Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

Looks great more pics please:chevy:

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

pics x 2

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

Pics!!!!

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

getting there

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

that looks really good,mind me asking, but what kind of tubing did you use for your link arms? is it seamless, the reason i ask is if it is not seamless it might not be strong enough, just my opinion, especially with 600 horse and rockwells, correct me if I am wrong.

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

the four link bars are not seamless they are mild steel 2 x 2 3/8 thick. all the brackets are 3/8's plate. everything else is 1/8 thick ( all cross members, metal used to box frame, all of it is 1/8 ). the round ends on my bars are seamless chromemoly ( i paid like a $100.00 for 30 inches )

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

beep beep pics

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

badass frame

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

:wop:

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

i have about 60 new pictures but i am having trouble moving them from kodak easy share. key word (easy). any help????

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

i have a work party planed saturday on the cab. finishing the repairs to the cab is the biggest thing i have left to do.

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

Somebody help him get these pics uploaded !!!!!!!!!!!!!!!!!!!

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

Today I ran my fuel line, tranny lines, and oil cooler lines. They are all braided stainless. I CUT THEM TO LENGTH PUT THE ENDS ON THEM. TOOK THE HOSES TO THE LOCAL LUBE SHOP AND GOT ALL THE ENDS CREMPTED. CAME BACK PUT THE LINES ON AND STARTED STRAPPING THEM. THEY ARE LOOKING GREAT. TOMORROW I AM GOING TO WORK ON THE CAB. I WAS JUST NOTICING THAT IT HAS BEEN A YEAR SINCE I HAVE WORKED ON THE CAB. THAT IS PRETTY BAD, BUT I HAVE GOTTIN A LOT DONE ON THE REST OF THE TRUCK.

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

does it require a program on your computer?

I prefer photobucket for large picture uploads...

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

When the pictures were put on there a year ago (hard to believe it has been that long ago) a friend of my wife was over any i asked her if she knew anything about placing pictures and she had them up in a few minutes. She did not use any other sites. I have been trying to get her over but our timing is off.

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

If there is a cable with it then just plug it into your computer... go to MY COMPUTER and you should see a camera image there.... Your pics should be hidden in there somewhere... Just copy and paste them into a folder in MY PICTURES...

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

YESTERDAY I WORKED ON MY CAB FOR ABOUT 4 HOURS GOT A GOOD BIT DONE. IT IS LOOKING GREAT.:wop:

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

it looks like i got this picture thing figured out. so i'll post some on thursday.

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

a few pictures

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

these are in no order. but the last one is my bed floor. it holds no water & washes easy:lol:

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

#2 fuel cell & oil cooler mock up; #3 tinted bed liner; #4 rear view of suspention; #5 more tinted bed liner

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

#1 front; #2 tape over hole on pan is for oil temp. send.; #3 hydro steering; #4 & #5 view from up stairs

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

#1 bed floor; #2 cab; #4 & #5 left is oil cooler right is trans cooler

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

the last pictue is fuel & trans lines

Re: 72' Stepside 2 1/2 Rockwell Pond Truck
 

#1 fuel filter; #2 oil cooler lines; #3 trans & fuel; #4 oil cooler adapter; #5 transmission