The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   CA 73-91 K5 Blazer Jimmy rear sill scuff plates NEW (https://67-72chevytrucks.com/vboard/showthread.php?t=759352)

Crcrft78 11-10-2019 09:45 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
:c2:

Bohemian 11-30-2019 11:50 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Quote:
Originally Posted by Irish1941 (Post 8617591)
OK fellas
I got first test batch done. Minor tweaks and I'll be good to go.
I'll also have the '73-'77 front plate for the rear floor ready by then as well
It'll be made from stainless like the original.
As soon as I figure out photo hosting, I'll post pix up
Thanks!
Let us know when they're available and how to best contact you to purchase your pm is not working.

I too want one rear for my 82 k5.

thanks in advance.

pops45 12-03-2019 11:27 AM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
I’m in for one when they’re ready.

Heliarcn 12-03-2019 11:32 AM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
I'm interested in both front and rear sill plates.

chevyross 12-28-2019 11:16 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Please let me know when the rear sill plates are available. I need one for my '89 GMC Jimmy.

Thanks for reproducing the plates!

gw69 01-01-2020 05:21 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
I'm also interested in both front and rear sill plates.


Thanks. Mark

Irish1941 03-06-2020 01:24 AM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Rear plates are back in stock!
Will be ready for shipping March 12/20
Prices will be same. Costs went up but I'll honor the original 67-72 price
73-77 front plates will ready around end of March. Maybe sooner.
Sorry for delay but 2019 was bit of a$$ kicker.
I made them hair longer for those with custom side panels and redesigned the holes.
Same quality, just small changes.
PM any questions you have.
Thanks for your support!

https://i.ibb.co/YRkrvT0/IMG-2799.jpg
https://i.ibb.co/6Jt7KvT/IMG-5047.jpg

weever82 03-11-2020 04:54 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
PM Sent. I am so stoked, been waiting for a bit.

I will take one.

Irish1941 03-11-2020 08:50 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Quote:
Originally Posted by weever82 (Post 8693003)
PM Sent. I am so stoked, been waiting for a bit.

I will take one.
Thanks! Replied

ptrparker 04-26-2020 12:40 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Very interested. When you have more available I’ll purchase one.

Naught 04-26-2020 01:02 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Interested... When and how do i get one?

Irish1941 04-27-2020 11:36 AM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
I have a bunch boxed and ready to go. PMs sent

Bmstd 05-06-2020 01:54 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
I am ready to purchase rear sill plate. Please let me know how.

Irish1941 05-07-2020 11:44 AM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
PM sent

Heliarcn 05-11-2020 10:22 AM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
I'll take one of the rear sill plates for a 76 Blazer. Any progress on the front plate?

Irish1941 05-11-2020 01:35 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Quote:
Originally Posted by Heliarcn (Post 8736999)
I'll take one of the rear sill plates for a 76 Blazer. Any progress on the front plate?
PM on its way.
Got you covered for a rear plate. Front plate production has ground to a halt due to the virus.

olanchamedic 05-27-2020 01:39 AM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
PM sent!

SBTork 05-27-2020 01:10 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
PM sent

lilrandy 06-08-2020 09:02 PM
I would like to purchase a sill plate if available. Lilrandy29720@yahoo.com


Quote:
Originally Posted by Irish1941 (Post 8212522)
*BACK IN STOCK. Shipping March 12th, 2020! GO TO LAST PAGE!
After a lot of false starts over last few yrs, , pretty stoked I finally got these ready to go. It's a fairly complex piece to make but I'm happy with way they turned out. I'm real picky when it comes to my truck and wanted a product that I would I buy.

These fit all full size Blazers & Jimmy from 1973 to 1991. I checked those against a bunch of trucks and against several plates.
The 73-91 rear scuff plate is often trashed and just plain missing and NOS is long gone and not cheap if you do find one.

Made in right here in California from US material.
Not made overseas whatsoever!

I made them thicker than the originals so they are a little more dent resistant and also made rear lip that sits on the carpet longer so carpet stays put.
They come covered in protective vinyl with a mill finish that matches original but can be polished to a mirror if thats look you want.
I will also be including proper GM small head oval #8 screws with the plate.
Plate works best on fresh carpet or rubber mat with underlay. They work fine on old carpet but sometimes they can get caught under the tail gate if carpet is really mashed down. Flattened carpet can put plate at wrong angle.

