Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave - I'm in for a non-efi, bed fill, ROV and 90 ohm sender set-up. Let me know when you're ready to pull the trigger. Mac

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Just got back from Iraq and need a EFI, in bed fill tank and in tank fuel pump option as I'll be running an LS1. The truck is a 1966 C10 SWB. Thanks

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

needing a non efi tank.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

EFI Tank for me
Posted via Mobile Device

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Wish I would have waited for this group buy... Finally got mine installed and its pretty incredible. Looks great...fit great...easy to install. I give them an A+ on it!!

http://funkytechmonkey.com/C10/PICS/...tnIMG_1586.jpg

http://funkytechmonkey.com/C10/PICS/...tnIMG_1587.jpg

http://funkytechmonkey.com/C10/PICS/...tnIMG_1589.jpg

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

That looks real good Brian, it is so temping to get one of these....must resist...

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I see you are running the PB rear tubular crossmembers, did you need to specially order your tank or is that the standard dimensions?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

It was standard.... Matches up perfect

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Any updates? The big announcement is supposed to be today. Just waiting for the details and I'm ready to order an EFI tank for fleetside with bed fill. Been waiting foreverrrrrrrr......:lol:

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Waiting also, could use it ASAP. Hope is is soon!!!!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Well i can launch this anytime and we can build as many tanks as we need. I wont be able to supply the fuel level sending units because of supply problems. i have ordered 150 senders and i will have 20 by the 17th which are already accounted for in production. the rest will be 60 days out.

If everyone is ok with sourcing their own sender I will launch it today.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Launch Away !!!!!!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

In ok with that as long as you can point us in the right direction with a part number or application.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Same as above :) Lets get em going!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I agree with those guys. I'm ready for this beauty! I would also like a recommendation for the sending unit please. EFI tanks still sent with fuel pump and rollover vent, just no sending unit?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Universial 0-90ohm sending unit on Ebay for roughly $50.00 (new)

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

GROUP BUY!!!

STANDARD NON-EFI TANK $299.00 SHIPPED ANYWHERE IN THE LOWER 48 INCLUDES ROLL OVER SAFETY VENT

EFI TANK $ 549.00 SHIPPED ANY WHERE IN THE LOWER 48 INCLUDES AEROMOTIVE STEALTH 340 IN-TANK PUMP AND ROLL OVER SAFETY VENT


I am not going to set a limit on how many spots are open but this will only run for 7 days.

Please remember because of supply issues we will NOT be supplying a Fuel level sending unit in your tanks. you will need to source them yourself. any aftermarket 5 bolt sending unit will work with the flange that will be welded to your tank. 67-72 chevy trucks use a 0-90 ohm sending unit.

Also notice that we have upgraded the pumps in all EFI tanks from the Walbro to the Aeromotive Stealth 340 part # 11142.

With this pricing there will not be able to be any structural or fitting changes. Fabrication times are 7-10 business days

The website is now updated with the special pricing and ready to go. Purchase your tank here: http://www.boydwelding.com/category/products/chevrolet

call me if you have issues placing your order.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Pppsshhhhh.... Wish I would have waited for this deal. I should buy a second one just to have it for my next build 3 years down the road.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I did see there were 1 or 2 orders that were placed today. I will be applying this group buy price to those when i get in the office tomorrow morning.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave... I bought mine a few months ago, already installed it and love it. There are some pics if you scroll up. Thanks for the good work!!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Ordered this morning, Thanks Dave !!!!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Not sure if this one fits or not, but CPP has them for 49.99 as well
http://www.classicperform.com/Store/...rucks/VSU3.htm

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Order placed. Thanks for the great deal, Dave!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Just placed my order, thanks Dave!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Yes that sender will fit our flange.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Order is in!! Thanks Dave

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Ordered mine yesterday, thanks for the great deal!!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I am very interested and as soon as I can communicate the order it ewill happen.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

let me know what questions you have... we will do what we can.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Just ordered mine! Can't wait to get it in! What sending unit do I need for an EFI tank or what do you recommend?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

My plans to date is the 68 SWB truck with a LS-1 powerplant. The issue that I have is that the previous builder put in a Pete and Jakes coilover rear suspension, that is of a four link design. I am hoping that the measurements would still be the same considering t he panhard bar, so that a standard tank could be used. I need to know what I need to measure so that you know what to build to, if it is not a standard size hole. With this setup, I will have to get creative with my exhaust, too.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Just ordered one as well! Can't wait to get it! Thanks

Jerry

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Placed my order today! Another part to stack in the ocrner.....

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Ordered mine today. Thanks for the great deal Dave.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Gas Tank for 64 GMC
Dave
I have a 64 GMC that I would like to get a custom tank for. The tank is in the stock location behind the front seats in the cab. I have 2 ideas for relocating the tank.
1 idea would be to put it in the back between the frame rails but instead of having the filler through the bed I would like and try to design it to come out behind the rear license plate. The second would be to have a gas tank/storage combo that would sit in the bed behind the cab, the bottom portion a gas tank and the middle being an area to mount the battery and the air tank and pumps and the very top for a lift out storage tray. In a perfect world the tank would connect through the cab and fill from the stock filler location. Can you give both of these some thought and let me know if you would be interested in building me a custom tank.
Thanks
Rob Fisher
robfisher5@shaw.ca

Here is a drawing of the tank to go in the back behind the rear end.
It would mount to the underside of the frame to allow clearance for the filler.
Calculating the cubic feet it looks like it would hold about 23 gallons.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Any chance of getting in on this yet

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Man, I missed it, new to the Chevy C10 group and just started doing a search for gas tanks and came across this post. Hope you will do another group buy soon, I love the tank. I doesn't look like it hangs low, I have a roll pan and don't want to see tank when I look at the back of the truck.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Received mine today, mounted and fits perfect!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

If there is another group buy I am in. Looking to purchase asap as my build is about to start. Looks like a great tank.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

The "Big Brown Truck" dropped it off last nite. Looks great and its going on today. Thnx Dave for a great deal!!!:bann: