Re: '67 stepside project
Quote:
I think 9 grand was a good deal on that one also. |
Re: '67 stepside project
Quote:
I'll be taking the motor and transmission back out soon to clean and paint the frame.... |
Re: '67 stepside project
Thanks man.
|
Re: '67 stepside project
1 Attachment(s)
Finally received the Vintage Air kit from MCB Matt
I got the low mount LS bracket hoping I could keep the compressor down low... It fits perfectly...with room to spare...! clean compact accessory drive system...this has been a trouble free swap...so far... Attachment 2066011 |
Re: '67 stepside project
Hey that could be my bed at the moment. Mine is green and standing on end too while I removed all the bad metal. The spot weld cutter is worth it's weight. ;)
|
Re: '67 stepside project
Ha! Seems stepside beds are in vouge right now!
Tongue and groove with copious amounts of carriage bolts were in mine as well. I ground the heads off most of mine and drove them out. Makes the cross sills look like swiss cheese. |
Re: '67 stepside project
2 Attachment(s)
I ended up buying some new bed pieces after I discovered a lot of rust through
I have the bed on a quick built dolly so I can start getting it assembled and squared up..ordered the wood today I welded the stake pocket back on that was out of place...looks like it's gonna end up a fairly good fit.... Attachment 2102659 Attachment 2102658 |
Re: '67 stepside project
Very nice keep them coming
|
Re: '67 stepside project
Very nice! Where did you get your bed kit? I got mine from Mar K back in March and have just now got the bed front, tailgate and rear cross sill ready for epoxy primer. Too many other things been distracting me.
|
Re: '67 stepside project
Quote:
I ordered the oak wood floor yesterday...gonna do a trial fit....then start getting it ready for paint. I saw the Mar-K stuff AFTER I bought the AMD....how's the fit on it? |
Re: '67 stepside project
2 Attachment(s)
Quote:
|
Re: '67 stepside project
Quote:
|
Re: '67 stepside project
Great looking project!! Looking forward to more updates!
What part of East TN are you in? |
Re: '67 stepside project
Quote:
I'm in the Maryville/Knoxville area |
Re: '67 stepside project
the truck bed looks amazing!
|
Re: '67 stepside project
Quote:
|
Re: '67 stepside project
2 Attachment(s)
A little forward progress.
SOKY had the bed wood in stock...got it in 2 days Attachment 2103098 I'm determined to make this reproduction stuff work. The rear cross sill..it seems important that it fits correctly.. a little trim here a few slotted holes there and it's getting closer. Attachment 2103099 |
Re: '67 stepside project
4 Attachment(s)
A little more progress on the cab...peeling back more layers of rotted sheet metal...I hate spot welds!
I'd bet most trucks look like this in this area Attachment 2141683 most of the roof is solid...have a patch for the front section Attachment 2141684 repair piece looks like a decent fit Attachment 2141685 would like to find some good cut outs for the corners Attachment 2141686 |
Re: '67 stepside project
2 Attachment(s)
New rear panel arrived today...I was excited until I discovered that it was the wrong one
Box was labeled 67 small window...panel was large window.... ALWAYS check for shipping damage.....and incorrect part... Attachment 2141687 Attachment 2141688 |
Re: '67 stepside project
Quote:
|
Re: '67 stepside project
Great build so far, thanks for all the info and pics, sorry to see the rot in the cab.
|
Re: '67 stepside project
3 Attachment(s)
Cut out enough rotten sheet metal to check the new roof panel...
Really happy with the fit so far....lines up nice to the new front header piece. Attachment 2142313 Attachment 2142314 Attachment 2142315 |
Re: '67 stepside project
4 Attachment(s)
Surgery continues...
welded in some reference points for the windshield frame got the inner A pillar repair panels today shout out to member atog....he's sending me some upper windshield frame cut outs.... inner roof panel looks like it will be a decent fit as well Attachment 2142768 Attachment 2142769 Attachment 2142770 Attachment 2142771 |
Re: '67 stepside project
WOW, I don't have the skill to attempt a job like that, good luck to you man. and good on you for saving that cab.
|
Re: '67 stepside project
And I thought I was doing some complex body work on my truck...I do not envy you having to go through all this. You are definitely an inspiration, I will certainly follow this thread.
|
All times are GMT -4. The time now is 07:58 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com