Re: Our "What are we going to do?" 66 Suburban Build
Quote:
|
Re: Our "What are we going to do?" 66 Suburban Build
5 Attachment(s)
Smoothed the firewall a bit and then primered and painted it...the original Balboa blue.
|
Re: Our "What are we going to do?" 66 Suburban Build
3 Attachment(s)
and body back on chassis...
|
Re: Our "What are we going to do?" 66 Suburban Build
That looks awesome..how long before you are back driving it
|
Re: Our "What are we going to do?" 66 Suburban Build
Quote:
|
Re: Our "What are we going to do?" 66 Suburban Build
4 Attachment(s)
We have started fitting the front sheet metal back on and are finding a few areas that need massaging.
Right off the bat, the blower belt was against the fans/radiator (first pic). My son worked on the rad support and opened it up to allow the rad to slide forward over an inch...plenty of clearance now. We'll rework the mounts and should be good to go! |
Re: Our "What are we going to do?" 66 Suburban Build
3 Attachment(s)
Got the upper/lower radiator mounts reworked and fit in...locks it in nicely. Also got the fuel regulator mounted and all the lines ran.
|
Re: Our "What are we going to do?" 66 Suburban Build
2 Attachment(s)
Continuing to fit pieces of the puzzle in...
|
Re: Our "What are we going to do?" 66 Suburban Build
Looking good so far..stay at it
|
Re: Our "What are we going to do?" 66 Suburban Build
2 Attachment(s)
Quote:
Started playing with the hydro boost and lines fit-up... |
Re: Our "What are we going to do?" 66 Suburban Build
3 Attachment(s)
Built the PS pump mount...made a upside down cradle that captures the modified PSC pump and allowed us to move the pivot point out to where we could optimize the limited amount of adjustment space we had.
|
Re: Our "What are we going to do?" 66 Suburban Build
2 Attachment(s)
Added some material to the upper tensioner mount plate tonight and hung the reservoir off of that also...
|
Re: Our "What are we going to do?" 66 Suburban Build
Looking good
|
Re: Our "What are we going to do?" 66 Suburban Build
4 Attachment(s)
We made some down bars for the engine bay to help stiffen up the chassis...bolts in between the top of the frame up front and the upper corners of the firewall. Tubes come off mating plates on the inner firewall and are welded into the a-pillar/dash bar nodes.
|
Re: Our "What are we going to do?" 66 Suburban Build
Nice work on the tubes
|
Re: Our "What are we going to do?" 66 Suburban Build
Quote:
|
Re: Our "What are we going to do?" 66 Suburban Build
3 Attachment(s)
Column to box was interesting...4 u-joints, 3 sections of shaft, and 2 stand-offs.
|
Re: Our "What are we going to do?" 66 Suburban Build
4 Attachment(s)
Working through some more things...hydroboost lines ran and throttle pedal/cable done.
|
Re: Our "What are we going to do?" 66 Suburban Build
4 Attachment(s)
We've been putting this next step off, but decided to jump into it tonight.
Cutting the hood! My son picked up a spare hood for a practice cut/fit...we laid out a basic rectangular hole that looked like it should clear...and it did, but not exactly what we wanted. That allowed us to gain some confidence in our technique and pattern before cutting the original hood. |
Re: Our "What are we going to do?" 66 Suburban Build
5 Attachment(s)
We modified the hole layout a bit and started cutting into the original, stock, patina matching hood...no pressure there!
It all worked out though, no problems and we really like the look. |
Re: Our "What are we going to do?" 66 Suburban Build
4 Attachment(s)
Started on the center console and shifter mount...
|
Re: Our "What are we going to do?" 66 Suburban Build
3 Attachment(s)
Finished welding out the center console framework and shifter mount...also got the NOS dual bottle rack mount built.
|
Re: Our "What are we going to do?" 66 Suburban Build
You guys are doing some very nice work. Any tin work planned for the console?
|
Re: Our "What are we going to do?" 66 Suburban Build
Quote:
|
Re: Our "What are we going to do?" 66 Suburban Build
Dam that is a tight fit ..looks awesome...I didn't think you were going with nos...that is going to put out some big numbers
|
All times are GMT -4. The time now is 11:28 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com