Re: "Almost Heaven" 67 - swb- Lilly
 

I'm interested to know the samething. I have some 3/8 Stainless steel but you need a certain flare to make the connections plus I have to bend everything. I kind of like Pro-Flo350 Braided Hose route! No Brainer doing it that way!

Re: "Almost Heaven" 67 - swb- Lilly
 

Merry Christmas to all !!! have not done much to the truck lately ...
my painter guy backed out on me , so have not had the cab painted ...
I need some advice on the wiring , is the http://www.summitracing.com/parts/prf-10112
or is this one the easier one to use ? http://www.ebay.com/itm/331394910421...%3AMEBIDX%3AIT

Re: "Almost Heaven" 67 - swb- Lilly
 

Heres a thread that may interest you on the wiring kit, may help make a decision.

http://67-72chevytrucks.com/vboard/s....php?p=6959818

Re: "Almost Heaven" 67 - swb- Lilly
 

thankyou , the links helped a lot , I will probably just get the whole kit
from Brothers ...
here are some pics of the progress so far ...New , Chrome SB Chevy 110 GPH 7.5 PSI Fuel Pump W/ Chrome Mounting Plate & Bolts 350, AGR Performance Billet Steering Boxes, Lokar KD-2400HT GM TH-400 Stainless Steel Electric Kickdown Cable Kit Brush Fini , SS tran cooler lines , fuel cell ,GM CHROME 120 AMP 1 ONE OR 3 THREE WIRE SBC BBC CHEVY ALTERNATOR ES-1001-C ,Holley 600 CFM Polished Aluminum Carburetor - Electric Choke (Part #0-80457SA, rebuilt TH 400 , 66 327 V8 , SS braided brake lines , 1967-1972 chevrolet c10 truck suburban chrome brake booster and master cylinder,Steering U-Joint / Vibration Damper, Polished Stainless, 3/4DD X 13/16-36 100% Genuine Borgeson,Borgeson Universal Steering Shaft Steel Alloy Universal Each 409418,Borgeson Univ Steering U-Joint Stainless Steel Polished 3/4" 36-Spline 3/4" DD ,SBC Small Block Chevy 305 327 350 400 BLACK Coated Block Hugger Shorty Headers,Black Cast Iron High-Flow Water Pump •1969-76 Small Block Chevy (Long Water Pump) Black Cast Iron , Accel 8021 - Accel 8.8mm Ignition Wires,fuel line Pro-Flo 350 Braided Hose•-8AN
1970 1971 1972 Chevy C/K Series Pickup Champion 3 Row Aluminum Radiator CC369

Re: "Almost Heaven" 67 - swb- Lilly
 

more pics , MERRY CHRISTMAS !!!

Re: "Almost Heaven" 67 - swb- Lilly
 

Still waiting on paint , so I just put another cab on so I could get
everything working ... So first thing I did wrong was blow up my tank by
not venting it , busted a weld , gas sprays out ... second I cant get my
steering right , it gets hung up wen u turn left or right and u have to jerk it
back , t I thought bad column but I had a new rebuilt one , so I put it in ,
same thing , not the column ... Any Ideas ???

Re: "Almost Heaven" 67 - swb- Lilly
 

There are a few different possibilities for why the steering could be hanging up.
Believe it or not the centerlink can be installed backwards and you won't realize it until later when you start having interference issues and tire scrub.
The other possibility is the steering box needs adjusted, it is made so that you can adjust the tightness of the gears inside, it sounds like yours is way too tight and you need to loosen it just slightly, now keep in mind that a little goes a long ways adjust it by 1/8 of a turn at a time, here is a link to a video so you can see how to do it.
https://www.youtube.com/watch?v=W5Ck4eANgII

Re: "Almost Heaven" 67 - swb- Lilly
 

Thank you Brian , I 'll check that out ...

Re: "Almost Heaven" 67 - swb- Lilly
 

Over a year later , still not done , gotta get new bed and paint it !!!
interior getting close ...

Re: "Almost Heaven" 67 - swb- Lilly
 

Are you not going to use the bed in the photo? I'm looking for a fleet side shorty myself. If you are selling the one in the photo, send me a PM and some pics. Thanks

Re: "Almost Heaven" 67 - swb- Lilly
 

sorry bed not for sale, its off another truck, just using it for mock up...

Re: "Almost Heaven" 67 - swb- Lilly
 

Okay, thanks

Re: "Almost Heaven" 67 - swb- Lilly
 

in...

Re: "Almost Heaven" 67 - swb- Lilly
 

Little more interior done ... All new glass , weather stripping , vent windows...

Re: "Almost Heaven" 67 - swb- Lilly
 

:metal: :metal: :metal: sweet!

Re: "Almost Heaven" 67 - swb- Lilly
 

Looking good, did you ever get your steering issues sorted out?

Re: "Almost Heaven" 67 - swb- Lilly
 

yes , just went back to the original gear box and all problems solved ...

Re: "Almost Heaven" 67 - swb- Lilly
 

Ah man, I have an AGR box. Hope it doesn't give me trouble. I'm liking your glove box door....

Re: "Almost Heaven" 67 - swb- Lilly
 

Do you have a part number on those front rotors?
And WHERE DID YOU GET THAT GLOVE BOX DOOR??

Re: "Almost Heaven" 67 - swb- Lilly
 

Not sure about the rotors , I bought chassis from a board member,
http://67-72chevytrucks.com/vboard/s...d.php?t=600288
Have not seen many of the glove box doors , I just happened across
this one on Ebay ...

Re: "Almost Heaven" 67 - swb- Lilly
 

Keep moving forward. Truck looks killer

Re: "Almost Heaven" 67 - swb- Lilly
 

Can not get my hood lined up everyway I move it is wrong !!!

Passenger side is up high in front and wider gap on fender , crazy ???

Will the billet hinges solve my problem ? Any advice is appreciated...

Re: "Almost Heaven" 67 - swb- Lilly
 

Just found your build and subscribing. It's looking good with everything you're doing to it. As for the hood; something that long moves a long way with just a little bit of adjustment. For the side to side gap have you tried loosening one bolt (one bolt not one side) at a time on the hood to hinge bolts (not hinge to fender)? I'm sure you've done everything we're going to ask you but its hard to know since we're not there.

Re: "Almost Heaven" 67 - swb- Lilly
 

could even be in the core support side to side if the gap at the cowl is good... ? maybe

Re: "Almost Heaven" 67 - swb- Lilly
 

That probably the best gap you'll get on the passenger side