The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - KS Parting 67 GMC CST V6 (https://67-72chevytrucks.com/vboard/showthread.php?t=596702)

Re: Parting 67 GMC CST V6

I need the door panels, a choke knob, cig lighter, and the seat belts if available.

Re: Parting 67 GMC CST V6

Quote:

Originally Posted by duallyjams (Post 6269290)

interested in the air cleaner, ignition switch with key plus does the key match the doors locks, tail gate

I'm not sure if all keys match. I didn't check to see if they all woork. I have ign and door locks. Ill answer in the am. I'm at mandatory shopping with the wife tonight. Lol
Posted via Mobile Device

Re: Parting 67 GMC CST V6

Price on the radio and the choke stuff minus the knob someone asked for it already. Just need the cable and assembly to the carb. Thanks
Posted via Mobile Device

Re: Parting 67 GMC CST V6

I am interested in body side molding, radiator core support and tailgate. What is condition?

Re: Parting 67 GMC CST V6

I may have to pass on the dash pad but do you have more pictures of the steering wheel? How much to ship?
Posted via Mobile Device

Re: Parting 67 GMC CST V6

Quote:

Originally Posted by duallyjams (Post 6269290)

interested in the air cleaner, ignition switch with key plus does the key match the doors locks, tail gate

Duallyjams:
$35 for the air cleaner and $20 for the locks and ignition once I make sure they all work! I'll cover anything over $15 shipping. $70 total shipped!

Quote:

Originally Posted by Tim Christian (Post 6269359)

Does that include hinge, stop arm, Button and hardware? Also how much for radio with knobs/mounting hardware?

Tim Christian:
$40 for all of the GBD items. $50 for the radio and all hardware. I'll ship it all in a box safely packaged for shipping costs.

Quote:

Originally Posted by 67ctener (Post 6269387)

How much for radio if still available? Thanks
Posted via Mobile Device

67ctener:
You are second on the radio.

Quote:

Originally Posted by badazmalibu (Post 6269393)

I am willing to purchase all of the side trim if we can agree on a price and you are willing to ship it

$150 on all the trim after you get better pictures of all trim. I'll charge what shipping cost ends up being.

Quote:

Originally Posted by 75gmc454 (Post 6269427)

I need the door panels, a choke knob, cig lighter, and the seat belts if available.

75GMC454:
Drivers panel is lifting a little pass is great just dirty $50, choke items $30, cig lighter $10, seat belts are all there and retractors work $75. I'll get some pics tomorrow.

Quote:

Originally Posted by rockc (Post 6269522)

I am interested in body side molding, radiator core support and tailgate. What is condition?

Rockc:
I'll get some better pics tomorrow of the trim. Core support is rust free so it's $125. I get better pics of the tailgate tomorrow and price it accordingly.

Quote:

Originally Posted by kingsolver72 (Post 6269558)

I may have to pass on the dash pad but do you have more pictures of the steering wheel? How much to ship?
Posted via Mobile Device

Kingssolver:
Understood on the dash pad. Was it overpriced? I'll charge what they charge me on the steering wheel as I have tons of peanuts and foam to pack it.
Mike
Posted via Mobile Device

Re: Parting 67 GMC CST V6

Ok thanks for the reply. Shoot a few pics tomorrow and I will talk with you then.

Re: Parting 67 GMC CST V6

Is thr right fender good? Would you ship Greyhound? Thanks

John

Re: Parting 67 GMC CST V6

I'll take the air cleaner.
I'll take what ever the key works.
I also asked about the tail gate in post 22 I believe I was first.

Re: Parting 67 GMC CST V6

i'm intrested in the heater controls if its in nice shape. i dont really need the cables.

is there any pitting on the chrome?(what little you see of it)
are any of the levers broke?(hard too see)
are the rivits holding the mech to the face plate tight?.
do you know if the fan switch works?

Re: Parting 67 GMC CST V6

I'm gonna pass on the harness. Thanks anyway.

Re: Parting 67 GMC CST V6

$150 on all the trim after you get better pictures of all trim. I'll charge what shipping cost ends up being.

sounds good! send the pics and a PM and I can pay via Paypal Thanks,Brett

Re: Parting 67 GMC CST V6

Hey Mike, heres a bump for ya. Just a little reminder, if ever decide you want let go of that seat, lmk. Lol. Good luck with sale.
Posted via Mobile Device

Re: Parting 67 GMC CST V6

ill get in line for the steering wheel and the cap also, also whats the going rate for the tail gate?

