Re: New 64 Stepper Project
Nice bling......did that on mine also
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
Nice piece, well made.
|
Re: New 64 Stepper Project
So the B&M Differential Cover came with the wrong load bolts and no fill plug. Summit tried to get Holley to respond for the last week to no avail. So I bought a set and a fill plug from Summit, received them and attempted to install it. Didn't want to wait till June or...?
That didn't work because the 14 bolts (instead of 12) B&M sent with the kit I found were metric. Yep. So I called Summit and complained again. Only this time the guy I spoke to sent me new correct fastener for the cover on they're dime. This is the most expensive 12 bolt cover I have seen in my life in both time and parts to buy in order to install it. Still no word from Holley or B&M. Looks great and sealed tight as a drum but come on. I also installed the CPP deluxe (bent) panhard bar, no issues there. |
Re: New 64 Stepper Project
3 Attachment(s)
I forgot to post pics of it installed.
|
Re: New 64 Stepper Project
2 Attachment(s)
I changed my tail lights up a bit, used the same housing though.
|
Re: New 64 Stepper Project
I might have missed this - did you intentionally put the rear bumper on upside down? If so, do you have a picture of the whole back end like this so I can see if I want to as well?
|
Re: New 64 Stepper Project
I'd like to see it too.
|
Re: New 64 Stepper Project
I went back. Found pics I wanted here: http://67-72chevytrucks.com/vboard/s...666226&page=20
Thanks. |
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
Looks great
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
Do you have a photo of how your vintage air accessory brackets attach to the header bolts? I want to get that style of bracket but I don't think that they will work for me sense the first tubes on my headers go straight back instead of down.
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
1 Attachment(s)
Yes Saginaw Pump.
Part# 132R - A.C. 232L - Alt. 400L - P.S. http://www.alangrovecomponents.com/S...Short_Pump.htm You can shop around, eBay, Amazon etc for the best price I always do. Someone on here said they were afraid of their belt coming off. I've had my engine up to 5K RPM without issue. NASCAR up until last year used engine belts that were not serpentine and they take they're engines to extreme for hours and hours year in and tear out. As a set these Alan grove units line up perfectly. |
Re: New 64 Stepper Project
Thanks. Your awesome.
|
Re: New 64 Stepper Project
All the instructions for the brackets are at the bottom of this page, just find the bracket number and a PDF file will open with the instructions.
http://www.alangrovecomponents.com/Important_Info.htm They come with them in the box but just in case you want to be ready... |
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
I dont know that I did, there are sellers all over. I think I conducted a search on eBay and found the best price.
Or you can call them. |
Re: New 64 Stepper Project
got it thanks
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
Quote:
|
Re: New 64 Stepper Project
I forget how and when I did this but I like it. :)
https://www.holley.com/garage/view/1...et-c10-pickup/ |
Re: New 64 Stepper Project
Another one someone did - https://www.streetmusclemag.com/feat...-chevy-pickup/
|
Re: New 64 Stepper Project
Nice!
|
All times are GMT -4. The time now is 06:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com