The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   New Steelies, New Look (https://67-72chevytrucks.com/vboard/showthread.php?t=525261)

jocko 05-19-2012 03:00 PM

Re: New Steelies, New Look
 
i like your plan hoodlum. i would prefer a return to stock front rather than a lowered rear to level this thing. white steelies are awesome and a variety of caps is something you'll enjoy. they can get expensive!!

oldblue1968chevy 05-19-2012 03:24 PM

Re: New Steelies, New Look
 
Lil hoodlum, I always liked this truck minus the wheels. Looks great. If you wanted to lower the rear I think no more than a 2" block would be needed.

Is it stock suspension now? Nice truck.

Btw Im in N TX at tech school, any car shows in whitchita falls this summer?

lil hoodlum 05-19-2012 06:50 PM

Re: New Steelies, New Look
 
Quote:

Originally Posted by oldblue1968chevy (Post 5389203)
Lil hoodlum, I always liked this truck minus the wheels. Looks great. If you wanted to lower the rear I think no more than a 2" block would be needed.

Is it stock suspension now? Nice truck.

Btw Im in N TX at tech school, any car shows in whitchita falls this summer?

Hey John, good to hear from you. I'm glad to know you survived basic training. I'm sure you are glad that part is over with. My dad was in the Air Force and he did his basic training in San Antonio as well. He learned to eat his food in 15 minutes or less. If you didn't finish quick enough you would go hungry. LOL.

Right now my truck has disk brakes up front with stock height aftermarket spindels. I put in 2" drop springs up front. Rear is stock height.

The only thing I could find out about car shows for Witchita Falls this is summer is: http://hotrodhappenings.com/NewTexas...mmerofFun.html

There is also a "Hotter than He!!" bike/run event in August I believe. Not sure if there would be any kind of car event stuff.

Keith

Pro/StreetPete 05-19-2012 06:56 PM

Re: New Steelies, New Look
 
I say drop the back end a couple inches "I like a small rake also" and drive it ......... !:c2:

50bomb 05-20-2012 01:57 PM

Re: New Steelies, New Look
 
I like the steelies. I have white steelies on my truck too. I like the stance on your truck. As far as lowering it, I think that looks good the way it is. Everyone has their own taste. I always like that wicked raked look. Gives it that hot rod/muscle feel.

502ms 05-20-2012 02:55 PM

Re: New Steelies, New Look
 
I like rake, but bring it in proportion.
Also, love the wheels/paint combo
Posted via Mobile Device

Grande Rojo 05-20-2012 03:57 PM

Re: New Steelies, New Look
 
1 Attachment(s)
Here's a picture of my spare i just mounted in the bed..its a 15x6 wheel vintiques with bullet lugs and bullet center cap. Yes, I still need a tire.

lil hoodlum 05-20-2012 04:24 PM

Re: New Steelies, New Look
 
Quote:

Originally Posted by Grande Rojo (Post 5390882)
Here's a picture of my spare i just mounted in the bed..its a 15x6 wheel vintiques with bullet lugs and bullet center cap. Yes, I still need a tire.

Grande Rojo do the bullet center caps just push on from outside the wheel. Is it a nice tight fit, in other words, does it seem likely they might fall off easily?

That is the look that I would really love to have. I think it looks great. Thanks for the picture.

Keith

Grande Rojo 05-20-2012 05:04 PM

Re: New Steelies, New Look
 
Quote:

Originally Posted by lil hoodlum (Post 5390914)
Grande Rojo do the bullet center caps just push on from outside the wheel. Is it a nice tight fit, in other words, does it seem likely they might fall off easily?

That is the look that I would really love to have. I think it looks great. Thanks for the picture.

Keith

It's a push through and fits tight. Fits the 6 lug Wheelvintiques perfect. Got the wheels and cap from summit racing and the lug nuts from lugnutkings

lil hoodlum 05-20-2012 05:29 PM

Re: New Steelies, New Look
 
3 Attachment(s)
Quote:

Originally Posted by Grande Rojo (Post 5390953)
It's a push through and fits tight. Fits the 6 lug Wheelvintiques perfect. Got the wheels and cap from summit racing and the lug nuts from lugnutkings

Thanks for the info. Your wheel looks great.

