|
Re: 1987 Chevrolet K10 to K20 and repairs
2 Attachment(s)
pulled the front axle out
|
Re: 1987 Chevrolet K10 to K20 and repairs
2 Attachment(s)
pulled some of the front suspension off and removed the steering box to check for cracks
|
Re: 1987 Chevrolet K10 to K20 and repairs
1 Attachment(s)
wire brushed the frame where the steering box mounts and die checked it for cracks. Sure enough I had one and believe this might be where I was hearing a popping noise in the front end while flexed
|
Re: 1987 Chevrolet K10 to K20 and repairs
This thing is bad*ss.
|
Re: 1987 Chevrolet K10 to K20 and repairs
2 Attachment(s)
Drilled the cracks and welded them up. Got these steering box support brackets from roughcountry.com when I ordered the lift.
|
Re: 1987 Chevrolet K10 to K20 and repairs
1 Attachment(s)
Painted it and bolted the steering box back into place. I didnt get any pictures of it but I pulled the rotor to change out wheel bearings on this side and rebuilt the hubs for both sides.
|
Re: 1987 Chevrolet K10 to K20 and repairs
Sweet build
|
| All times are GMT -4. The time now is 05:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com