Re: 1 Owner 1976 SWB
I know you already know it but that truck is Beautiful,great thread,subscribed so I can go back and reference some of your info and pics for my build . Thanks Jratz
|
Re: 1 Owner 1976 SWB
3 Attachment(s)
Over the weekend I made some smooth panels to hide the factory holes on the inside of the fenders. Also it hides a wire loom on the drivers side as well...
Attachment 1361697 Attachment 1361698 Attachment 1361699 |
Re: 1 Owner 1976 SWB
Those look good. Really clean.
|
Re: 1 Owner 1976 SWB
Very clean and tidy
|
Re: 1 Owner 1976 SWB
Quote:
|
Re: 1 Owner 1976 SWB
Quote:
|
Re: 1 Owner 1976 SWB
nice, clean, and simple! it keeps getting better and better
|
Re: 1 Owner 1976 SWB
2 Attachment(s)
Thought I'd post some pics from the Starbird show this past weekend...
Here is meeting up for our move in time... Attachment 1368575 Attachment 1368576 |
Re: 1 Owner 1976 SWB
5 Attachment(s)
|
Re: 1 Owner 1976 SWB
2 Attachment(s)
|
Re: 1 Owner 1976 SWB
4 Attachment(s)
These were while playing around with the fisheye lens...
Attachment 1368584 Attachment 1368585 Attachment 1368586 Attachment 1368587 |
Re: 1 Owner 1976 SWB
Beautiful truck. That sure would look good in my garage.:metal:
|
Re: 1 Owner 1976 SWB
^^x2
|
Re: 1 Owner 1976 SWB
That truck is so beautiful! I love yours to N2TRUX..
|
Re: 1 Owner 1976 SWB
5 Attachment(s)
Some pics from the cruise night this week...
Attachment 1388607 Attachment 1388608 Attachment 1388609 Attachment 1388610 Tried to get a better shot of the hood liner installed... Attachment 1388611 |
Re: 1 Owner 1976 SWB
Awesome
|
Re: 1 Owner 1976 SWB
That thing is so sweet!
|
Re: 1 Owner 1976 SWB
.
. Amazing truck with such a great backstory! Awesome job with it! . . Quote:
. Any luck with getting the truck back to the location for new pics? . . |
Re: 1 Owner 1976 SWB
Quote:
|
Re: 1 Owner 1976 SWB
Beautiful truck, the subtle updates just keep making it better. Nice work and good luck on TOTM.
|
Re: 1 Owner 1976 SWB
3 Attachment(s)
Well I got the truck bagged this weekend...
This is the static suspension before the tear down after we got the bed off... Attachment 1396286 Attachment 1396287 Attachment 1396288 |
Re: 1 Owner 1976 SWB
3 Attachment(s)
Here is the tank, valve, relay, compressor, etc set up...
It is a 5 gallon tank & brackets from Accuair. A valve block assembly by AirLift & a Viair compressor. Theres a plate mounted in front of the tank for the valves, relay, power junction block, a common ground point, etc. Attachment 1396290 Attachment 1396291 Attachment 1396292 |
Re: 1 Owner 1976 SWB
3 Attachment(s)
The rear set up is done using Ekstensive's 2 link bars & upper bag brackets.
Then a Thorbeck Bros panhard bar. We mounted it in front of the rear end since the blazer gas tank left no room for it in the rear. Attachment 1396302 Attachment 1396303 The front is Ekstensive's kit. Attachment 1396304 |
Re: 1 Owner 1976 SWB
3 Attachment(s)
|
Re: 1 Owner 1976 SWB
4 Attachment(s)
Here is the finish product of a long weekend in the shop.
The bed floor is uncut & the truck still have the factory front inner fenders too. Thanks again Low1Ton & RedRat for all the help! Attachment 1396324 Attachment 1396325 Attachment 1396326 Attachment 1396327 |
All times are GMT -4. The time now is 08:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com