Re: The Snortin' bull
 

Thank you!

Re: The Snortin' bull
 

The weather has been real rainy,My garage is full and shop.No new recent work on the Bull .Photo op'

Re: The Snortin' bull
 

Been driving a lot almost 10k miles in the Bull now.The Seattle rain is non stop thought I would take advantage of it.Wet sanded the white today.Some 2000 and light soapy water.A year of non cleared base coat lookin good and old .

Re: The Snortin' bull
 

Check straps or door stops. Using the jeep one's to do the mod at Crown jeep parts. Look close at the boxes the factory number is on them. These fit the later trucks pretty easily. Though take a little work to fit to the 60-63.lOOK close the originals are split bracket to rubber stop. Original pins fit also.

Re: The Snortin' bull
 

The jeep door straps do take some work. Nothing major. the original holes in the door shell need to opened slightly. I used a RH angle drill with a step bit in thru the inside of the door shell.. The pivot bracket on the pillar is best I think to be split ( cut ) in half and than slightly thin down the jeep strap to fit better .

Re: The Snortin' bull
 

Left door check strap done using Jeep Cherokee parts.

Re: The Snortin' bull
 

Deluxe wheel. Got a new jem to control the Bull. In good shape. Needs cleaning and some repair and paint.

Re: The Snortin' bull
 

Very Nice!

Re: The Snortin' bull
 

The deluxe wheel was in fair shape though had about a 9" open wound on the bottom of the hoop.The inner steel hoop was exposed and rusted. Cleaned and prepped and then some PC7 and some curing by the fire some sanding and than some more of the same till like new. Well almost more to come.

Re: The Snortin' bull
 

[QUOTE=Palf70Step;8181317]Very Nice!]

Thank's Palf .These wheels are tough to come by .

Re: The Snortin' bull
 

Deluxe wheel 5 hours later. Out with the old in with the new. Refurbished and installed. Feeling like a Cadillac king in a GMC.What's better than that ?

Re: The Snortin' bull
 

:metal: Very N I C E :metal:

Re: The Snortin' bull
 

The Snortin' Bull and I didn't fall off the earth. Just been out driving and driving. Still got a list of things to finish. Just been having fun. Picture out back at work .

Re: The Snortin' bull
 

That is what we are supposed to do with them, DRIVE!

Re: The Snortin' bull
 

YUP.Y ou are right. From the start to the end .The trucks don't melt in the rain or with miles.

Re: The Snortin' bull
 

The Snortin' Bull got it's second passing safety award from the NSRA inpectors. all good except I still have not finished the park brake.

Re: The Snortin' bull
 

The Snortin' Bull . The snout truck's must of been a test of artistic design?

Re: The Snortin' bull
 

:metal:

Re: The Snortin' bull
 

I love the look of the two-tone GMC grill.

Re: The Snortin' bull
 

GMC grilles at that time had style.

Re: The Snortin' bull
 

Smelling raw gas all the time. Though I don't use the mustang tank sender it is the pickup tube for fuel. It start leaking. Had to drain tank and reset the seal and put a little fresh paint on tank.

Re: The Snortin' bull
 

I love the 'no bull' approach you have taken with the Bull. Just read your entire thread and enjoyed watching the Bull come to life. Keep up the good work.

Re: The Snortin' bull
 

:agree:

Re: The Snortin' bull
 

Thanks guys ,The no Bull is it. Try to save some $ here and there. And still have fun and $ for gas money. The Snortin Bull is thirsty.

Re: The Snortin' bull
 

Snortin' Bull made it out to it's third GOOD-GUYS pacific northwest show.Had a little friend with us also this time.