Re: deep into my 70 SWB 5.3/4l80-e build
2 Attachment(s)
I'm going ton shave the intake down this week as well. Gotta do something about the ugliness on this one
|
Re: deep into my 70 SWB 5.3/4l80-e build
Nice! Pics and details on shaving that intake if possible! Looking good
|
Re: deep into my 70 SWB 5.3/4l80-e build
3 Attachment(s)
Got some more parts in and on today
|
Re: deep into my 70 SWB 5.3/4l80-e build
5 Attachment(s)
A little done today. Just about done with the radiator support. A little more body work.fuel lines ran. Beyond irritated with the pre bent brake lines CPP sent me for the front. Nothing lines up. Nothing even fastens together. I may be ignorant, but I think it's just screwed up. I just walked away from it today. Anyone ever seen a truck dash rot under the glove box? I assume there isn't a patch panel for this?
|
Re: deep into my 70 SWB 5.3/4l80-e build
I had a similar problem with my brake lines from performance online. Nothing seemed to line up properly. It was very frustrating. They even sent the wrong parts plus some were missing. Finally ended up getting it straightened out.
As far as your dash is concerned, I would think that someone would be able to cut a piece off of an old dash to be able to use it as a patch panel. Unless the rest of your dash is a disaster, that's the route I would take. If you're dash has holes and cuts in it then just replace the entire dash. I swapped a dash out on my 69 C20 truck. My original dash was molested and cut up. I was able to find a nice unmolested AC dash, which I swapped in. It's not that bad to do, especially when you have the truck ripped apart anyways. |
Re: deep into my 70 SWB 5.3/4l80-e build
5 Attachment(s)
Got the fan/radiator done. Got the motor and tranny mounted. All is fitting well it seems. Just gotta get after this body work. A huge thanks to Tejas Steelworks. Scotty has helped out tremendously. He seems to know his stuff. Especially with recommended parts to use on LS swaps.
|
Re: deep into my 70 SWB 5.3/4l80-e build
4 Attachment(s)
Starting to lick my lips now. She's gonna make an awful good "driver"
|
Re: deep into my 70 SWB 5.3/4l80-e build
Groovy!
|
Re: deep into my 70 SWB 5.3/4l80-e build
5 Attachment(s)
A little more done. Rear shocks on. A bit of body work. Sprayed bed liner under the cab. A few other misc things
|
Re: deep into my 70 SWB 5.3/4l80-e build
4 Attachment(s)
A few more pictures
|
Re: deep into my 70 SWB 5.3/4l80-e build
Hi Matt, I got a cab that has been rolled, so the roof is shot, but I can cut out that lower glove box section and send it to you.
I really like those wheels !! |
Re: deep into my 70 SWB 5.3/4l80-e build
Great looking build.
|
Re: deep into my 70 SWB 5.3/4l80-e build
Can't wait to see this one finished. Great job!
|
Re: deep into my 70 SWB 5.3/4l80-e build
Quote:
|
Re: deep into my 70 SWB 5.3/4l80-e build
Thanks guys. Any criticism is welcome. Ideas, input, whatever. I've got a ways to go and I'm still open to ideas on interior and a few other things.
|
Re: deep into my 70 SWB 5.3/4l80-e build
Just PM me your address, I will send it to you at no cost. Glad I'm able to help out.
|
Re: deep into my 70 SWB 5.3/4l80-e build
Quote:
Nice build! |
Re: deep into my 70 SWB 5.3/4l80-e build
Moving along nicely. I like it. Kinda the same thing I'm doing to mine.
|
Re: deep into my 70 SWB 5.3/4l80-e build
5 Attachment(s)
Thanks. I'm starting to pick up speed and momentum now that it's coming together. You lose a lot of steam just looking at a dirty stripped down frame. I got my bed put together today. Still working on the cab.
|
Re: deep into my 70 SWB 5.3/4l80-e build
Lookin good! Would love to have a shop big enough to let my dog come hang out while I'm working!
FYI looking at the pics in post 31, I think you have your spacers on the wrong side of your upper a-arm shaft. |
Re: deep into my 70 SWB 5.3/4l80-e build
Yeah, I caught that a while back and took care of it. Good eye though. The ole mutt likes laying around in the warm shop when it's cold and miserable outside.
|
Re: deep into my 70 SWB 5.3/4l80-e build
Quote:
|
Re: deep into my 70 SWB 5.3/4l80-e build
Quote:
|
Re: deep into my 70 SWB 5.3/4l80-e build
Frame turned out nicely!
|
Re: deep into my 70 SWB 5.3/4l80-e build
Thanks. I'm pretty happy with it. Not perfect, but it's awful close. She's gonna be a driver anyway. A very nice and clean driver, but she'll be driven a lot once she's finished up
|
All times are GMT -4. The time now is 01:23 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com