Re: Trailing Arm Mounts
 

Thanks :D

Re: Trailing Arm Mounts
 

Hey captain im looking at putting a 14 bolt sf 6 lug axle under my 61 crew cab. Still working everything out. The 14 bolt measures about 3.33 on the axle tube. Will the new mounts accommodate this bigger size? Thanks

Re: Trailing Arm Mounts
 

I don't know why the trailing arm mounts I make for the 14 bolt wouldn't work on your 14 bolt. I haven't had any complaints of them not fitting.

Re: Trailing Arm Mounts
 

Please send me a PM for the trailing arm 14 bolt mounts. I need to get a set. Thanks

Re: Trailing Arm Mounts
 

I'll send you a PM.

Re: Trailing Arm Mounts
 

Parts received. Very nice. Thanks.

Re: Trailing Arm Mounts
 

I have one set of stock length U-bolts available for $47.50 plus shipping. If there is a genuine interest in these, I will consider stocking them.

Re: Trailing Arm Mounts
 

Hey Captain,
You sold me. I will take one set for a dana 60. Rear was out of a 69 with leaf springs. Measures identical but required much grinding!
M/O mailed today.
Thanks
Billy

Re: Trailing Arm Mounts
 

I will let you know when I receive your payment and ship your Dana 60 trailing arm mounts.

Re: Trailing Arm Mounts
 

The U-bolts are sold.

I now have trailing arm mounts for the Dana 44 and the ultra rare 6 lug Dana 60 with the 2-3/4" axle tubes.

Re: Trailing Arm Mounts
 

I will be on vacation from 08-08-16 thru 08-25-16. If you wish to make a purchase you can post here in this for sale thread, send me a PM or an email to captainfab454@hotmail.com. I will reply to your inquiry when I return on the 25th. I do currently have a list of orders to build and ship when I return but I will add your name to the list in order of when received. Thanks for your understanding.

Re: Trailing Arm Mounts
 

I now stock trailing arm mounts for the 3.250" axle tubes found on some Ford 9" differentials.

Re: Trailing Arm Mounts
 

I'll take a set of these trailing arm mounts for a 14 bolt. Please watch for a paypal payment of $68.60. Thanks

Re: Trailing Arm Mounts
 

Payment received and PM replied to. Thanks for the purchase :)

Re: Trailing Arm Mounts
 

intrested in 10 bolt trailing arm mounts .. thank you

Re: Trailing Arm Mounts
 

I replied to your PM.

Re: Trailing Arm Mounts
 

I have the u-bolts back in stock again.

Re: Trailing Arm Mounts
 

I am officially notifying everyone that I will be on vacation from 02-05-18 thru 02-13-18. I will do my best to get all orders built and shipped before I leave, if placed by 01-31-18. Orders placed while I am gone will be built and shipped in order of receipt of payment once I return. Thanks for understanding.

Re: Trailing Arm Mounts
 

PayPal sent for a set of brackets. Thanks again

Re: Trailing Arm Mounts
 

Payment received, Thanks :)

Re: Trailing Arm Mounts
 

Sent you a pm. I also need a set of bolts in addition to the coil pads please. Thanks brother!

Re: Trailing Arm Mounts
 

I replied to your PM.

Re: Trailing Arm Mounts
 

Here is one of the threads here on the forum that shows in detail how to weld on trailing arm mounts at the correct angle on a leaf spring differential.

http://www.67-72chevytrucks.com/vboa...d.php?t=624445

Re: Trailing Arm Mounts
 

Do you make anything to adapt the trailing arm u-bolt holes/mounts on the C20
with an HO 52 when swapping in a 12 bolt with a smaller axle tube?

Re: Trailing Arm Mounts
 

The spacing of the U-bolt holes thru the trailing arms are the same whether they are under a C10 or a C20. So absolutely nothing special required. If you need a set of trailing arm mounts for a 12 bolt, I have those.

Re: Trailing Arm Mounts
 

Maybe I'm not seeing something clearly but the axle tube on the HO52 is bigger than the axle tube on the 12 bolt. Accordingly the U-bolts and corresponding trailing arm holes are wider than the 12 bolt axle tube. Right?

Re: Trailing Arm Mounts
 

I suppose it's not critical if the U-bolts and holes are wider if the mount cutout is the correct circumference for the 12 bolt. Is that how you see it?

Re: Trailing Arm Mounts
 

Do you make panhard bar mounts as well?

Re: Trailing Arm Mounts
 

As I said above.....the trailing arm holes for the u-bolts are the same spacing whether they are for a C10 or a C20.....no difference. I have made and sold a lot of trailing arm mounts and they all have the same u-bolt hole spacing.

No I do not yet make a panhard bar mount. I have been trying but working 80 hrs/7 days a week every week every month doesn't leave much time to develop new products.

Re: Trailing Arm Mounts
 

Due to an increase in the cost of having my parts laser cut, I have been forced to raise my prices. I'm not making any more money, just trying to stay in business with these increases in my costs. Thanks for understanding.

Re: Trailing Arm Mounts
 

on a h052 Swap to 14 ff 72 c20 rear coil truck will the truck arms need the hole moved for a wider axle tube fit ?

Re: Trailing Arm Mounts
 

No the holes remain exactly the same as original. With the 14 bolt, there needs to be a slight groove put into the axle tubes on both sides so that the u-bolts will pass by and line up with the holes. This groove does not need to be more than probably 3/4" long. The 14 bolt axle tubes are 3/8" thick, so this does not present an issue.

I do now offer a panhard bar mount for the 14 bolt.

Re: Trailing Arm Mounts
 

Hi I’m in need of a set of perches for an HO52/72 axle. If you can give me a lead time and an email for payment, I’d like to get a set on the way

Re: Trailing Arm Mounts
 

PM sent.

Re: Trailing Arm Mounts
 

Here is a link to my new website and online store where you can see and purchase all of the products that I fabricate for the '60-'72 GM trucks.

https://customfab-cda.com