|
Re: My 52 GMC Build
2 Attachment(s)
Got the air bags mounted today. The truck now can go up and down and roll on 4 wheels umm I mean 6 wheels :bann:
I'll get a vid soon Attachment 1335106 Attachment 1335107 |
Re: My 52 GMC Build
Looks very nice!
|
Re: My 52 GMC Build
Quote:
Quote:
|
Re: My 52 GMC Build
What a cool build. I own an AD and a '94 factory turbo IDI crew cab dually. My F-350 has a 90cc injection pump, BB code injectors, waste gate adjusted for 15psi(on the stock head bolts and 216,000 mile head gaskets), Hypermax cowl induction with a K&N air filter, Banks down pipe/EGT+boost gauges and 4" straight pipe side exhaust.
What turbo is that? What other mods got done to the E4OD? Whats plans do you have for fueling? A cam swap would be real easy right now.....google R&D IDI Performance. |
Re: My 52 GMC Build
1 Attachment(s)
Got the frame and axle painted. Starting to look like a truck :)
Attachment 1337735 Thanks Wide load c-30. Its a HX35 from a cummins. I found its a good size for what I'm doing. I'm running 3" mandrel bent sst out the side. I have an electric 35 gph fuel pump. Other than that I'm just turning up the lift pump. For the trans I put in a Transgo tugger kit. It was rebuilt about a year before I got it. I'm also using a US Shift Quick 1 controller that allows me to control anything the trans can do. Its going to be manual shift auto. I've looked into a cam but I want to see what the stock set up will give me first. My goal is 300hp and 500lb-ft if I get close to that I'll be happy, but who knows down the road I may do a full motor build. |
Re: My 52 GMC Build
1 Attachment(s)
Amazingly my steering shaft missed the motor without any major mods. I moved the end if steering column over to the drivers door 1.5" and am going to center the column between the gauges.
Attachment 1339664 |
Re: My 52 GMC Build
Finally got a vid put together, showing what I have done so far and motor running. Enjoy
http://youtu.be/N0C3SOCJPCA |
Re: My 52 GMC Build
very nice work so far -- it should be a awsome ride when done !
|
Re: My 52 GMC Build
Great work! The engine really sounds nice and it looks way easier to work on than any other turbo'd IDI! :lol:
|
Re: My 52 GMC Build
I like it if I had the money I would go diesel as well
|
Re: My 52 GMC Build
2 Attachment(s)
Got steering column mounted just before Christmas.
Attachment 1345467 Attachment 1345468 Working on putting the lower cowl back on and then on to fenders, but its slow going right now really cold here 10F feels like -6F not much heat in garage. A bit warmer next week. |
Re: My 52 GMC Build
Quote:
|
Re: My 52 GMC Build
3 Attachment(s)
Well got the one cowl tacked on. Then got the fender modified. I cut 3" off the bottom because I'm rising the running boards and first test fit. WOW haven't seen the fender in it in about 8 years.
Attachment 1349017 Attachment 1349018 Attachment 1349019 |
Re: My 52 GMC Build
Cool build!!
|
Re: My 52 GMC Build
Dope
|
Re: My 52 GMC Build
Definitely a cool, original build! I'm in!
|
Re: My 52 GMC Build
1 Attachment(s)
Got front end bolted together for the first time in about 9 years. I'll Have some more pics in a few days.
Attachment 1351904 |
Re: My 52 GMC Build
Great job. The truck is looking pretty cool. I can't wait to see some future picture... Keep them coming!!!
|
Re: My 52 GMC Build
5 Attachment(s)
More pics all the parts are fitting together really well!!
Attachment 1352209 Attachment 1352210 Attachment 1352211 I had to trim a hole into the inner fender to fit the power steering pump. Made it just big enough to fit, I'm thinking I'll cut it bigger and make a cover on the inside Attachment 1352212 Now I'm working on a frame cross member to hold the grill. It's just kind of in place now. Attachment 1352213 I also figured out how big and where the rad is going. Looks like in front of rad support and will go down between frame rails. Then the inter cooler will go in front of that just behind the grill. |
Re: My 52 GMC Build
It's coming together nicely.
|
Re: My 52 GMC Build
Thanks everyone. I'm glad you all like what I have done so far.
|
Re: My 52 GMC Build
2 Attachment(s)
So here is the front frame horns cut off ready for the cross member.Attachment 1353438
This is the cross member I made. It's 2X4 1/8" wall, then the grill will bolt on top of the lower part and bumper to the sides of that. Attachment 1353439 |
Re: My 52 GMC Build
3 Attachment(s)
Here is the grill bolted on. Still have to do some front end adjustments to fix the grill gap.
Attachment 1353446 Attachment 1353447 I bolted on the visor so I can get a good look at it with all the parts on. Attachment 1353448 Looks so sweet :metal: |
Re: My 52 GMC Build
2 Attachment(s)
|
Re: My 52 GMC Build
2 Attachment(s)
Made some brackets to mount the bumper. I wanted it tucked in a bit from stock and on the ground.
Attachment 1355091 Still have to put the splash apron on Attachment 1355092 |
| All times are GMT -4. The time now is 05:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com