They are $135 shipped anywhere in lower 48. They will be on eBay as well but obviously higher priced there.
Look over the pix and PM or reply here with questions.
Installed in another members K5 who was part of the in field testing team. :)
https://farm5.staticflickr.com/4791/...f899fbf6_z.jpg

https://farm5.staticflickr.com/4778/...b4306117_z.jpg
Before pix in my official test mule!
https://farm5.staticflickr.com/4802/...9a442538_z.jpg
After
https://farm5.staticflickr.com/4773/...ab3432d2_z.jpg
Profile. Top is GM bottom is my plate.
https://farm5.staticflickr.com/4776/...74f798c3_z.jpg
Posted via Mobile Device

kevinr1970 06-23-2020 06:40 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff trim plates NEW
 
Send you a PM, want one!

Quote:
Originally Posted by Irish1941 (Post 8212522)
*BACK IN STOCK. Shipping March 12th, 2020! GO TO LAST PAGE!
After a lot of false starts over last few yrs, , pretty stoked I finally got these ready to go. It's a fairly complex piece to make but I'm happy with way they turned out. I'm real picky when it comes to my truck and wanted a product that I would I buy.

These fit all full size Blazers & Jimmy from 1973 to 1991. I checked those against a bunch of trucks and against several plates.
The 73-91 rear scuff plate is often trashed and just plain missing and NOS is long gone and not cheap if you do find one.

Made in right here in California from US material.
Not made overseas whatsoever!

I made them thicker than the originals so they are a little more dent resistant and also made rear lip that sits on the carpet longer so carpet stays put.
They come covered in protective vinyl with a mill finish that matches original but can be polished to a mirror if thats look you want.
I will also be including proper GM small head oval #8 screws with the plate.
Plate works best on fresh carpet or rubber mat with underlay. They work fine on old carpet but sometimes they can get caught under the tail gate if carpet is really mashed down. Flattened carpet can put plate at wrong angle.

They are $135 shipped anywhere in lower 48. They will be on eBay as well but obviously higher priced there.
Look over the pix and PM or reply here with questions.
Installed in another members K5 who was part of the in field testing team. :)
https://farm5.staticflickr.com/4791/...f899fbf6_z.jpg

https://farm5.staticflickr.com/4778/...b4306117_z.jpg
Before pix in my official test mule!
https://farm5.staticflickr.com/4802/...9a442538_z.jpg
After
https://farm5.staticflickr.com/4773/...ab3432d2_z.jpg
Profile. Top is GM bottom is my plate.
https://farm5.staticflickr.com/4776/...74f798c3_z.jpg

Irish1941 06-23-2020 08:36 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
And replied...
I'm working on new shipping method as no matter what I do USPS finds a way to wreck them in the EXACT some manor. Wrecked 7 in last 2 months.
Boxed, doubled boxed, tube, triangle box, braced...they find a way to bend them. Trying one more thing and if it doesn't work, Im tossing in the towel.

https://i.imgur.com/C0NhwrS.jpg?1
https://i.imgur.com/a90x2Tz.jpg?1

1774btcrew 06-26-2020 12:36 AM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Have you tried the hard pressed 90 degree cardboard lengths? I have had good luck with those and also a 1x2 seems to work well and they are cheap. Just a thought. I ship almost daily and have had good luck those ways

Irish1941 06-26-2020 12:25 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Way ahead of you. Tried both of those and they snapped them. Shipped dozens and lost total of maybe 12.
The fact that USPS is blaming packing on their poor handling is mind boggling. And they won't honor insurance claims.
Takes a lot of effort to bend these like that. I've tossed them off a roof from 45' up multiple times and no damage. Ran over the box with my truck. Tweaked but still good.
Pretty sure what's going on is they are being driven into front wall of a trailer while forklift pushes in mail tote.
Nothing is going save them.

60burb4me 07-03-2020 07:41 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
I am ready to purchase a rear sill plate. please PM me.
thank you

Artemis Farms 07-08-2020 07:14 PM
Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW
 
Quote:
Originally Posted by Irish1941 (Post 8764226)
Way ahead of you. Tried both of those and they snapped them. Shipped dozens and lost total of maybe 12.
The fact that USPS is blaming packing on their poor handling is mind boggling. And they won't honor insurance claims.
Takes a lot of effort to bend these like that. I've tossed them off a roof from 45' up multiple times and no damage. Ran over the box with my truck. Tweaked but still good.
Pretty sure what's going on is they are being driven into front wall of a trailer while forklift pushes in mail tote.
Nothing is going save them.
Irish - if you’re still shipping, I’d like to buy both front and rear. However, it looks like the front plates may not be available right now? But I’ll certainly take a rear if it’s available.

Thx.

PS - what about using a PVC pipe to ship? Just a thought...


All times are GMT -4. The time now is 07:03 PM.
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com