Re: Porterbuilt Dropmember
Super clean. I say run it bed less
|
Re: Porterbuilt Dropmember
I most definitely will for a while especially because it will take me a while to build the bed structure to clear the notch and what not.
|
Re: Porterbuilt Dropmember
5 Attachment(s)
Quote:
This Rooke truck is on point. Would like to see a build thread on it: Attachment 1818954 Attachment 1818955 Attachment 1818956 Attachment 1818957 Attachment 1818958 |
Re: Porterbuilt Dropmember
5 Attachment(s)
Pluggin' away...
Once I get it all assembled, checked for clearance etc, and working with the body on it... I'll blow it all back apart for paint & powdercoat. I'm having an issue with the BBC sitting way low in the chassis, but I actually found that in post #597 I asked and was answered, that the mounting tabs for the SBC and BBC are the same. I can't even use a set of manifolds with the motor right now as it sits...it needs to come up 3/4" or so... Waiting to hear back from PB now. |
Re: Porterbuilt Dropmember
4 Attachment(s)
Quote:
Few more pics: Attachment 1835190 Attachment 1835193 Attachment 1835191 Attachment 1835192 |
Re: Porterbuilt Dropmember
Quote:
|
Re: Porterbuilt Dropmember
bump this.
|
Re: Porterbuilt Dropmember
3 Attachment(s)
Newer pics, but I’m no where near done. First pic is ride height.
Remember, I’m a touring front DM and mild rear DM. The kmember lays on the concrete. |
All times are GMT -4. The time now is 12:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com