The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - AL GIANT 60-66 parts Stash Barn Find!! (https://67-72chevytrucks.com/vboard/showthread.php?t=513293)

Re: GIANT 60-66 parts Stash Barn Find!!

hello- need radiator hold down bracket for 66 v8.
or
a single lower bracket (would need to be cut or drilled out... I suspect)
thanks
paul
florida 34698 (near tampa)

Re: GIANT 60-66 parts Stash Barn Find!!

pls PM me with your price on the delivery

Re: GIANT 60-66 parts Stash Barn Find!!

what would you take for the delivery? pls PM answer

Re: GIANT 60-66 parts Stash Barn Find!!

I'm looking for a single door check bracket for our '61
It bolts to the A pillar between the hinges.

Thanks, Thom

Re: GIANT 60-66 parts Stash Barn Find!!

Do you have a 65' panel or suburban passenger side interior upper trim piece?

Re: GIANT 60-66 parts Stash Barn Find!!

do you have a auto crossmember for a 64?

Re: GIANT 60-66 parts Stash Barn Find!!

What a score!! I'm looking for a 6cyl power steer brackets, pullies and pump. I live in Birmingham and would love to come check out what you guys have. When is a good time and could you send an address. Would tmrw be possible? Thanks!! :metal:

Re: GIANT 60-66 parts Stash Barn Find!!

Hello, I'm looking for a set of fender splash guards called "closing panels" in the assembly manual for my 1966 chevy C10 truck.They live in the front fenders and keep mud from the tires from flying...

Re: GIANT 60-66 parts Stash Barn Find!!

Quote:

Originally Posted by JOHNS65 (Post 6741581)

looking for high hump trans tunnel including the piece that goes between the tunnel and the firewall for a 65 c10 shipping to 60558

This guy hasn't responded to this thread in over 6 months

Re: GIANT 60-66 parts Stash Barn Find!!

Do you have a long bed available?

Re: GIANT 60-66 parts Stash Barn Find!!

would you happen to have a set of four 64-66 1/2 ton center caps?

Re: GIANT 60-66 parts Stash Barn Find!!

Do you sell the front windshield for a 66

Re: GIANT 60-66 parts Stash Barn Find!!

By chance do you have a 62 apache hood emblem? the bowtie with a chrome "V" under the h
Bowtie? Or any bubble style good emblem?

Re: GIANT 60-66 parts Stash Barn Find!!

I am looking for 2 pices of a high hump tranny cover ....shipping to 95407

Re: GIANT 60-66 parts Stash Barn Find!!

Quote:

Originally Posted by OldGMJon (Post 7019339)

This guy hasn't responded to this thread in over 6 months

He hasn't responded in 8 months now...:banghead:

Re: GIANT 60-66 parts Stash Barn Find!!

In need of a factory steering shaft clamp. I lost mine during the build.

https://fbcdn-sphotos-h-a.akamaihd.n...e5db241b2f0e00

Re: GIANT 60-66 parts Stash Barn Find!!

[QUOTE=w00dst0ck;7083531]In need of a factory steering shaft clamp. I lost mine during the build.

read post #341:waah:

Re: GIANT 60-66 parts Stash Barn Find!!

Sad thing is, he lives 45 minutes from me, I have his phone number and he never answers.

I am pretty sure he cornered the market around here on parts. I can't find anything except a guy from craigslist and he is very non committal about when I can come and look.

Steven

Re: GIANT 60-66 parts Stash Barn Find!!

How much for the cab and two doors? Could they be shipped to PA?

Re: GIANT 60-66 parts Stash Barn Find!!

im looking for a lower thermostat housing for 230 250 or 292. how much and to 92804 thanks

Re: GIANT 60-66 parts Stash Barn Find!!

Is this post still active? There has not been a reply in a while from what I can tell.

Re: GIANT 60-66 parts Stash Barn Find!!

Quote:

Originally Posted by GMCNUT (Post 5239947)

Per the rules ... parts and prices need to be posted. Thanks

Well, every now and again a guy just gets plain lucky. Myself and another board member (sweptline) were out scavenging for truck parts and stumbled across a guy who had 6 or 7 60-66 parts trucks in a fenced area with all kinds of grilles, steering colums, beds, doors etc all around them so we stopped and asked and it turned out he also had a whole building full of loose 60-66 stuff too. We saw a lot of stuff in this "barn find stash" that we both needed for our 3 or 4 project trucks and luck was with us because this guy really wanted to move all of it and totally get out of fooling with old trucks altogether, so we struck a deal and bought him completely out.

We are still hauling everything from his place to ours and do not have pictures of all the parts trucks, no even 1/3 of the parts we bought, but I uploaded the first 200 pictures covering what we have identified so far and you can see everything in my Webshots album by copying and pasting this link: http://rides.webshots.com/album/5824...ides&start=108

Basically it looks like we have at least 1 of every conceivable part to fit a 60-66 truck - I know there are 2 factory automatic columns, factory power steering and 4 near perfect hoods worth 200.00 each easy - there are doors fenders grilles - everything. I HIGHLY RECOMMEND if you are ANYWHERE near Alabama that you strongly consider driving in and looking at all this stuff and maybe taking a parts / project truck home with you too. I will post specific details on each truck in case someone wants to buy a parts truck - everything else is loose parts for sale. If you do not see it in my initial pics, I assure you we have it - inquire - Thank you guys and sorry for so many pictures but I had to show all the angles to each truck so there are a lot to look through.....thanks! GMCNUT and Sweptline

Hi,
I need a Mount for my wiper Motor like this. Do you have some one like this ???

Thank you verry much.

Greetings

Nils

Re: GIANT 60-66 parts Stash Barn Find!!

Hi and thank you in advance for fielding this. I am looking for what I believe is called a Parking brake cable clamp. It's bolted (two bolts) to the rear brake back plate were the parking brake cable goes into the back plate.