Re: 2wd swap
It's does good til full droop.
But it's well beyond the advertised bag travel. |
Re: 2wd swap
2 Attachment(s)
Is a 1.500 id bushing enough interference?
|
Re: 2wd swap
Quote:
Relevant to what? |
Re: 2wd swap
Guess you're not a mind reader.
For our rear links. Was planning in using the the rear spring hanger to locate the lower link. 2 inch x 1/4 wall dom tube is 1.490 I.D |
Re: 2wd swap
1 Attachment(s)
Wheels came in American racing rodders
20x8 and 9.5 with 245/40r20 and 275/40r20 kuhmos Can't wait to mock it up |
Re: 2wd swap
Nice.
What was the outcome on the rear link bar/bushing combo? |
Re: 2wd swap
Quote:
The bushing fits with grease. Rolled a edge of the urethane May have to hone them a bit. Still on the fence about the 2 link... |
Re: 2wd swap
Quote:
|
Re: 2wd swap
1 Attachment(s)
Quote:
Kid wants a 4 link. I want simple, he wants performance. Just happy we got a rack made for it to move around carrying it was killing me. |
Re: 2wd swap
(2 link + 4 link) / 2 people = 3 link?
|
Re: 2wd swap
1 Attachment(s)
2 link- 4 link- trailing arm its all in the air currently
Just happy I don't have to carry the frame around. And trying to convince myself I shouldn't 5 lug swap and lay the crew cabbie |
Re: 2wd swap
Quote:
|
Re: 2wd swap
Quote:
454 4L80 126k the paint is starting to die finally and starting to show its age. Door handles window motors wonky gauges typical stuff. |
Re: 2wd swap
1 Attachment(s)
Quote:
Mine.... |
Re: 2wd swap
Definitely 8 lug.
Well if I go that way. You'll get a pm with a parts list. You helped me a ton with the 91 I did for my bro in law |
Re: 2wd swap
Quote:
Pretty basic static drop for now. Unsure if I'll do full bag swap or just helpers @ this point. The plan was full swap but it sits good & it's nice not having to clearance the bejeezus out of everything. It high centered this past weekend pulling that load in the pic as it sits. Heavier loads will need some help. |
Re: 2wd swap
2 Attachment(s)
This is the '91 3500 you helped me with.
350 4spd now with a 3.08 10 bolt. Went ghetto tho reamed 1/2 stock spindles for the 3500 ball joints Clipped 2 coils and new axle pads cause a flip wouldn't with 3500 spring hangers. I bought when the b-i-l spun out on meth and since sold it to a neighbor |
Re: 2wd swap
I just welded the ends of the flip brackets to the leaf pads on the housing. Kept them from moving. Did the welds where I could easily buzz it off if/when desired.
|
Re: 2wd swap
Quote:
Why we used new pads. |
Re: 2wd swap
Quote:
|
Re: 2wd swap
1 Attachment(s)
Rotor fits in the wheel center. Was really concerned they wouldn't.
But the rotor got swallowed up in a 20" wheel. |
Re: 2wd swap
What diameter rotor? 13" (12.8) or ??
|
Re: 2wd swap
Quote:
11.9 according to the order. Powerstop rotors. Seems like enough room for a pad swap with out taking the wheels off. Ha ! |
Re: 2wd swap
Ahh.... Replacement C10 size. I though you might have upsized.
|
Re: 2wd swap
Quote:
But they backordered til end of August so got the 20's and the rotor looks silly in there |
All times are GMT -4. The time now is 08:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com