![]() |
Re: Sneak Peak....
Quote:
Rob has some crazy consulting fees.... so fortunately we were able to handle this one on our own! We had the "Touring" version's geometry all dialed in for quite some time before we released it over a year ago. Thanks for checkin' though! This is just a redesign of the main crossmember assembly. Main adavantages are rigidity and its modular design. |
Re: Sneak Peak....
Ah see I never been really up to date on your products. So I'm sure the increased rigidity will help our redvines soft frames quite a bit. How much lighter do you say this is over a stock crossmember
Posted via Mobile Device |
Re: Sneak Peak....
Quote:
Quote:
This new version weighs one pound heavier than the tubular one. I will get some more numbers and post them up again when I have some more time. |
Re: Sneak Peak....
Sounds good. Seems like a lot of weight is in the stock cross shaft and arms.
Posted via Mobile Device |
Re: Sneak Peak....
Great looking product! You guys rock as usual!
I like the 'chop member" Posted via Mobile Device |
Re: Sneak Peak....
Quote:
October modmember special anyone? :lol: Now that I've started with the double meanings, "chopmember" puts me in the wrong state of mind. :exit: |
Re: Sneak Peak....
Nate, with there be a cost difference between the V3 and the Slice-o-matic slicer version? Or will either design be an option?
|
Re: Sneak Peak....
wonder what a dropmember will look like once im able to afford one lol
|
Re: Sneak Peak....
I dig it!! Looks like a space age version!
Posted via Mobile Device |
Re: Sneak Peak....
When is this going to be ready, MIGHT wanna pull the trigger on one in a few more weeks or so? Thanks
Posted via Mobile Device |
Re: Sneak Peak....
Quote:
Posted via Mobile Device |
Re: Sneak Peak....
Sweet, may be giving you a call for it in a couple weeks or so :)
Oh! Whats the build time on these? Thanks Posted via Mobile Device |
Re: Sneak Peak....
Quote:
|
Re: Sneak Peak....
Version 4 looks great Nate. Looks to be a lot simpler from a manufacturing point, lasered & braked plate with straight tube.
Do the original control arms bolt right up? Keep up the great work, now get back to work on the rear sway bar concept.....lol See you at Goodguy's Posted via Mobile Device |
Re: Sneak Peak....
Nate, do you accept trade-in's? :lol: jk My wife would probably leave me. L
Looks tight! |
Re: Sneak Peak....
Quote:
I would feel terrible if I was the cause of divorce. :( |
Re: Sneak Peak....
Whats the build to ship time on one of these, and a set of hinges Nate? Thank
Posted via Mobile Device |
Re: Sneak Peak....
Quote:
|
Re: Sneak Peak....
Ok sweet. That should be right about the time im HOPEFULLY ready to pull the trigger and whip out the bank card lmao. I will get ahold of YOU directly when im ready as their is some things i will need to ask ;)
Posted via Mobile Device |
Re: Sneak Peak....
Is this going to be available in the touring edition. I want to lower my suburban i just purchased and i want to hammer it static.
|
Re: Sneak Peak....
Quote:
Posted via Mobile Device |
Re: Sneak Peak....
i have a dropmember currently in my 68, which model dropmember would be best for a static drop for a really low ride height. I recall a blazer that was done with one of your dropmembers that had a low ride height.
|
Re: Sneak Peak....
We go over pricing yet?
Posted via Mobile Device |
Re: Sneak Peak....
Quote:
Posted via Mobile Device |
Re: Sneak Peak....
Very impressive, Nate. I love that you keep developing products for these trucks.
Quality and customer service second to none. |
All times are GMT -4. The time now is 01:51 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com