Re: My 93 Crewcab Build
 

Nice work!
You have you cruised it around your folks neighborhood to see how she runs now? :burnout:

Re: My 93 Crewcab Build
 

If for some reason you don't get the truck and trailer going I have one we can bring it on.

Hopefully you won't need it.

Re: My 93 Crewcab Build
 

Cool man thanks for the offer, we are going to work on it tomorrow so it should be ready to rock and roll, now just some 62 time in there somewhere..

Re: My 93 Crewcab Build
 

Yeah Travis and I were talking yesterday that we needed to have a work day out at your place.

Re: My 93 Crewcab Build
 

:metal::metal::metal::metal:

Re: My 93 Crewcab Build
 

Yeah but we probably should have done it today. :lol: We're running out of weekends before the truck meet and I have alot to do yet on mine.

Re: My 93 Crewcab Build
 

Yeah no kidding..

I got the crew back together and out of the shop. The engine is still acting funny like the computer or something is goofy but it runs ok.

Put the 62 in the shop and getting it ready to work on again, hopefully..

Worked on the trailer front rail and on the toolbox we are making for it but have to finish that all up so i can take my welder back to the shop to use it on the 62.

Re: My 93 Crewcab Build
 

So the crew is basically ready to haul the 62 to the meet? :D

Re: My 93 Crewcab Build
 

does it shift now?
when are you gonna match up the bolt patterns? :lol:;)

so what is the plan on the six-duece?

Re: My 93 Crewcab Build
 

No i wouldnt go that far yet.. :lol:


After the meet ill switch all the front over, id like to get it running right first.

And no i didnt drive it out of the driveway because if i gave to too much gas it wants to die still. Im thinking if the cool/air temp sensor isnt giving me problems.. im going to try and unplug it to see what happens.

Going to sand the fenders and finish up a bit of body work on it and get it in some primer. Want to try and get the rack and pinion on it too but not sure if i can in time or not.

Re: My 93 Crewcab Build
 

cool!

Re: My 93 Crewcab Build
 

So are you planning on pulling with the 3/4 or still trying to get the crew ready too?

Man you are going to be busy.

Re: My 93 Crewcab Build
 

Ill just pull it with the ugly green machine unless i can pull off a miracle :lol:

Re: My 93 Crewcab Build
 

You Can Do It! :metal:

Re: My 93 Crewcab Build
 

:lol: :lol:

Re: My 93 Crewcab Build
 

I havent done much at all to the crew, Joe did happen to run to Pull-a-part and picked up a lower control arm for me while he was out there, now i can start the front end swap well after the 62 gets a little farther of coarse ;)

Re: My 93 Crewcab Build
 

It is too bad with all the rain. I would like to go rummaging out at pullapart.

Re: My 93 Crewcab Build
 

Yeah, but we will be wanting this rain in a few months. :lol:

Re: My 93 Crewcab Build
 

I know me too! I need some stuff.. just odd and end pieces and parts but its still cool to go out there.

I took my father in law one time to look for a door handle for his car and he said "Look at all the s**t, ive never seen so much junk in my life" i wanted to slap him and say man these are good parts and a lot cheaper that dealer or after market stuff :lol:

Re: My 93 Crewcab Build
 

I just like looking at stuff and day dreaming what I would do with it. There was one afternoon at work I was just stressed out of my mind with bs and deadlines. So, I took off the last two hours of the day and just went and walked around there and cleared my head.

Re: My 93 Crewcab Build
 

Yeah i do the same, pay the buck and just see what you can find and cant live without :lol:

Re: My 93 Crewcab Build
 

Last time I found a gm antenna adaptor. I showed it to the guy and he waved me through. Those things are like 8-10 bucks. I bought one right before that and a week later I found one my old roommate left in the closet of his old room lol.

Re: My 93 Crewcab Build
 

:lol: thats funny

Re: My 93 Crewcab Build
 

I went to the picknpull yesterday, $2 to walk around, didn't find what I was looking for and everything was all hacked up. But there is a clean 87chevy that they will be moing out into the yard hopefully this weekend so I will be busy. :) always like taking pix at the chevy trucks.

Re: My 93 Crewcab Build
 

Heck yeah! Post em up!

Re: My 93 Crewcab Build
 

I put them in my build thread, and I will add more as I go, Man your crew is looking good!

Re: My 93 Crewcab Build
 

Cool ill check them out, Thanks! Just need to figure out why its not running quite right :(

Re: My 93 Crewcab Build
 

Because you are working on the 62? :D

Re: My 93 Crewcab Build
 

:lol: well that too but when i take a break from it ill mess with the crew im jumping back and forth and its making me :m6: :lol:

Re: My 93 Crewcab Build
 

Did a compression test on it yesterday while i was out there, here are the numbers..
http://i276.photobucket.com/albums/k...k/Untitled.jpg

Not too happy with #7 cylinder but at least its enough to fire the plug...

Re: My 93 Crewcab Build
 

isn't that the #7 cylinder?
are big blocks numbered the same as small blocks?

Re: My 93 Crewcab Build
 

Yeah, sorry had a my bad moment... you must have saw the first post when it was #8 :lol:

Re: My 93 Crewcab Build
 

:haha:
good, I thought I was loosing it :rolleyes:

Re: My 93 Crewcab Build
 

Thats what you think ;)

Any luck with a schematic or whatever he was looking into?

Re: My 93 Crewcab Build
 

:lol:
He is working on it, we need to find a OBD-I scanner or I need to build this
http://www.techedge.com.au/vehicle/im/m232pcb.jpg
http://www.techedge.com.au/vehicle/aldl8192/8192hw.htm
so we can use my laptop to view the data stream.
he also thinks, by the code from the computer, that someone may have swapped in an older computer.....the plot thickens.....;)

Re: My 93 Crewcab Build
 

Well thats cool, if we build that will it read the codes and it might be able to talk to a scanner?

Looks intimidating to make to me :lol:

Re: My 93 Crewcab Build
 

yeah, if we build that, we can see the live data stream and see what is working and whatnot.
first thing we need to do is verify the power and grounds are all good as soon as we get the correct schematic.

Re: My 93 Crewcab Build
 

Cool, i thought by fixing those bad grounds it would help it a bunch but only the starting part :lol:

Re: My 93 Crewcab Build
 

is this thang done yet?

Re: My 93 Crewcab Build
 

Hey dont you use that ton of voice around here :haha:


No been working on the house and other stuff.. it needs a computer more than likely and just finish up the loose ends and it will be drivable..