Re: Project NOT4SLE
 

Not much has been going on lately but I have installed one new part in the last month. :lol:
Between working, and the new year and our expansion I have had no time to do anything! and I am dying to get my suspension on and installed to make a better handling and driving truck.

I have been driving around with only a peep mirror for well, since I got the truck running. I finally got a mirror ( well my girl bought me one) for my truck.

Came from Summit, white box mirror, and great quality. Possibly a billet specialties unit! $44 bucks shipped to the door

http://i25.photobucket.com/albums/c6...2/IMG_0879.jpg

http://i25.photobucket.com/albums/c6...2/IMG_0880.jpg

http://i25.photobucket.com/albums/c6...2/IMG_0881.jpg

Re: Project NOT4SLE
 

Nice...keeping the Ford in the rearview :lol:

Re: Project NOT4SLE
 

That my friend is a sweet mirror and you have officially done more in the last month now than I have! :lol:

Re: Project NOT4SLE
 

Decided to get down to actually working on the truck yesterday. I only have one day off work this week and well, I mentioned to my buddy that hey I got a whole day of relaxation.

Next thing you know, the truck looked like this.

http://i58.photobucket.com/albums/g2...3/IMG_0910.jpg


and this was out behind it :metal:

http://i58.photobucket.com/albums/g2...3/IMG_0918.jpg

STAY TUNED!!!

Re: Project NOT4SLE
 

progress......

Re: Project NOT4SLE
 

should be done by tonight with the rear!!! :metal::chevy:

Re: Project NOT4SLE
 

looking forward to updated picts.....

Re: Project NOT4SLE
 

looking forwaard to seeing your rear! (that didnt sound right!) :lol:

Re: Project NOT4SLE
 

Thats funny, I have that same mirror. I bought it at the Turlock Swap Meet about 1 yr ago, and still havent installed it. Damn I am slow :lol: You keep up the good work !

Re: Project NOT4SLE
 

Keep at it....can't wait to see the suspension installed!!!!

Re: Project NOT4SLE
 

Today was problem after problem. I got them all worked out and should be on track to get her done tomorrow.
I started by removing rivets EVERYWHERE!!!

http://i58.photobucket.com/albums/g2...3/IMG_0913.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0912.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0914.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0915.jpg

It all started with knowing I need a new transmission main seal and a new "horseshoe" style carrier bearing. Mine was trashed which is probably why my transmission main seal was leaking too LOL

http://i58.photobucket.com/albums/g2...3/IMG_0923.jpg

So in case anyone is wondering there is about 7-8 different carrier bearings use on these trucks. the two different styles and a few different sizes of each. I finally got the right one for my driveshaft, the horseshoe style so it works on the porterbuilt cross member and the 1.181 I think inside diameter for my "non" slip yoke 2 piece driveshaft.

heres the part number if your needing one. FYI NO ONE listed this part on the website of all the popular auto chains except Auto Zone. Here is the Timken part number now though so you can pretty much go anywhere to get it.

http://i58.photobucket.com/albums/g2...3/IMG_0927.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0926.jpg

Once the tranny seal was installed and the carrier bearing located I got the rear end out and started washing, and scrubbing, and washing and scrubbing and then painted it with some spray paint for now. Made it look 100 times better :metal:

http://i58.photobucket.com/albums/g2...3/IMG_0929.jpg

Re: Project NOT4SLE
 

Then I mounted up the lower shock mounts, and trailing arms from Porterbuilt.

http://i58.photobucket.com/albums/g2...3/IMG_0931.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0932.jpg

After that I started cutting the frame for the C notch. Of course remember measure once, twice, and mock and go ahead and eyeball and measure some more HAHAHA

http://i58.photobucket.com/albums/g2...3/IMG_0933.jpg


http://i58.photobucket.com/albums/g2...3/IMG_0934.jpg

Il have to wait to finish it up as I need some more C clamps from the auto parts store in the morning to get it all tighten up.


On a side note here is a flat purple Subaru WRX that my buddy painted today along with the owner. She is 19 and REALLY REALLY helpful and eager to learn. Oh, and yes.... its VERY fast.

http://i58.photobucket.com/albums/g2...3/IMG_0942.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0936.jpg

Re: Project NOT4SLE
 

Flat purple, wow looks good. Those cars are fast from the factory and with simple mods are wicked. Nice progress on your frame man. The longest time spent on my frame was removing those damn rivets. Drilling, grinding, gnawing with my teets. Some of them were real pains where they were located.

Re: Project NOT4SLE
 

Air hammers with a chisel bit are the cats a$$ when removing rivets. Takes about 10 seconds per rivet and then just punch them out. Very Very easy!!!

Re: Project NOT4SLE
 

Love to see progress....just a friendly reminder....WEAR YOUR SAFETY GLASSES!!!!!:D

Re: Project NOT4SLE
 

:agree: It's looking good. But you won't be able to see it with metal in your eye. Jason, the guy helping me has had two metal pieces in his eye over the last few months. I've has some close calls and even one that stuck into the safety glasses right in the middle so I know that one would have been a painful one...

Re: Project NOT4SLE
 

Purple looks cool but if she is really eager to learn, have her learn how to use the proper safety equipment, like at least a resperator. Toxic fumes will get to her eventually, if she keeps that up. There are some really screwed up ex-painters out there... at least the ones that haven't died yet.

Keep up the good work on the truck!!!

Re: Project NOT4SLE
 

Ya I try to grab the glasses when grinding and suck but Ill take them off and then put them on and then sweat a bit and take them off. LOL

made some more progress today. Got one notch completed and boleted in and the other cut and c clamped and ready to be bolted in.

I have to say though I am AMAZED!!! I put the crossmember in and dropped the bolts right in all 8 holes through the frame. Porterbuilts designs, cutting, and fab work is SPOT on!!!

Ill update with pics tomorrow.

Re: Project NOT4SLE
 

Got a little more done yesterday before having to head off to bed. heres some up dated pics

http://i58.photobucket.com/albums/g2...3/IMG_0962.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0963.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0965.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0966.jpg

http://i58.photobucket.com/albums/g2...3/IMG_0967.jpg

Re: Project NOT4SLE
 

I really like those control arms...When we did my truck those rivets were not an issue to an air chisel we got them out in no time. It does get loud as heck when using the air chisel.
Looking pretty good keep the picts coming.

Re: Project NOT4SLE
 

nice progress

Re: Project NOT4SLE
 

what did u end up using to clean the frame up for paint?

how did you go about your painting progress?

Re: Project NOT4SLE
 

Ya, the air chisel was not that bad. My weapon of choice when doing rivets

Thank you, Many many plans but seen as how it is the daily driver right now It is planned out plans.

Oven cleaner and pressuer washer. Seemed to work OK, Still have a final scrubbing to do of under the bed before it goes back on.


I did make progress today but had a couple of steps back too. My bearing was seized on the driveshaft so in the process of taking it out it screwed the threads up for the coupler. So I got a longer bolt, ran a tap through but no dice, pulled the threads out. So I have not tapped it out to a 9/16" course thread and will pick up a bolt tomorrow.

Everything else is installed, shocks, springs, everything , minus the driveshaft. So tomorrow it should be back on the wheels. and lowrider in the rear only till the front gets done next week.

Re: Project NOT4SLE
 

get pics your lucky its warm where you are lol

Re: Project NOT4SLE
 

Lookin great brother!