Re: Parting 67 GMC CST V6

Mike I gonna pass on the fender badges. Thank you
Posted via Mobile Device

Re: Parting 67 GMC CST V6

Mike, can you get some good pics of the rear bumper. Thanks Trevor
Posted via Mobile Device

Re: Parting 67 GMC CST V6

Quote:

Originally Posted by gdavis (Post 6269129)

how about horns did it have any. both horns and harness to 34446

GDavis,
Single horn sorry!

Quote:

Originally Posted by 67ctener (Post 6269490)

Price on the radio and the choke stuff minus the knob someone asked for it already. Just need the cable and assembly to the carb. Thanks
Posted via Mobile Device

67ctener,
your 2nd on the radio at $50 and $30 for the choke assembly. plus shipping.

Quote:

Originally Posted by 75gmc454 (Post 6269427)

I need the door panels, a choke knob, cig lighter, and the seat belts if available.

Quote:

Originally Posted by duallyjams (Post 6269812)

I'll take the air cleaner.
I'll take what ever the key works.
I also asked about the tail gate in post 22 I believe I was first.

Duallyjams,
Key goes into ignition but wont turn it... yet. there was some additional keys but none turn it yet. Door locks work from the key as well.
I see you were 1st on the tailgate (pics below) $50 for it but its got dents and rust in the middle.

Quote:

Originally Posted by olblue60@aol.com (Post 6269807)

Is thr right fender good? Would you ship Greyhound? Thanks

John

Olblue60,
Fender is sold already before I parted it. see post 1.

Quote:

Originally Posted by midniteblues (Post 6269889)

Midnightblues,
Chrome was painted over maybe? pics attached
all levers are good and not broke
Rivets seem tight so far
Don't know if the switch works, ill add a battery and try it tomorrow.

Quote:

Originally Posted by Oddfire (Post 6269911)

I'm gonna pass on the harness. Thanks anyway.

Oddfire,
got it.

Quote:

Originally Posted by badazmalibu (Post 6269934)

$150 on all the trim after you get better pictures of all trim. I'll charge what shipping cost ends up being.
sounds good! send the pics and a PM and I can pay via Paypal Thanks,Brett

Quote:

Originally Posted by Dave (Post 6269975)

Hey Mike, heres a bump for ya. Just a little reminder, if ever decide you want let go of that seat, lmk. Lol. Good luck with sale.
Posted via Mobile Device

Dave,
Thank you... I will if that happens...

Quote:

Originally Posted by heidick70 (Post 6270229)

ill get in line for the steering wheel and the cap also, also whats the going rate for the tail gate?

Hheidick70,
I believe your 3rd for the tailgate at $50, 2nd for the steering wheel and 1st on the cap at $80 I think.

Quote:

Originally Posted by 71blksuper4x4 (Post 6270318)

Mike, can you get some good pics of the rear bumper. Thanks Trevor
Posted via Mobile Device

Trevor,
Pics below of that bumper!

All,
Ill get this thing parted early this week and have stuff ready to ship in a couple days.

Mike

Re: Parting 67 GMC CST V6

Additional pic requested

Re: Parting 67 GMC CST V6

How about the vent window assemblies? Thanks Nate

Re: Parting 67 GMC CST V6

What are the odds that the gate is dented in the same place as mine, that's a shame, gonna pass on the tail gate.

sending pm for payment info

Re: Parting 67 GMC CST V6

Now much for the top grill support?

Re: Parting 67 GMC CST V6

im out on the gate also

Re: Parting 67 GMC CST V6

Quote:

Originally Posted by duallyjams (Post 6270695)

What are the odds that the gate is dented in the same place as mine, that's a shame, gonna pass on the tail gate.

sending pm for payment info

Got your pm returning it now.

Quote:

Originally Posted by heidick70 (Post 6270746)

im out on the gate also

Understood

Quote:

Originally Posted by DREW67 (Post 6270735)

Now much for the top grill support?

$85 plus shipping. I'll inspect it first and post a picture tomorrow.

Mike
Posted via Mobile Device

Re: Parting 67 GMC CST V6

Ill take the door panels, choke and cig lighter items. Shoot me a pm with your paypal.

When you get the seat out, take a pic of the belts, then I can let you know on them. Thank You

Re: Parting 67 GMC CST V6

Quote:

Originally Posted by 75gmc454 (Post 6271073)

Ill take the door panels, choke and cig lighter items. Shoot me a pm with your paypal.

When you get the seat out, take a pic of the belts, then I can let you know on them. Thank You

I'll pm you my paypal, hold off on the payment so you can do it all if you like the belts. I'll have the seat out tomorrow.
Mike
Posted via Mobile Device