|
Re: 55 Wagon Progress
Got a picture?
|
Re: 55 Wagon Progress
http://i615.photobucket.com/albums/t...S/SidsD441.jpg
I plan on cleaning up the casting flash and painting the aluminum parts. Just not sure on the rusty steel yokes. |
Re: 55 Wagon Progress
Look for some "pre-caulking filler rope" or other such product to seal between the shafts and the housing. Then media blast, the pull out the rope afterward and use air nozzle to clean up anything that may have sneaked past. Leave out for the Epoxy painting stage, a bit more paint inside shouldn't hurt..
Oh.. and I'd separate the half shafts to clean up the yokes and paint all the nooks and crannies. |
Re: 55 Wagon Progress
Well we didn't get many pictures tonight, but we've got the frame back on 4 wheels!
http://i5.photobucket.com/albums/y16...ure%204034.jpg |
Re: 55 Wagon Progress
Looking very nice...Jim
|
Re: 55 Wagon Progress
Thanks Jim!
Well after the weekend off for the Snowmaggedon, back at more parts prep for the next round of primer.. Kyle did some media blasting on the steering box and other parts while I blocked out the inside of the hood and the hood brace.. http://i5.photobucket.com/albums/y16...ure%204036.jpg http://i5.photobucket.com/albums/y16...ure%204038.jpg http://i5.photobucket.com/albums/y16...ure%204040.jpg Then Kyle worked on degreasing and scuffing the trans... http://i5.photobucket.com/albums/y16...ure%204041.jpg |
Re: 55 Wagon Progress
Nice! Not worried about media getting in the steering box while blasting? I have the same sanding blocks, how do you like them?
|
Re: 55 Wagon Progress
It looked to be pretty tight around the shafts, and we had plastic plugs in the PS orifices. So Kyle just stayed away from the input/output shafts and got the bulk of it..
I have Durablocks, AFS, and countless home-made for special application. Each has there calling :lol: |
Re: 55 Wagon Progress
I started some engine assembly this evening, getting the flex plate bolted on and torqued down, starter installed and checked for clearance, and checked clearances for the header..
http://i5.photobucket.com/albums/y16...ure%204047.jpg http://i5.photobucket.com/albums/y16...ure%204048.jpg http://i5.photobucket.com/albums/y16...ure%204049.jpg Kyle blocked out the doors, it looks like our "adjustment" with the stovepipe crimper pliers did the trick to remove the high spot... http://i5.photobucket.com/albums/y16...ure%204044.jpg http://i5.photobucket.com/albums/y16...ure%204046.jpg |
Re: 55 Wagon Progress
With the trans being aluminum and high temp, what primer and paint will you use?
Looks great. Can't wait to see it all back together. |
Re: 55 Wagon Progress
We're going to use the SPI epoxy to give it a nice semi-gloss black.
|
Re: 55 Wagon Progress
We worked Sunday this past weekend, Kyle got a few more pieces media blasted so we could get some epoxy sprayed.. Then, as I was spraying, Kyle gave the wagon a Scotchbrite scrub with some soapy water to neutralize the soda...
http://i5.photobucket.com/albums/y16...ure%204061.jpg http://i5.photobucket.com/albums/y16...ure%204050.jpg Doors moved out of the way.....for now.. http://i5.photobucket.com/albums/y16...ure%204052.jpg http://i5.photobucket.com/albums/y16...ure%204064.jpg http://i5.photobucket.com/albums/y16...ure%204053.jpg http://i5.photobucket.com/albums/y16...ure%204055.jpg http://i5.photobucket.com/albums/y16...ure%204056.jpg http://i5.photobucket.com/albums/y16...ure%204059.jpg Sometimes the part has no holes for securing for paint.... http://i5.photobucket.com/albums/y16...ure%204057.jpg http://i5.photobucket.com/albums/y16...ure%204058.jpg |
Re: 55 Wagon Progress
Tonight's update, Headers installed using stainless socket heads....
http://i5.photobucket.com/albums/y16...ure%204065.jpg Trans and driveshaft installed http://i5.photobucket.com/albums/y16...ure%204066.jpg http://i5.photobucket.com/albums/y16...ure%204067.jpg Exhaust installation... http://i5.photobucket.com/albums/y16...ure%204068.jpg Steel donut gaskets.... http://i5.photobucket.com/albums/y16...ure%204070.jpg Exhaust that will be heard but not seen.... http://i5.photobucket.com/albums/y16...ure%204072.jpg http://i5.photobucket.com/albums/y16...ure%204074.jpg http://i5.photobucket.com/albums/y16...ure%204088.jpg Header clearance issues to the steering box... http://i5.photobucket.com/albums/y16...ure%204076.jpg http://i5.photobucket.com/albums/y16...ure%204077.jpg http://i5.photobucket.com/albums/y16...ure%204078.jpg Header clearance tool for tube #3... http://i5.photobucket.com/albums/y16...ure%204079.jpg http://i5.photobucket.com/albums/y16...ure%204080.jpg http://i5.photobucket.com/albums/y16...ure%204081.jpg http://i5.photobucket.com/albums/y16...ure%204082.jpg Drum sander clearance for tube #2... looks like we have some touch up painting to do.. http://i5.photobucket.com/albums/y16...ure%204084.jpg http://i5.photobucket.com/albums/y16...ure%204085.jpg Much better... http://i5.photobucket.com/albums/y16...ure%204086.jpg http://i5.photobucket.com/albums/y16...ure%204087.jpg |
Re: 55 Wagon Progress
Looking good Robert...
