Re: Bringing the '65 back to life
Thanks guys!
Quote:
|
Re: Bringing the '65 back to life
Quote:
|
Re: Bringing the '65 back to life
The rear is a 31x16R15. I believe the front is a 235/70R15, but I'd have to check.
|
Re: Bringing the '65 back to life
Quote:
|
Re: Bringing the '65 back to life
4 Attachment(s)
Had to run to Home Depot for a fitting last night. When I came back out to the truck, the sunset looked great, so I snapped a few pics with my iPhone. Wish I would've had a real camera and been in a better location than HD's parking lot, but for a total impromptu shoot, I think these turned out well.
|
Re: Bringing the '65 back to life
Quote:
|
Re: Bringing the '65 back to life
2 Attachment(s)
Thanks.
Simple improvement today. Ditched the rattle-prone, P.O.S. re-pop door checks for a pair of modified Jeep Cherokee door checks. I used the door checks for the front doors of a '84-'01 Jeep Cherokee. Benefits include two detents to hold the door open, they don't rattle, and if the rubber fails, they won't allow the door to smash into the fender. Out of the box, the detents were too aggressive; they required so much effort to overcome that I was worried about breaking the clevis out of the door pillar. Additionally, the "full open" position was not quite open enough. Grinding/smoothing down the detents and cutting the rubber bump stops in half corrected both issues. Repop door checks on the left and top, modified Cherokee door checks on the right and bottom. |
Re: Bringing the '65 back to life
Yup, I definitely need to do that door check mod to my truck. The repop ones I installed a couple years ago already broke
|
All times are GMT -4. The time now is 09:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com