Re: New 64 Stepper Project
Looking good all these parts...
"Those that do not know how to build a motor say that" now that is funny. I ran chrome for years and now i am doing all powder coated or painted just for change. But this build is looking good sir. |
Re: New 64 Stepper Project
The parts are looking great. I'll bet you can't wait to get them on your truck.
|
Re: New 64 Stepper Project
I'm way happy to be starting yes.
I started on the door assembly. Funny thing, I ordered some Flatline Barrier Sound and insulation from Summit. Parts # is FB04, shows a 36" X 12" Piece. So I bought two just in case. The two boxes came in from their vendor, outside it said FB04 from Flatline. There are 25 pieces in each box. :lol: So I'm on hold until I get it fixed with Summit, don't want them coming back and saying I owe them $900. ;) Started the Steering column install and wiring though, post a pic after I eat. |
Re: New 64 Stepper Project
2 Attachment(s)
So here is a good start on the column.
|
Re: New 64 Stepper Project
Shiny & Red is a great look.
If Summit doesn't want any of the extra parts back, I'm pretty sure there are a few people on this forum who'd take it off your hands. |
Re: New 64 Stepper Project
Lookin' great! You got to come back to your truck right as I had to leave mine :lol:
|
Re: New 64 Stepper Project
You bet. The entire time I was gone, thats all I could think of. Kept me going. :)
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
Looking good...glad to see you home so you can be back at it!
|
Re: New 64 Stepper Project
wow vary nice
|
Re: New 64 Stepper Project
Wow, that is looking great!
|
Re: New 64 Stepper Project
So Summit finally got back to me about their vendor sending me too much sound deadner/heat shield. Seems they (the vendor) will be sending me the correct stuff and a UPS will call to send out the boxes of incorrectly sent items.
Slows my whole door process down quite a bit. Once the glass goes in can't get in the sound deadner. And my door mirror, the three fastener holes are 5/6"-18 not 1/4"-20 that was sent with the mirror, another slow down. I ordered three stainless ones from the bolt depot, so I'll be polishing those when they get in. Guess it's time to call Extreme Automatics for my transmission and Blueprint Engines for the engine. |
Re: New 64 Stepper Project
Looks amazing....
|
Re: New 64 Stepper Project
3 Attachment(s)
Got the engine in I ordered at Summit.
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
A 350 by Blueprint Engines.
|
Re: New 64 Stepper Project
If you don't mind me asking. Why a 350 as apposed to a 383 stroker or something like that?
|
Re: New 64 Stepper Project
I never gave any thought. I know 350's and hear mixed issues on 383's and I don't want any issues on the big guys truck. The BluePrint BP3503CT1 has more than enough horse power to get me where I want to go. I'm not into breaking things anymore.
|
Re: New 64 Stepper Project
2 Attachment(s)
Transmission came in from Extreme Transmissions.
|
Re: New 64 Stepper Project
Very nice.....
|
Re: New 64 Stepper Project
Quote:
Happy you got this motor, it is enough to get you down the road and could get you into trouble, so I always say that this would be enough.... LOL |
Re: New 64 Stepper Project
Quote:
Quote:
|
Re: New 64 Stepper Project
Motor/trans already looking better after landing in your hands...
:metal: |
Re: New 64 Stepper Project
1 Attachment(s)
Speaking of hands, ow.
Installed all by myself. |
Re: New 64 Stepper Project
Quote:
|
All times are GMT -4. The time now is 06:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com