Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Some of today's progress. We a shooting to have the truck finished by June 14th for a local Father's Day show.
The armrest from Dennis Carpenter needed some finishing work before we dyed them to match the seat material. http://i1315.photobucket.com/albums/...76110322_n.jpg After smoothing the edges with 500 grit. http://i1315.photobucket.com/albums/...55873091_n.jpg Dad found a NOS seat bottom locally to use as a pattern. http://i1315.photobucket.com/albums/...32755802_n.jpg Backrest vinyl from SMS with the correct heat stamped logo and pleats. http://i1315.photobucket.com/albums/...08508669_n.jpg Fabric from SMS matches the imprinted pattern of the original material. http://i1315.photobucket.com/albums/...68396303_n.jpg http://i1315.photobucket.com/albums/...02798944_n.jpg |
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
This time next Saturday we'll have it at it's first show... lots to do until then!!
Dad's been working on the seat bottom yesterday and today. It's mostly finished, he still has a little "fine tuning" to do. For whatever reason SMS sent us pre-cut material for the seat face.... four inches too narrow!! Called them back and asked why they sent pre-cut sections and they said that that's all they had... and they cut the whole roll that way. :mad: Would be "awhile" before they made another run of the fabric in the correct width (60"). They didn't mention that when we ordered the material. So the boxing is a little taller than it should be on the sides, but what else do you do when you only have a week to finish it and no other known material source? :waah: http://i1315.photobucket.com/albums/...01507830_n.jpg http://i1315.photobucket.com/albums/...97239723_n.jpg Backrest in place to mark the pattern so Dad can line up the back rest cover with the seat bottom. http://i1315.photobucket.com/albums/...47658200_n.jpg Arm rests dyed to match the seat vinyl. http://i1315.photobucket.com/albums/...89416237_n.jpg I have a matching pair of original paint '66 plates from my '66 C10 that I'm putting on temporarily for it's first show. I scuffed them and shot a few coats of clear to preserve the original paint. http://i1315.photobucket.com/albums/...24775728_n.jpg |
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Dad's nearly done with the backrest, these were some progress pics.
http://i1315.photobucket.com/albums/...56682036_n.jpg http://i1315.photobucket.com/albums/...17284832_n.jpg Heavier gauge steel rod for the adjusters. This won't ever stretch out of shape and become loose, and the cardboard wrap will keep it from rattling if the springs bottom out on it. http://i1315.photobucket.com/albums/...92245975_n.jpg http://i1315.photobucket.com/albums/...05051468_n.jpg Rangoon Red and Whimbledon White sprayed. Letters are masked, I'll spray the Sahara Beige and a few coats of clear tonight. http://i1315.photobucket.com/albums/...06487212_n.jpg |
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Looking good!
-Sam |
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Absolutely gorgeous. ...
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Quote:
Quote:
Thanks!!!! Truck is 99% finished now and we took it to it's first show today!! Had a great day at a local Father's Day show, took the F100 and the blue '65 C10 that I finished about three years ago. Can't wait to get the pair out again! I'll go ahead and post the rest of the progress pics, then post pics from the show to keep things in order. Was a loonnnggg week getting it ready!! Zinc plated tailgate handle bucket was hazy so I tried Mother's polish... helped but still didn't look good enough. http://i1315.photobucket.com/albums/...69530513_n.jpg Used 0000 steel wool and Mother's to really shine it up. http://i1315.photobucket.com/albums/...66193185_n.jpg Wetsanded and buffed the bedsides. http://i1315.photobucket.com/albums/...27619770_n.jpg Also sanded and buffed the tail light lenses. http://i1315.photobucket.com/albums/...65406454_n.jpg Bed and side trim back in place. Looking like a truck at this point!! http://i1315.photobucket.com/albums/...25434207_n.jpg Interior mostly finished up. http://i1315.photobucket.com/albums/...44952737_n.jpg http://i1315.photobucket.com/albums/...45712898_n.jpg http://i1315.photobucket.com/albums/...39948770_n.jpg Last piece of the puzzle. I finished wetsanding and buffing the tailgate late Friday night, then got it installed by about 9 pm. We bolted the bumper up after that and waited til this morning to adjust it level and tighten it down. http://i1315.photobucket.com/albums/...29564923_n.jpg |
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Incredible!
Steven |
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Beautiful!!
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Awesome! !! Looks great
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Quote:
Quote:
Quote:
http://i1315.photobucket.com/albums/...77065194_n.jpg http://i1315.photobucket.com/albums/...18342899_n.jpg http://i1315.photobucket.com/albums/...69470379_n.jpg http://i1315.photobucket.com/albums/...76878598_n.jpg http://i1315.photobucket.com/albums/...46883519_n.jpg http://i1315.photobucket.com/albums/...37687589_n.jpg http://i1315.photobucket.com/albums/...15306560_n.jpg |
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
It's not my style and I think it would look better modified, but you did an outstanding job on that truck very well done congrats.
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
You can bet that it is nicer now than when it was new....just awesome
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Beautiful job, bet you can't believe it's over.
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Thanks for posting this build. Really like all the information that you have provided. It will help on any project not just pickups. I like what you have accomplished.
Dwight |
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Absolutely Beautiful. You all should be rightly proud.
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Drop dead gorgeous! That must have been like a magnet at the car show. Ok, what's next? :lol:
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Thanks dudes!! Robert, we're starting a '40 Packard Convertible next week. Haven't seen it in person yet, but from pics it looks like it'll need plenty of metal work. |
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Please be sure to start a build thread on that Packard. I'm already looking forward to that one.
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Quote:
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Dam its not just the level of detail that impresses me it's the shear determination needed to see the job through. It must be so hard handing the keys back to the owner!
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Quote:
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
I just did that last night. Kind of unnerving!
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
The truck will be featured in our local newspaper this Friday in the automotive section. I snapped a few pics from the photoshoot. They've been driving it a little, it's up to 82 miles. The lady sitting in the truck is the owner's mother, and the building it's parked in front of is the dealership it was bought new at.
http://i1315.photobucket.com/albums/...99921469_o.jpg http://i1315.photobucket.com/albums/...37056515_o.jpg http://i1315.photobucket.com/albums/...52030401_o.jpg http://i1315.photobucket.com/albums/...27532635_o.jpg |
All times are GMT -4. The time now is 09:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com