I don't think the push through will work for me. There is like zero clearence for the rear wheels because of the axel flange.

Keith

lil hoodlum 05-20-2012 05:41 PM

Re: New Steelies, New Look
 
1 Attachment(s)
The ones from LugNutKing are for 3.75" outer diameter. I believe these are "push on". I measured mine before powder coating and that is the correct outer diameter.

Thanks for the info.

Keith

Boog 05-20-2012 05:44 PM

Re: New Steelies, New Look
 
1 Attachment(s)
Have you thought about a Spider setup like this? Off hand I don't remember who sells them but I bet a quick search will find em. Yes, I know this is a 5 lug setup. They may be available in 6 lug though.

lil hoodlum 05-20-2012 06:06 PM

Re: New Steelies, New Look
 
Quote:

Originally Posted by Boog (Post 5391009)
Have you thought about a Spider setup like this? Off hand I don't remember who sells them but I bet a quick search will find em. Yes, I know this is a 5 lug setup. They may be available in 6 lug though.

Thanks Boog. My interweb searches did not come up with any 6 lug set ups for the spider caps. Thats what I was iniatially interested in but couldn't find any. So the next best choice was the bullet cones and bullet lug nuts.

Keith

Boog 05-20-2012 06:58 PM

Re: New Steelies, New Look
 
I saw on a thread about the same thing on the 60-66 forum Lug Nut King on ebay sells them. Worth lookin.

72 Super 05-20-2012 07:14 PM

Re: New Steelies, New Look
 
Keith,

I like steel wheels on your truck. I think the caps would set them off too!

Ray

jchav62 05-21-2012 10:32 AM

Re: New Steelies, New Look
 
2 Attachment(s)
I dig the steelies! I'm a fan of both, with and without caps. I have 15x8 steelies on the '67... currently with bowtie moon caps and rings. The second set is what I ran at first for a short time... 69-up caps which can be found on the parts board now. :)

sir_talk_alot 08-17-2012 12:17 AM

Re: New Steelies, New Look
 
Quote:

Originally Posted by Hubscrub (Post 5388734)
looks great to me steelies are always cool bare or with caps not like any aftermarket wheel:metal: reminds me of one of my favorite trucks on this site this one

where could those babymoons be found for the steelies with nubs?

midniteblues 08-17-2012 12:24 AM

Re: New Steelies, New Look
 
I must say the lugnut king has some quality lugnuts imo. they are not like the expensive/cheapys in the auto stores.

70cst 08-17-2012 07:32 AM

Re: New Steelies, New Look
 
:agree: that the Steelies are way :c2:

jhwkns 08-17-2012 10:18 AM

Re: New Steelies, New Look
 
Quote:

Originally Posted by sir_talk_alot (Post 5543133)
where could those babymoons be found for the steelies with nubs?

JC Whitney has them for about $60 a set

Billett 08-17-2012 10:48 AM

Re: New Steelies, New Look
 
Keith, any info on whether or not those bullet center caps worked? I already have bullet lug nuts but the push through caps would be perfect for me. I have the same problem with the rear axle flange though.

FRENCHBLUE72 08-17-2012 12:14 PM

Re: New Steelies, New Look
 
I like the new look..

Notso 08-21-2012 05:35 PM

Re: New Steelies, New Look
 
I am just starting my project with a 67 SWB fleet and I think the 15" steel rim is the way to go. I love the lowered trucks, and plan to go with a Porterbuilt coil over but I think I'm over the 22" look.

benbloom 05-03-2016 05:19 AM

Re: New Steelies, New Look
 
Quote:

Originally Posted by shawno72 (Post 5388020)
Here is mine with the COPO caps
Attachment 928505

what Wheels do those caps fit onto? are they just the stock steelies from these trucks? or do you have to get a car wheel

sambrutay 05-03-2016 07:36 AM

Re: New Steelies, New Look
 
No rings please.


All times are GMT -4. The time now is 02:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com