The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 5 1 2 345
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OK OEM Style Rosette SS Rivets (https://67-72chevytrucks.com/vboard/showthread.php?t=442226)

HOTFUN 01-23-2011 11:43 AM
Re: OEM Style Rosette SS Rivets
 
Looks like you might want to take a week off and make some real cash money! I'll take 4. Plus another 4 for 8 total. Please PM if i miss a response for payment. Thanks, Mark

mcbassin 01-23-2011 12:29 PM
Re: OEM Style Rosette SS Rivets
 
Quote:
Originally Posted by 70LonghornCST (Post 4431571)
Is it $10 each rivit, or for a set? Interested in 4 to do a vin tag.
PM sent

Quote:
Originally Posted by Hart_Rod (Post 4431575)
+1
PM sent

Quote:
Originally Posted by otsenre (Post 4431581)
I need 4, how much??
PM sent
Quote:
Originally Posted by Livrat (Post 4431626)
I'll take 8
PM sent
Quote:
Originally Posted by matthew79 (Post 4431633)
I'll take 4. Thanks
PM sent
Quote:
Originally Posted by chevytruckluver (Post 4431640)
I may want 8
PM sent
Quote:
Originally Posted by silverado84355 (Post 4431648)
Put me in line for some
PM sent
Quote:
Originally Posted by 1949gmc (Post 4431658)
four rivets here, please.
PM sent



To all those who have request some I will try to take care of your in the order posted here. Hope to have an update this afternoon. thanks

matthew79 01-23-2011 12:32 PM
Re: OEM Style Rosette SS Rivets
 
I don't see my pm from you. Did you already send it?

Livrat 01-23-2011 12:33 PM
Re: OEM Style Rosette SS Rivets
 
Paypal sent.. Thanks!!

72BlckButy 01-23-2011 12:39 PM
Re: OEM Style Rosette SS Rivets
 
Question... were exactly are the rosette rivets used? Only the VIN tag? What about the door plates?

Will you only need 4 regardless of a blazer, truck or burb?

Sorry guys.... never paid any attention to this. :)

Interested in a complete set even though this run it obviously sold out if everyone follows through.

72longbed 01-23-2011 12:44 PM
Re: OEM Style Rosette SS Rivets
 
Put me in there for 4 when you do another run of them please.

Hope you decide to make more. Great idea!

72longbed

teeitup 01-23-2011 01:00 PM
Re: OEM Style Rosette SS Rivets
 
These look good, the ones another member sold previously on here looked to be aluminum or something close to that. Good job, I think these would pass inspections all over the country. I don't need any but if I did your the man!!!!!
Nate, only on vin tags, blazer, trucks and burbs all the same.

72BlckButy 01-23-2011 01:05 PM
Re: OEM Style Rosette SS Rivets
 
Quote:
Originally Posted by teeitup (Post 4432207)
These look good, the ones another member sold previously on here looked to be aluminum or something close to that. Good job, I think these would pass inspections all over the country. I don't need any but if I did your the man!!!!!
Nate, only on vin tags, blazer, trucks and burbs all the same.
Thanks Randy.

matthew79 01-23-2011 01:18 PM
Re: OEM Style Rosette SS Rivets
 
payment sent! Thanks!

tjsblazer 01-23-2011 01:43 PM
Re: OEM Style Rosette SS Rivets
 
Well put me in line for eight. Hope you do another run if it doesn't get this far.
Posted via Mobile Device

mo 01-23-2011 02:22 PM
Re: OEM Style Rosette SS Rivets
 
If you make more, please add me to the list and I'll take 4.
hope you get around to it.
thanks,
Mo

70LonghornCST 01-23-2011 02:59 PM
Re: OEM Style Rosette SS Rivets
 
Paypal payment sent. Thanks!

weircc 01-23-2011 03:13 PM
Re: OEM Style Rosette SS Rivets
 
me too

silverado84355 01-23-2011 06:24 PM
Re: OEM Style Rosette SS Rivets
 
PM sent

2000tj 01-23-2011 07:01 PM
Re: OEM Style Rosette SS Rivets
 
I will take 4 if you do make more.
Posted via Mobile Device

mahanian 01-23-2011 07:25 PM
Re: OEM Style Rosette SS Rivets
 
I just bought 8 off a guy on ebay who makes stainless steel ones as well, but I need 4 more and would much rather support a fellow board member so if you decide to make some more please put me in line! :metal:

rob32472 01-23-2011 07:35 PM
Re: OEM Style Rosette SS Rivets
 
I would like four as well......

dozerman 01-23-2011 07:38 PM
Re: OEM Style Rosette SS Rivets
 
I take 8 or 12 if poss.

Southern C10 01-23-2011 08:03 PM
Re: OEM Style Rosette SS Rivets
 
I'll take 4.

72 tigger 01-23-2011 08:32 PM
Re: OEM Style Rosette SS Rivets
 
If you make more I'll take (4) Thanks!

Vintage Windmills 01-23-2011 08:34 PM
Re: OEM Style Rosette SS Rivets
 
I will also take 4 if you make more.

tex_waco_usmc 01-23-2011 09:15 PM
Re: OEM Style Rosette SS Rivets
 
If you make some more I will take 8. Let me know...

GobbleStalker 01-23-2011 09:27 PM
Re: OEM Style Rosette SS Rivets
 
8 here please.

Number98 01-23-2011 09:28 PM
Re: OEM Style Rosette SS Rivets
 
I sent a pm about getting some, should you decide to make another batch....

oldblue1968chevy 01-23-2011 09:59 PM
Re: OEM Style Rosette SS Rivets
 
How many are needed for 1 c10 pickup?


All times are GMT -4. The time now is 07:20 PM.
Page 2 of 5 1 2 345
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com