Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 Painting the inside of cab with encapsulator paint.
Pic 2 Front part of inside of cab. |
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 Making new trans cover to fit 700R4
Pic 2 It was made in a couple pieces, in case we need to get to shifter parts. Pic 3 Another view. |
Re: Jimbo's 67 Long bed step side build
4 Attachment(s)
Pic 1 Making mount for Lokar emergency brake handle.
Pic 2 Close up view. Pic 3 Handle in place. Pic 4 Another view. |
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 Doing more finish work on lower part of firewall.
Pic 2 Still working on back of cab. |
Re: Jimbo's 67 Long bed step side build
5 Attachment(s)
Pic 1 Started making up the exhaust system, drivers side. Used 2-1/2" pipe.
Pic 2 More of exhaust system. Pic 3 Routing over the axle, etc. Pic 4 Not to clear, but you can see some of it. Pic 5 Pass. side has been tacked in place. |
Re: Jimbo's 67 Long bed step side build
5 Attachment(s)
Pic 1 Bracket made to support pipe.
Pic 2 This is my home made isolators, work very well. Pic 3 Showing both sides in place. Pic 4 Bothe sides done. Pic 5 Mount and flanged, so it can be taken apart for coating. |
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 Flange, bracket combo at muffler.
Pic 2 Bracket for back part of exhaust. Pic 3 Doing final welding. |
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 Exhaust all disassembled.
Pic 2 Box for shipping to HPC in Oklahoma City, Okla. Pic 3 All parts in box ready to go. |
Re: Jimbo's 67 Long bed step side build
Hope you enjoyed todays post, see you tomorrow.......Jim
|
Re: Jimbo's 67 Long bed step side build
Pretty neat. Nice to see some shiny stuff peeking at us now.
I'm fitting up a dual exhaust kit right now (without welding capability), so it's refreshing to watch you cut and fit as you like. It looks like you have experience working with many types of materials, too. That always comes in handy. Did you work in a GM St. Louis plant by any chance ? Your fan, Jim |
Re: Jimbo's 67 Long bed step side build
Quote:
|
Re: Jimbo's 67 Long bed step side build
Great build!!!:D
Look forward to your future updates. :) Spike:smoke: |
Re: Jimbo's 67 Long bed step side build
Quote:
|
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 Mocking up AC, alt, and power steering brackets before removing engine for clean up.
Pic 2 This is the 327 engine, getting ready to tear apart for checking and clean up, etc. |
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 Bottom of cab in epoxy primer.
Pic 2 The next day bottom of cab being sprayed in regular primer. Pic 3 Another view, all in regular primer. |
Re: Jimbo's 67 Long bed step side build
4 Attachment(s)
Pic 1 Taped up and ready to spray cab with epoxy primer.
Pic 2 From view. Pic 3 All in epoxy primer Pic 4 Front view in epoxy primer. |
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 The next day it was sprayed with regular primer.
Pic 2 Front view. Pic 3 The next day started blocking regular primer. |
Re: Jimbo's 67 Long bed step side build
4 Attachment(s)
Pic 1 My son Mark modifing old engie mounts to clear headers.
Pic 2 Drivers side was already cut. Pic 3 Both sides done, added angle iron to original mount and then bolted on at bottom of frame lip, needed it this way for header clearance. Pic 4 Close up view. A little grinding and filler, should look good. |
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 Cab sprayed with regular primer again, with guide coat.
Pic 2 Cab ready for final sanding. |
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 Disassembly of frame for sand blasting.
Pic 2 Removing some of the old greasy crap from front crossmember. |
Re: Jimbo's 67 Long bed step side build
Well that should keep you picture junkies happy till tomorrow..............Jim
|
Re: Jimbo's 67 Long bed step side build
NO! we want more! haha, JK, looks great so far!
|
Re: Jimbo's 67 Long bed step side build
Quote:
|
Re: Jimbo's 67 Long bed step side build
wow i never thought of myself as a picture junkie until now...:lol:
i'm a little relieved that you didn't work in St. Louis plant so i won't be tempted to pump you for assembly info haha movin' right along lookin' fine. jim |
Re: Jimbo's 67 Long bed step side build
Quote:
|
All times are GMT -4. The time now is 01:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com