![]() |
Re: 69/70 4wd gmc jimmy parts f/s
http://img.photobucket.com/albums/v3...h/100_3809.jpg
this looks like some kind of gas can holder. |
Re: 69/70 4wd gmc jimmy parts f/s
riddla can you post a pic. of where they need cut. how much and so on. i think i have the tail light and reverce housings sold.
|
Re: 69/70 4wd gmc jimmy parts f/s
http://img.photobucket.com/albums/v3.../DSCF06021.jpg
critter is the part i put a red line around what you need? |
Re: 69/70 4wd gmc jimmy parts f/s
I can get you a pic but not till sunday or so, work gots me workin full days.
I would say from the rear marker light back both sides. My taillights are pushed in bad tryin to save the old gmc They dont need to be great. |
Re: 69/70 4wd gmc jimmy parts f/s
do you need to start at rear of marker light or do you need marker lights included.
|
Re: 69/70 4wd gmc jimmy parts f/s
Quote:
|
Re: 69/70 4wd gmc jimmy parts f/s
RIDDLA if both sides are they look good from the rear both sides cut off and shipped to you for $125.00. let me know if you are interested .
critter i will check on the piece you need. |
Re: 69/70 4wd gmc jimmy parts f/s
done and done bill will take from the front of the marker light
|
Re: 69/70 4wd gmc jimmy parts f/s
Is the roll bar spoken for? I am @ 23480
|
Re: 69/70 4wd gmc jimmy parts f/s
jmac11 has ask about it you are 2nd on the roll bar.
|
Re: 69/70 4wd gmc jimmy parts f/s
COOL thank you
|
Re: 69/70 4wd gmc jimmy parts f/s
i got some stuff off today but my camera is broke right now.
RIDDLA got your parts off pm sent. critter lower half has rust let me know if you need some of the upper half. CORSAIR wheels were odd balls. jimer1964 transfercase shifter was nicer than i thought . it's in good driver shape boot has small cut next to shifter $100.00 shifter,boot,knob ring was not there. gas tank spout good driver shape $40.00 shipped. rad. metel hose piece fair driver shape $30.00 shipped. trans.cover good driver shape $45.00 shipped. tail gate henge set 4 pieces $25.00 shipped. i will post pic.s when ever i get my camera fixed. |
Re: 69/70 4wd gmc jimmy parts f/s
Quote:
|
Re: 69/70 4wd gmc jimmy parts f/s
Does it have the factory hardware to hold the rear panels on? If so, I'd like it.
Also all the tailgate hardware inside the gate including the handle and rods....and all the hardware on the truck Door guts if useable? (door latches, window channels, regulators, lock hardware/rods) And any of the brackets to mount the top or the piece that goes on top of the door at the vent window.... And the cover for the gas fill tube if still there (behind the panels) Price for all shipped to 23112? |
Re: 69/70 4wd gmc jimmy parts f/s
Let Asea have it Bill..... transport near about impossible.
|
Re: 69/70 4wd gmc jimmy parts f/s
How rusty is the bed floor? I am looking for a few patch panels around the rear wheel wells! Thanks
Posted via Mobile Device |
Re: 69/70 4wd gmc jimmy parts f/s
Critter sorry i couldnt help you butthat part you need is soft and i don't think it would help.
VA72C10 i think i took some of the brackets that holds the inner trim/panels in place today there were 4 two on each of the rear stake pockets. there is some more things like that about 1/2 the inner bed sides.i have never took a tail gate apart i will see what i can do.door tops are gone filler tube cover was gone also.i will get back with you on the other parts sometime this week. thanks jmac11 for responding. k5blazin can you post a pic. or 2 of where you need? |
Re: 69/70 4wd gmc jimmy parts f/s
ASEASIDER it's your turn on the roll bar.
|
Re: 69/70 4wd gmc jimmy parts f/s
2 Attachment(s)
here are the areas i need.... thanks
|
Re: 69/70 4wd gmc jimmy parts f/s
1 Attachment(s)
third pic!
|
Re: 69/70 4wd gmc jimmy parts f/s
Clarify windshield - - glass is fogged? gasket is bad? $50? I need a good glass. I'll drive over there if it's good.
|
Re: 69/70 4wd gmc jimmy parts f/s
PM sent
|
Re: 69/70 4wd gmc jimmy parts f/s
4oldcars windshield has fog/smoke around edeges no breaks would only be good for a farm truck. rubber gasket it cut . chrome/trim is good driver shape.you should be able to get a new windshield for around $200.00.
k5blazin could you get by with about any piece of the bed floor ? a piece about 18" by 12" or 24" by 12" piece. ASEASIDER pm returned. |
Re: 69/70 4wd gmc jimmy parts f/s
[QUOTE=billsbowtie;4483897]4oldcars windshield has fog/smoke around edeges no breaks would only be good for a farm truck. rubber gasket it cut . chrome/trim is good driver shape.you should be able to get a new windshield for around $200.00.
k5blazin could you get by with about any piece of the bed floor ? a piece about 18" by 12" or 24" by 12" piece. ASEASIDER pm returned.[/ Really looking for those areas due to the smaller rib closest to the bedsides. Thanks Posted via Mobile Device |
Re: 69/70 4wd gmc jimmy parts f/s
k5blazin those rear pieces next to tail light i cut out for RIDDLA he got some of the bed floor with the pieces he needed. when/if i can get my camera to download pics. i will post some of whats left of bed floor.
|
All times are GMT -4. The time now is 03:27 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com