Mark.. |
Re: 55 Wagon Progress
Awesome work. I know the finished product will be top notch.
By thee way it looks like you put your flexplate on backwards? |
Re: 55 Wagon Progress
First off, thanks to all who let me know the flex plate was in backwards. I don't normally wrench on drivetrains, so glad to find out before the body was on the frame. I guess all the decals gave the false sense of "this side out". Wouldn't you know, when I turned it over, the instructions for dummies was right there in plain sight!
http://i5.photobucket.com/albums/y16...ure%204106.jpg All back together.... http://i5.photobucket.com/albums/y16...ure%204107.jpg Working on another header clearance issue... http://i5.photobucket.com/albums/y16...ure%204096.jpg Removed the factory carriage bolts, they will be replaced with some grade 8 hex head bolts, and to add more clearance we'll get rid of the nuts inside and use some locking heli-coils.. http://i5.photobucket.com/albums/y16...ure%204098.jpg http://i5.photobucket.com/albums/y16...ure%204099.jpg ....for much better clearance. http://i5.photobucket.com/albums/y16...ure%204101.jpg http://i5.photobucket.com/albums/y16...ure%204103.jpg More parts added.... http://i5.photobucket.com/albums/y16...ure%204112.jpg http://i5.photobucket.com/albums/y16...ure%204114.jpg http://i5.photobucket.com/albums/y16...ure%204115.jpg |
Re: 55 Wagon Progress
Looking good! Where did you get the new vented brake tee bolt on the axle?
|
Re: 55 Wagon Progress
|
Re: 55 Wagon Progress
Ha ha . i put mine on backwards before. You couldnt turn the motor over because it was bound up against the convertor. The SFI stickers go towards the front. That way you can see them from under the vehicle.
|
Re: 55 Wagon Progress
Well the stainless lock nuts showed up today, so we pulled the third member, cleaned the mounting surfaces, installed a new gasket and torqued things down.
http://i5.photobucket.com/albums/y16...ure%204118.jpg http://i5.photobucket.com/albums/y16...ure%204119.jpg We also had taken delivery of the Explorer brake kit that gives us shoes inside the rotor for the parking brake. So we have some Lincoln Versailles parts if anyone needs some... http://i5.photobucket.com/albums/y16...ure%204120.jpg http://i5.photobucket.com/albums/y16...ure%204121.jpg http://i5.photobucket.com/albums/y16...ure%204122.jpg Went digging through the brake hose selection at the local Napa store, Guy Auto Parts. This should work for the rear, front hoses should be here Saturday. http://i5.photobucket.com/albums/y16...ure%204123.jpg http://i5.photobucket.com/albums/y16...ure%204124.jpg Now we need a bracket to anchor the hose end... We came up with this design using 16 gauge CRS, and planned to clamp it under the U-bolts... http://i5.photobucket.com/albums/y16...ure%204116.jpg http://i5.photobucket.com/albums/y16...ure%204117.jpg http://i5.photobucket.com/albums/y16...ure%204127.jpg http://i5.photobucket.com/albums/y16...ure%204126.jpg Now looking at it, I'm not sure I want the U-bolts off the axle housing, and may just cut the ears off and plug weld the bracket to the housing. Thoughts? |
Re: 55 Wagon Progress
Nice! Wouldn't it be better to have the flex to hard line bracket on the frame? Less vibration and flexing on the frame. Just my thoughts and not necessarily the right way. I'm in the middle of figuring out what flex lines I need on my build. Having a hard time with it.
|
Re: 55 Wagon Progress
http://i5.photobucket.com/albums/y16...ure%204115.jpg
This one is the flex to the frame, and has the distribution block for each side of the axle housing. The flex at the calipers are only to allow for caliper movement.. |
Re: 55 Wagon Progress
Ok Gotcha! Do you mind schooling me on brake lines? No idea on what fittings to use on the hard lines as well as what type of flare to use. I can PM you if you want so not to derail your build thread.
|
Re: 55 Wagon Progress
typically they are a reverse flare
|
| All times are GMT -4. The time now is 02:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com