filler. Thanks for the group buy.

I need a 240-33 ohm sender instead of the 0-90. Can that be done?

If not can you delete the 0-90 sender and possibly credit me for the $39????

Do u have any idea on turnaround on these. Rough guess is OK.

My order # is 6HF180898R451924E

Thanks, Mel

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I have read on other forums that people have experienced issues with the walbro pumps but I am confident that with the qty of walbro pumps sold vs the quantity that have issues still make them a reliable pump. i have some customers running them in 500+ hp applications. all of our pumps are in-tank.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

All tanks standard or EFI have return bungs already there for use.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Mel,

we have 240-33 senders that we can add to your order no problem. Our production times right now are 7-10 business days.

I am glad you brought up the question about if you do not need the sender or roll over vent if there would be a credit because i have had that question a few times already this morning.
There will not be any credits or discounts given if you leave off the sender or rollover since the tanks have not been up-charged to cover those expenses that is how we can offer a "True Free Shipping" and offer the ROV and Sender without any extra cost. When we do a Group Buy I personally cover the expenses of the sender and ROV and we sacrifice almost all profits through production to offer the "Best Price Anywhere".
I really enjoy this forum and these Group Buy's are my way of saying Thank You!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Just ordered my tank Dave.

Thank you for doing this group buy and thanks for the great price! Can't wait to get the tank!

Jay

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Thanks for the quick response Dave.

The other question I have for you is: Is the side fill 2" or 1-1/2". I would like to have my tank with a 1-1/2" side fill. I am going to be using a fuel filler mounted on the wheel well or stake pocket and the ones I have been able to find all are 1-1/2".

I sent this question to you also on your web site but thought I would repeat it here also in case anyone else has the same issue.

Thanks,
Mel

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

The side fills are standard 2" pipe. I can update your tank to a 1.5" side filler. I didn't see any comments on your order so i am glad you asked.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

ahhhhhhhhhhh finally the money is gone! lol

Thanks Dave cant wait for the tank!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

tank is ordered cant wait

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Just placed my order also. Thanks for the great group buy deal. I will be anxiously awaiting it's arrival.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Order placed. Thanks for having a group buy. This is a great deal.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

9 spots left!!!!!!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

How many usable gallons are these efi tanks? Thanks for the group buy also.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Order placed. Thanks for the group buy!

Steve

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

i want to secure a spot on the fuel tank group buy and will fax you the dimensions for a quote shortly after this post! thanks
johnny williams

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

approx 19 gallons

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Shoot me a price for a complete bolt in kit for a 1972 C10. Sending unit and all.....

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

pm sent

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Quick question Dave, will each of us receive a tracking number once our tank ship?

Thanks

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Count me in for a tank as well. I'll check your dimensions and order my tank shortly.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Yes, as long as there is an email address on file.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I better jump on this!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Hey Morf, buy me one too!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Finally got all my details worked out and ordered mine, thank you very much.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave, I removed my spare tire cross member and am thinking about ordering a slightly larger size to get more capacity. If I go larger what would you charge on top of the group buy price?

Thanks,
Shawn

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

i may have missed the this, but does the group buy price include a build to spec tank also. if it does i am in for a efi version. thanks daniel.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Will this tank work with a Porterbuilt rear drop member? If so put me in line.