The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 69 1 2 345671252 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   Hazel the older Sister.... (https://67-72chevytrucks.com/vboard/showthread.php?t=351837)

*Dylan 07-06-2009 10:28 PM
Re: Hazel the older Sister....
 
Signing on!

PBFAB.COM 07-07-2009 12:31 AM
Re: Hazel the older Sister....
 
It's been a whole day, and TWO pages of posts... where's all the progress pics?!:lol:

I don't know if spindles and bags will get that thing low enough?:ito:

n2billet 07-07-2009 05:31 AM
Re: Hazel the older Sister....
 
Quote:
Originally Posted by porterbuilt (Post 3398983)
It's been a whole day, and TWO pages of posts... where's all the progress pics?!:lol:

I don't know if spindles and bags will get that thing low enough?:ito:
In order to make progress some planning is in order ;) I'm going to pull all of the suspension and brakes off this weekend.

Spindles and bags will have to do because I'm not going any lower with this one.......yet :lol:

nuke1 07-07-2009 06:25 AM
Re: Hazel the older Sister....
 
very nice find. how about some pics of the dents? how bad are they.

n2billet 07-07-2009 08:06 AM
Re: Hazel the older Sister....
 
Quote:
Originally Posted by nuke1 (Post 3399111)
very nice find. how about some pics of the dents? how bad are they.
I'll post them when I start pulling them out and bodyworking them....

rustSpot 07-07-2009 11:18 AM
Re: Hazel the older Sister....
 
Dropped by to see Keith and his new find yesterday. This truck is nice! The plans are gonna make it a kickass truck tho in it's current state..it's already cool!

aggie91 07-07-2009 02:28 PM
Re: Hazel the older Sister....
 
I got to watch this one. I wish I could find a nice truck like that...

gcburdic 07-07-2009 04:01 PM
Re: Hazel the older Sister....
 
subscribed....look forward to watching this one!!!

n2billet 07-07-2009 10:16 PM
Re: Hazel the older Sister....
 
1 Attachment(s)
It looks a little like a early 90's Chevy truck teal color.....

n2billet 07-11-2009 06:38 PM
Re: Hazel the older Sister....
 
4 Attachment(s)
pics

N2TRUX 07-11-2009 06:49 PM
Re: Hazel the older Sister....
 
Dude you weren't kidding when you said the frame was immaculate. That looks as clean as my late model truck. I don't think there is enough rust on it for POR-15 to bite. I would consider Eastwoods "Chassis Black" ...:metal:

Hart_Rod 07-11-2009 06:56 PM
Re: Hazel the older Sister....
 
Quote:
Originally Posted by n2billet (Post 3406998)
Worked on the truck today (it has hot!) and got all the stuff pulled from donor truck and all the suspension pulled from the 67. I'm now ready to start putting it back together but would like to paint the frame before doing so...I usually blast the frame and then primer and paint but I'm afraid I might get carried away and go to far on this project so I would like to keep it simple ;) Does anyone have any suggestions? I was thinking Por15? what do you guys think?

The one picture is what I found when I pulled the door panel......it looks like a skeleton of a small snake!
Rattle-can that baby! :D

n2billet 07-11-2009 07:23 PM
Re: Hazel the older Sister....
 
Quote:
Originally Posted by Hart_Rod (Post 3407032)
Rattle-can that baby! :D
Are you sure? I was going to PM you about your 50th frame and what you did.....so you guys think just scuff and shoot?

N2TRUX 07-11-2009 07:43 PM
Re: Hazel the older Sister....
 
Look at how little damage the Texas weather has done to it. Almost like a new frame, and it wasn't treated to any special coating.

Knowing that it will remain indoors, and get driven on nice days makes me think that a good durable chassis paint will hold up just fine.

timzrides 07-11-2009 07:56 PM
Re: Hazel the older Sister....
 
i'm very surprised by rustoleum hammered paint. i just took my electic grinder with the wire wheel, clean and brushed painted it on. very surprised, just painted my last frame a few months ago with por 15 but i would hesitate a moment with using this rustoleum again. i picked black but it comes out a bit grayish. very satisfied for a driver frame. 10 dollars a quart....

aggie91 07-11-2009 08:03 PM
Re: Hazel the older Sister....
 
I agree, just do a scuff and shoot with Chassis Black or even a semi-gloss rustoleum rattle can black.

Are you going to pull the bed and front clip before painting the frame? I would almost not mess with that much as that could get you carried from you simple plan....

STP67-72 07-11-2009 10:28 PM
Re: Hazel the older Sister....
 
Hey Kieth truck looks good. Ken is probably correct on the POR 15. It likes to stick to rust. I have rattle canned a lot of them. I have not ever used Eastwood black. But have used alot of there other spray paints. I have used alot of black paint from Tractor Supply. 2 part epoxy tractor paint. What ever you use i know it will turn out great. Keep us updated.

FRENCHBLUE72 07-12-2009 09:22 AM
Re: Hazel the older Sister....
 
Nice score....

bagged74 07-14-2009 01:30 AM
Re: Hazel the older Sister....
 
Keith,
Have I told you lately that I hate you???

bagged74 07-14-2009 01:33 AM
Re: Hazel the older Sister....
 
Quote:
Originally Posted by STP67-72 (Post 3407370)
. I have used alot of black paint from Tractor Supply. 2 part epoxy tractor paint. . Keep us updated.
+1 for the tractor paint. it works good

STP67-72 07-14-2009 07:06 AM
Re: Hazel the older Sister....
 
Several people ask me if the frame had been powder coated when i was building the frame.I might be able to dig up some pictures.

STOCKISH 07-14-2009 07:24 AM
Re: Hazel the older Sister....
 
That's one awesome find. Going to be another killer ride. Cant wait to see more pics.

98L150 07-16-2009 09:18 AM
Re: Hazel the older Sister....
 
cool project keith cant wait to see more on this one

n2billet 07-18-2009 04:40 PM
Re: Hazel the older Sister....
 
2 Attachment(s)
pics

Hart_Rod 07-18-2009 05:07 PM
Re: Hazel the older Sister....
 
Daaayummmmm Keith! That's gonna be sweet. Hopefully you will have it finished when I come to Dallas Labor Day weekend. I really want to come check it out.


All times are GMT -4. The time now is 10:34 AM.
Page 2 of 69 1 2 345671252 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com