Re: slik ricks 67 short wide CST
 

What catalog does that # go to lol?

I need a 3 hole bezel with 2 holes on the left for headlights/wipers, and 1 hole on the right for the choke.

Re: slik ricks 67 short wide CST
 

oh i thaught you had the 7 hole it was LMC lol

Re: slik ricks 67 short wide CST
 

What ? No Tach ??? :lol: She's coming along nice! Nice work !

Re: slik ricks 67 short wide CST
 

tanks jorge why do i need a tach if i am running an automatic????? :lol:just joking

Re: slik ricks 67 short wide CST
 

Keep it up. It's looking really nice.

Re: slik ricks 67 short wide CST
 

why do i need a tach for my 4 speed?? i have one ear on each side ;)

Re: slik ricks 67 short wide CST
 

thanks richard what have you done to your 70

Re: slik ricks 67 short wide CST
 

:metal: Alright Rick looking good man Im liking those door sill plates with the bowties on them where did you find those and are they chrome or pss if you dont mind me asking.

Re: slik ricks 67 short wide CST
 

hope this helps
spike:smoke:

Re: slik ricks 67 short wide CST
 

you wouldnt mind selling that would you!:devil:

Re: slik ricks 67 short wide CST
 

At this point, I may still use it.
But if I change my mind, I'll let you know.

Spike:smoke:

Re: slik ricks 67 short wide CST
 

well i might end up findidng one before you make up your mind

Re: slik ricks 67 short wide CST
 

oh i got them from www.truckandcarshop.com

Re: slik ricks 67 short wide CST
 

well heres a couple more pictures i thought the one from the front of the truck looked cool also i took pictures on the first day i got my cab and took a picture of the picture it is best i can do we picked it up in my dads 70:lol:oh and one of the build sheet which i taped toghether http://67-72chevytrucks.com/vboard/p...ictureid=11245 http://67-72chevytrucks.com/vboard/p...ictureid=11246 http://67-72chevytrucks.com/vboard/p...ictureid=11247

Re: slik ricks 67 short wide CST
 

Thanks Rick I have there catalog around my room somewhere but did you get the chrome or the stainless steel and how are you liking them so far.

Re: slik ricks 67 short wide CST
 

they are nice i like them but i cant remeber what i got stailess or chromed ,i think i got the chrome because it is easier to clean but not sure

Re: slik ricks 67 short wide CST
 

Yah I was thinking about going chrome also I like these alot better than the reg. sill plates and I was trying to come up with more ways to incorporate more bowties into my interior so this helps by chance do you have any other ideas to help me out.

Re: slik ricks 67 short wide CST
 

well in my opinion getting the billet covers for the glovebox door and guages are just stupid i think that the sills should have bow ties mybe some one could sew a bowtie on some sunvisors and seatacorss the horn button maybe you could make a emblem that sticks on the glove box door kinda like how they got the ''chevrolet custom''

Re: slik ricks 67 short wide CST
 

Thats what I was thinking with the visors and the seat and I agree with the billet gauge cluster and glove box it looks out of place to me I was also thinking about putting one on each door panel at the bottom but I'm not quite sure what color of bowtie to do since my door panels are gloss cherry red with black armrest but I may redo the panels in black.

Re: slik ricks 67 short wide CST
 

Hey man, once you get that truck on the road you'll wanna swaybar, probably one of the BEST upgrades I made to my truck.

Look for a 3/4 ton or 1 Ton 2wd chevy/gmc truck get the front swaybar off it with all the brackets you can get, then go to orielly and get some MOOG BUSHINGS for it. Will make it handle AWESOME! Did you get discs for the front yet?

Re: slik ricks 67 short wide CST
 

who are you talking too john

Re: slik ricks 67 short wide CST
 

if i had a 69 72 truck i would still put 67 68 door panels in them i like the look of em better you should throw up some ics of the truck did you ever make a build thread or was it just the ''new kid''

Re: slik ricks 67 short wide CST
 

Yah I got the plain metal door panels they were covered but I didn't like the look so I took them off and I never got around to making a build thread I get so busy and end up using what little money I have for school I end up putting the truck on the back burner. If I still had all the money I had saved for the truck all together it would've been done with just about everything brand new and a fresh paint job on my 16th bday but things just keep getting in the way.

Re: slik ricks 67 short wide CST
 

ya its under standable trucks they are there for ya you can stick em on the back burner and they will be there when your ready

Re: slik ricks 67 short wide CST
 

well e brake stuff coming on tuesday !!!!!:metal::metal::metal::metal::metal:

Re: slik ricks 67 short wide CST
 

Cool pics Rick looking forward to more updates

Re: slik ricks 67 short wide CST
 

thanks eric!!! hey can you send your # i dont have it any more:waah:

Re: slik ricks 67 short wide CST
 

well i wish everyone a happy new year! and may you be blesse dwith a great truck ! i cant wait for all the swap meets and car shows and cruse ins!!!!!

Re: slik ricks 67 short wide CST
 

Thanks Rick you too! PM sent on the phone number. ;)

Re: slik ricks 67 short wide CST
 

thanks eric!

Re: slik ricks 67 short wide CST
 

well down the line i am probably going to smooth my radiator support of all the extra holes and the ''horns'' but i will be keeping the factory radiator hold downs. heres a pic of n2billets 67 almost what i want to do to mine!http://67-72chevytrucks.com/vboard/a...1&d=1263083535

Re: slik ricks 67 short wide CST
 

happy new years Rick the trucks looking awesome!! That steering wheel and guage cluster look sweet! Thats the same cluster as mine but im not sure i might go with one with a tac.

Re: slik ricks 67 short wide CST
 

thanks david! thanks ya i wonder if i will change as well

Re: slik ricks 67 short wide CST
 

well guys march 6 1967 my truck was made so what should i do to celebrate its 44th birthday!

Re: slik ricks 67 short wide CST
 

give it a autozone gift card.:lol::metal:

Re: slik ricks 67 short wide CST
 

THEY ARE RACIST TO ME AND MY DAD AND MOST OTHER WHIE PEOPLE I SEE IN THERE!:lol: maybe kragens or napa :D

Re: slik ricks 67 short wide CST
 

well i have checked the local kragens and there ignition and headlight switch are relitivey cheaper then lmc or truck shop

Re: slik ricks 67 short wide CST
 

ignition switch is like 12$ lol @ autozone

Re: slik ricks 67 short wide CST
 

Hey rick if you change clusters id be interested in yours..

Re: slik ricks 67 short wide CST
 

awsome truck. where did you find a 302 at? i would love one of those motors for my nova!
Posted via Mobile Device
Posted via Mobile Device