Re: Soft topper installed/review
Only a few bedrail bolts lined up on my 70. They told me you only need a few. But I need to drill the L bracket to add a couple more as it does pull up a little on the back. Yes, Drill the bracket and use your existing bed holes.
I also had little trouble With The passenger side upper triangle bracket hitting the door frame before closing. And the header piece didn’t seem to follow the contour of the windshield header. But once it was centered and start screwing it down, it went into place. Just didn’t seem right when holding it up there. I have the newer version w no snaps on the header. |
Re: Soft topper installed/review
1 Attachment(s)
Quote:
Attachment 2141035 |
Re: Soft topper installed/review
Follow up. The instructions clearly say bolt down with 3 bolts per side which is the number of slots I can get to line up. It appears they either didn't want to swiss cheese the rail with the extra 2 slots for strength/cost reasons, or they don't think it's necessary. I marked the 2 slots locations, so I can add bolts later if necessary. Hope this helps the next confused guy out there!
|
Re: Soft topper installed/review
Mine has 3 bolts on each side, fairly evenly spaced. It's been on for several months and I've had no problems with it.
|
All times are GMT -4. The time now is 08:19 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com